Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual ENGINE SECTION Exhaust System MSA5TCD00L16681

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD00L16681


>> Download MSA5TCD00L16681 documenatation <<

Text preview - extract from the document
2-9   [W1A0]                         SERVICE      PROCEDURE
1. Front and Center Exhaust Pipe Assembly


1. Front and Center Exhaust                           5) Separate front and center exhaust pipe assem-
                                                      bly from rear exhaust pipe.
Pipe Assembly
                                                      WARNING:
A: REMOVAL                                            Be careful, exhaust pipe is hot.
1) Disconnect battery ground cable.




                                                                                            B2M3109

                                      G6M0095         6) Remove under cover.
2) Disconnect front oxygen (A/F) sensor connec-
tor.




                                                                                            B2M2920

                                                      7) Remove bolts which hold front exhaust pipe
                                      B2M3439         onto cylinder heads.
3) Lift-up the vehicle.                               CAUTION:
4) Disconnect rear oxygen sensor connector.           Be careful not to pull down front and center
                                                      exhaust pipe assembly.




                                      B2M3440
                                                                                            B2M3200




                                                  4
                                   SERVICE PROCEDURE                                        [W1B0] 2-9
                                                                1. Front and Center Exhaust Pipe Assembly


8) Remove bolt which installs front and center         B: INSTALLATION
exhaust pipe assembly to hanger bracket.
                                                       1) Install front exhaust pipe to center exhaust
                                                       pipe.
                                                       CAUTION:
                                                       Replace gaskets with new ones.
                                                       Tightening torque:
                                                           30



◦ Jabse Service Manual Search 2021 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo