Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD00L17538
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD00L17538 documenatation <<Text preview - extract from the document SERVICE PROCEDURE [W4A0] 4-4
4. Parking Brake (Rear Disc Brake)
4. Parking Brake (Rear Disc Brake)
A: REMOVAL
B4M1840A
(1) Back plate (7) Strut spring (13) Adjuster
(2) Retainer (8) Strut (14) Shoe hold-down cup
(3) Spring washer (9) Shoe guide plate (15) Shoe hold down spring
(4) Lever (10) Primary return spring (16) Shoe hold down pin
(5) Parking brake shoe (Primary) (11) Secondary return spring (17) Adjusting hole cover
(6) Parking brake show (Secondary) (12) Adjusting spring
1) Remove the two mounting bolts and remove NOTE:
the disc brake assembly. If the disc rotor is difficult to remove try the follow-
ing two methods in order.
(1) Turn adjusting screw using a slot-type
screwdriver until brake shoe gets away enough
from the disc rotor.
B4M1710
2) Suspend the disc brake assembly so that the
hose is not stretched.
3) Pull down and release parking brake.
4) Remove the disc rotor. B4M1841A
33
4-4 [W4B0] SERVICE PROCEDURE
4. Parking Brake (Rear Disc Brake)
(2) If disc rotor seizes up within hub, drive disc B: INSPECTION
rotor out by installing an 8-mm bolt in holes B on
the rotor. 1) Measure brake disc inside diameter. If the disc
is scored or worn, replace the brake disc.
Disc inside diameter:
Standard
170 mm (6.69 in)
Service limit
171 mm (6.73 in)
2) Measure the lining thickness. If it exceeds the
limit, replace shoe assembly.
Lining thickness:
G4M0383 Standard
3.2 mm (0.126 in)
5) Remove shoe return spring from parking brake Service limit
assembly.
1.5 mm (0.059 in)
6) Using a standard screwdriver, remove front
shoe hold down spring and pin. CAUTION:
Replace the brake shoes on the right and left
brake assembly at the same time.
C: INSTALLATION
CAUTION:
Be sure lining surface is free from oil contami-
nation.
Brake grease:
Dow Corning Molykote No. 7439 (Part No.
725191460)
B4M1842
1) Apply brake grease to the following places.
7) Remove strut and strut spring.
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo