Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual ENGINE SECTION Fuel Injection System MSA5TCD00L16164

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD00L16164


>> Download MSA5TCD00L16164 documenatation <<

Text preview - extract from the document
2-7   [W10A1]                      SERVICE PROCEDURE
10. Throttle Position Sensor


5) Connect battery ground cable.                   10. Throttle Position Sensor
                                                   A: REMOVAL AND INSTALLATION
                                                   1. MT VEHICLES
                                                   1) Disconnect battery ground cable.




                                    B2M1723




                                                                                           B2M1723

                                                   2) Disconnect connector from throttle position
                                                   sensor.




                                                                                           B2M3659

                                                   3) Remove throttle position sensor holding
                                                   screws, and remove throttle position sensor itself.




                                                                                           B2M2757




                                              42
                                      SERVICE PROCEDURE                                          [W10B1] 2-7
                                                                                    10. Throttle Position Sensor


4) Installation is in the reverse order of removal.        3) Remove throttle position          sensor   holding
CAUTION:                                                   screws, and remove it.
When installing throttle position sensor, adjust
the position to match with the specified data.
Tightening torque:
    2.2



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo