Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual ENGINE SECTION On Car Services MSA5TCD00L16105

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5TCD00L16105 documenatation <<

Text preview - extract from the document
2-2   [W4A0]                          SERVICE PROCEDURE
4. Engine Compression

4. Engine Compression
After warming-up, engine becomes very hot.
Be careful not to burn yourself during mea-
1) After warming-up the engine, turn ignition
switch to OFF.
2) Make sure that the battery is fully charged.
3) Release fuel pressure. 
4) Remove all the spark plugs. 
5) Fully open throttle valve.
6) Check the starter motor for satisfactory perfor-
mance and operation.
7) Hold the compression gauge tight against the
spark plug hole.
When using a screw-in type compression
gauge, the screw (put into cylinder head spark
plug hole) should be less than 18 mm (0.71 in)
8) Crank the engine by means of the starter motor,
and read the maximum value on the gauge when
the pointer is steady.


9) Perform at least two measurements per
cylinder, and make sure that the values are correct.
Compression (350 rpm and fully open
    1,216 kPa (12.4 kg/cm2, 176 psi)
    941 kPa (9.6 kg/cm2, 137 psi)
  Difference between cylinders;
    49 kPa (0.5 kg/cm2, 7 psi), or less


◦ Jabse Service Manual Search 2021 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo