Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual ENGINE SECTION Engine Lubrication System MSA5TCD00L16133

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5TCD00L16133 documenatation <<

Text preview - extract from the document
                                                        DIAGNOSTICS                                           [K100] 2-4
                                                                             1. Engine Lubrication System Trouble in General

1. Engine Lubrication System Trouble in General
Before performing diagnostics, make sure that the engine oil level is correct and no oil leakage exists.
        Trouble                                             Possible cause                                    Corrective action
                            1) Oil pressure switch     Cracked diaphragm or oil leakage within switch      Replace.
                            failure                    Broken spring or seized contacts                    Replace.
                                                       Clogged oil filter                                  Replace.
                                                       Malfunction of oil by-pass valve of oil filter      Clean or replace.
                                                       Malfunction of oil relief valve of oil pump         Clean or replace.
1. Warning light            2) Low oil pressure        Clogged oil passage                                 Clean.
remains on.                                            Excessive tip clearance and side clearance of oil
                                                       pump rotor and gear
                                                       Clogged oil strainer or broken pipe                 Clean or replace.
                                                       Insufficient engine oil                             Replenish.
                            3) No oil pressure         Broken pipe of oil strainer                         Replace.
                                                       Stuck oil pump rotor                                Replace.
                            1)   Burn-out bulb                                                             Replace.
2. Warning light does
                            2)   Poor contact of switch contact points                                     Replace.
not go on.
                            3)   Disconnection of wiring                                                   Repair.
                            1)   Poor contact at terminals                                                 Repair.
                            2)   Defective wiring harness                                                  Repair.
3. Warning light flickers
momentarily.                                                                                               Check for the same
                            3) Low oil pressure                                                            possible causes as
                                                                                                           listed in 1.--2).




◦ Jabse Service Manual Search 2021 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo