Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual MECHANICAL COMPONENTS SECTION BRAKES MSA5TCD00L17538

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD00L17538


>> Download MSA5TCD00L17538 documenatation <<

Text preview - extract from the document
                                       SERVICE PROCEDURE                                              [W4A0] 4-4
                                                                                  4. Parking Brake (Rear Disc Brake)


4. Parking Brake (Rear Disc Brake)
A: REMOVAL




                                                                                                                  B4M1840A


(1)   Back plate                       (7)    Strut spring                         (13)   Adjuster
(2)   Retainer                         (8)    Strut                                (14)   Shoe hold-down cup
(3)   Spring washer                    (9)    Shoe guide plate                     (15)   Shoe hold down spring
(4)   Lever                            (10)   Primary return spring                (16)   Shoe hold down pin
(5)   Parking brake shoe (Primary)     (11)   Secondary return spring              (17)   Adjusting hole cover
(6)   Parking brake show (Secondary)   (12)   Adjusting spring

1) Remove the two mounting bolts and remove                    NOTE:
the disc brake assembly.                                       If the disc rotor is difficult to remove try the follow-
                                                               ing two methods in order.
                                                                  (1) Turn adjusting screw using a slot-type
                                                                  screwdriver until brake shoe gets away enough
                                                                  from the disc rotor.




                                          B4M1710

2) Suspend the disc brake assembly so that the
hose is not stretched.
3) Pull down and release parking brake.
4) Remove the disc rotor.                                                                                   B4M1841A




                                                          33
4-4   [W4B0]                           SERVICE PROCEDURE
4. Parking Brake (Rear Disc Brake)


   (2) If disc rotor seizes up within hub, drive disc        B: INSPECTION
   rotor out by installing an 8-mm bolt in holes B on
   the rotor.                                                1) Measure brake disc inside diameter. If the disc
                                                             is scored or worn, replace the brake disc.
                                                             Disc inside diameter:
                                                               Standard
                                                                 170 mm (6.69 in)
                                                               Service limit
                                                                 171 mm (6.73 in)
                                                             2) Measure the lining thickness. If it exceeds the
                                                             limit, replace shoe assembly.
                                                             Lining thickness:
                                          G4M0383              Standard
                                                                  3.2 mm (0.126 in)
5) Remove shoe return spring from parking brake                Service limit
assembly.
                                                                  1.5 mm (0.059 in)
6) Using a standard screwdriver, remove front
shoe hold down spring and pin.                               CAUTION:
                                                             Replace the brake shoes on the right and left
                                                             brake assembly at the same time.
                                                             C: INSTALLATION
                                                             CAUTION:
                                                             Be sure lining surface is free from oil contami-
                                                             nation.
                                                             Brake grease:
                                                                 Dow Corning Molykote No. 7439 (Part No.
                                                                 725191460)
                                          B4M1842
                                                             1) Apply brake grease to the following places.
7) Remove strut and strut spring.                            



◦ Jabse Service Manual Search 2021 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo