Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual ELECTRICAL SECTION Body Electrical System MSA5TCD00L16051

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD00L16051 documenatation <<

Text preview - extract from the document

6-2   [W12A4]                        SERVICE PROCEDURE
13. Keyless Entry System


4. CRUISE CONTROL MODULE                                   13. Keyless Entry System
1) Remove glove box. 
2) Remove nut, then remove cruise control mod-
                                                           A: REMOVAL AND INSTALLATION
ule (A) and the other electrical control module (B)        1. KEYLESS ENTRY CONTROL MODULE
while disconnecting connector.
                                                           1) Disconnect battery ground cable.
                                                           2) Remove glove box. 
                                                           3) Remove nut, then remove keyless entry control
                                                           module (B) and the other electrical control module
                                                           (A) while disconnecting connector.




                                       B6M1338A

3) Disconnect cruise control module and the other
electrical control module.
4) Installation is in the reverse order of removal.
                                                                                                  B6M1338A
5. STOP AND BRAKE SWITCH
                                                           4) Disconnect keyless entry control module and
Disconnect connector from switch, then remove              the other electrical control module.
the switch.                           5) Installation is in the reverse order of removal.
6. CLUTCH SWITCH
Disconnect connector from switch, then remove
the switch. 




                                                      24

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo