Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual MECHANISM AND FUNCTION SECTION Seats, Seat Belts and Interior MSA5TCD00L18267

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download MSA5TCD00L18267 documenatation <<

Text preview - extract from the document

             LEGACY (W2260BE_SGML Complete)



                              MECHANISM AND FUNCTION                                [M3A0]    5-3
                                                                                       3. Seat Belt


3. Seat Belt
A: ADJUSTABLE SHOULDER ANCHOR
The front seat belt has a mechanism that allows the occupant to select the most appropriate shoul-
der anchor height from among the five positions [changeable within 129 mm (5.08 in) range].




                                                                                         B5H0605A




                                                7
                        LEGACY (W2260BE_SGML Complete)



5-3      [M3B0]                 MECHANISM AND FUNCTION
3. Seat Belt


B: REAR CENTER THREE-POINT TYPE SEAT BELT (SEDAN)
A three-point type seat belt is available for a passenger who sits at the center of the rear seat.
The ELR is installed on the luggage shelf at the center of the vehicle.




                                                                                          B5H0792A


              (1) ELR


C: REAR CENTER THREE-POINT TYPE SEAT BELT (WAGON)
A three-point type seat belt is available for a passenger who sits at the center of the rear seat.
The ELR is installed on the ceiling at the rear right of the vehicle.




                                                                                          B5H0606A

              (1) ELR
              (2) Bracket




                                                  8
             LEGACY (W2260BE_SGML Complete)



                                MECHANISM AND FUNCTION                                   [M3E0]    5-3
                                                                                            3. Seat Belt


D: BELT IN SEAT
The front inner belt is now integral with the front seat. This keeps the relative positions of the occu-
pant and the front inner belt always constant, irrespective of the adjustments of the front seat posi-
tion.
When an impact is applied to the occupant in a collision, the inner belt is pulled together with the
upper hook in the direction of the arrow to engage the upper hook with the lower hook. As a result,
the impact load is transmitted to the vehicle body and dispersed.




                                                                                               H5H0807


              (1) Inner belt
              (2) Upper hook
              (3) Lower hook


E: AUTOMATIC ELR
When the webbing of the front seat belt (passenger side) and rear seat belts (right and left side)
are once drawn out completely, its retractor is changed to the automatic locking condition to se-
curely install the child restraint system. In this condition, the webbing can be retracted but cannot
be extended. When the belt is retracted to some extent, this condition is released.




                                                                                               B5H0328




                                                   9
                         LEGACY (W2260BE_SGML Complete)



5-3      [M3F1]                  MECHANISM AND FUNCTION
3. Seat Belt


F: PRETENSIONER
1. CONSTRUCTION
The driver side and front passenger side seat belts are equipped with seat belt pretensioner.
The pretensioner sensor consists of the front sub sensor and a sensor inside the airbag control
module. If the sensors detect a certain predetermined amount of force during a frontal or front-
angled collision, the front seat belt is quickly drawn back in by the retractor to take up the slack
so that the belt effectively restrains the front seat occupant. If the force applied on the seat belt
becomes excessive and exceeds a predetermined value, the torsion bar is twisted to allow the
webbing to be reeled out, thus lessening the load imposed on the thorax. Once the seat belt pre-
tensioner has been activated, the seat belt retractor remains being locked.




                                                                                            B5H0828A


              (1) Webbing
              (2) ELR
              (3) Rack
              (4) Pinion gear
              (5) Torsion bar




                                                   10
         LEGACY (W2260BE_SGML Complete)



                          MECHANISM AND FUNCTION   [M3F2]    5-3
                                                      3. Seat Belt


2. FUNCTION




                                                        B5H0630A




                                          11
                  LEGACY (W2260BE_SGML Complete)



5-3      [M3F3]           MECHANISM AND FUNCTION
3. Seat Belt


3. CAUTION LABEL




                                                   B5H0829




                                            12

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo