Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual MECHANICAL COMPONENTS SECTION SUSPENSION MSA5TCD00L17479

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5TCD00L17479 documenatation <<

Text preview - extract from the document
                                       SERVICE PROCEDURE                                               [W3C0] 4-1
                                                                                                   3. Front Ball Joint

3. Front Ball Joint                                             (3) Calculate plays from the following formula.
                                                                S= 2- 1
A: REMOVAL                                                      (4) When plays are larger than the following
                                                                value, replace with a new one.
1) Remove the wheel.
2) Pull out the cotter pin from the ball stud, remove        FRONT BALL JOINT
the castle nut, and extract the ball stud from the             Specified play for replacement: S
transverse link.                                                 Less than 0.3 mm (0.012 in)
3) Remove the bolt securing the ball joint to the            2) When play is smaller than the specified value,
housing.                                                     visually inspect the dust cover.
                                                             3) The ball joint and cover that have been
                                                             removed must be checked for wear, damage or
                                                             cracks, and any defective part must be replaced.
                                                             4) If the dust cover is damaged, replace with the
                                                             new ball joint.

                                                             C: INSTALLATION
                                                             1) Install ball joint onto housing.
                                                             Torque (Bolt):
                                          G4M0499                49 N

◦ Jabse Service Manual Search 2021 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo