Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual ELECTRICAL SECTION Body Electrical System MSA5TCD00L16048

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD00L16048


>> Download MSA5TCD00L16048 documenatation <<

Text preview - extract from the document
                                       SERVICE PROCEDURE                                          [W11A2] 6-2
                                                                                              11. Front Fog Light


10. Dome/Rear Reading Lights                                 11. Front Fog Light
A: REMOVAL AND INSTALLATION                                  A: REMOVAL AND INSTALLATION
NOTE:                                                        1. EXCEPT OUTBACK
While sitting in the vehicle, be sure to touch the
metal frame of the vehicle to allow all static elec-         1) Lower the front of the mudguard just enough to
tricity to be discharged prior to handling the dome          facilitate subsequent procedures.
light and the replacement dome light.                        2) Disconnect connector.
                                                             3) Remove bolts and then remove front fog light.
1) Disconnect GND cable from battery.
2) Remove dome light lens by inserting a small flat
tipped screwdriver into center slot of the front face
of the lens and press downward, causing the lens
to bow and disengage from the mounting tabs.




                                                                                                      B6M1331

                                                             4) Installation is in the reverse order of removal.
                                                             2. OUTBACK
                                          B6M1329
                                                             1) Turn stone guard counterclockwise and then
3) Remove screws and then detach dome light                  remove stone guard.
while disconnecting connectors.
NOTE:
Take care not to touch the circuit board.




                                                                                                      B6M1332

                                                             2) Remove bolts.
                                          B6M1330

4) Installation is in the reverse order of removal.




                                                                                                      B6M1333




                                                        21



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo