Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual ENGINE SECTION Engine MSA5TCD00L16120
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD00L16120 documenatation <<Text preview - extract from the document2-3 [W3A1] SERVICE PROCEDURE
3. Timing Belt
3. Timing Belt 6) Remove front belt cover.
A: REMOVAL
1. CRANKSHAFT PULLEY AND BELT
COVER
1) Remove A/C belt. (With A/C model)
B2M2587A
2. TIMING BELT
1) Remove timing belt guide. (MT vehicles only)
B2M2584
2) Remove A/C belt tensioner. (With A/C model)
S2M0294
B2M2585
3) Remove crankshaft pulley bolt. To lock
crankshaft, use ST.
ST 499977100
CRANKSHAFT PULLEY WRENCH
H2M2393C
4) Remove crankshaft pulley.
5) Remove belt cover (LH).
14
SERVICE PROCEDURE [W3A2] 2-3
3. Timing Belt
2) If alignment mark (a) and/or arrow mark (which (2) Using white paint, put alignment and/or
indicates rotation direction) on timing belt fade arrow marks on timing belts in relation to the
away, put new marks before removing timing belt crank sprocket and cam sprockets.
as shown in procedures below.
(1) Turn crankshaft using ST. Align mark (a) of
sprocket to cylinder block notch (b) and ensure
that right side cam sprocket mark (c), cam cap
and cylinder head matching surface (d) and/or
left side cam sprocket mark (e) and belt cover
notch (f) are properly adjusted.
ST 499987500 CRANKSHAFT SOCKET
B2M2591
Specified data:
Z1: 44 tooth length
Z2: 40.5 tooth
B2M2590A
B2M3434A
3) Remove belt idler (No. 2).
4) Remove belt idler No. 2.
S2M1008
5) Remove timing belt.
B2M3430A
B2M3435
15
2-3 [W3A3] SERVICE PROCEDURE
3. Timing Belt
3. BELT IDLER AND AUTOMATIC BELT 2) Remove crankshaft sprocket.
TENSION ADJUSTER ASSEMBLY
1) Remove belt idler (No. 1).
B2M2600C
B2M2596
2) Remove automatic belt tension adjuster assem-
bly.
S2M0414C
3) Remove belt cover No. 2 (LH).
4) Remove belt cover No. 2 (RH).
CAUTION:
H2M2375
Do not damage or lose the seal rubber when
removing belt covers.
4. CAMSHAFT AND CRANKSHAFT
SPROCKET
1) Remove camshaft sprocket No. 1 and No. 2. To
lock camshaft, use ST.
ST 499207100 CAMSHAFT SPROCKET
WRENCH
B2M2601
5) Remove tensioner bracket.
H2M2377A
H2M2380
16
SERVICE PROCEDURE [W3B5] 2-3
3. Timing Belt
B: INSPECTION
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo