Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual MECHANICAL COMPONENTS SECTION SUSPENSION MSA5TCD00L17477

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document
MSA5TCD00L17477


>> Download MSA5TCD00L17477 documenatation <<

Text preview - extract from the document
                                  SERVICE PROCEDURE       [W1A0] 4-1
                                                      1. On-car Services


1. On-car Services
A: WHEEL ALIGNMENT
PROCEDURES
Check, adjust and/or measure wheel alignment in
accordance with procedures indicated in figure:




                                                               B4M1088A




                                                  5
4-1   [W1B1]                         SERVICE PROCEDURE
1. On-car Services


B: INSPECTION AND ADJUSTMENT
1. WHEEL ARCH HEIGHT (FRONT AND
REAR)
1) Adjust tire pressure to specifications.
2) Set vehicle under "curb weight" conditions.
(Empty luggage compartment, install spare tire,
jack, service tools, and top up fuel tank.)
3) Set steering wheel in a wheel-forward position.
4) Suspend thread from wheel arch (point "A" in
figure below) to determine a point directly above
center of spindle.
5) Measure distance between measuring point "A"
and center of spindle.




                                                                                                                  B4M1783A


                                                            Specified wheel arch height
         Model
                                            Front                                            Rear
        Sedan                388+12/-24   mm (15.28+0.47/-0.94 in)              371+12/-24 mm (14.61+0.47/-0.94 in)
        Wagon                388+12/-24   mm (15.28+0.47/-0.94 in)              381+12/-24 mm (15.00+0.47/-0.94 in)
       OUTBACK               424+12/-24   mm (16.69+0.47
                                                         /-0.94 in)             421+12/-24 mm (16.57+0.47/-0.94 in)




                                                          6
                                        SERVICE PROCEDURE                                        [W1B2] 4-1
                                                                                             1. On-car Services


2. CAMBER (FRONT AND REAR)                                  2) Turn camber adjusting bolt so that camber is
                                                            set at the specification.



◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo