Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION Automatic Transmission and Differential MSA5TCD00L18809

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download MSA5TCD00L18809 documenatation <<

Text preview - extract from the document
                                   SERVICE PROCEDURE                                        [W5A0] 3-2
                                                                5. Duty Solenoid C and Transfer Valve Body

5. Duty Solenoid C and                                 4) Remove front exhaust pipe.
                                                       Disconnect oxygen sensor connector, and remove
Transfer Valve Body                                    front and center exhaust pipe.
A: REMOVAL                                             

1) Remove air intake duct and chamber.


                                                       5) Remove heat shield cover.
                                      B2M3101          6) Remove propeller shaft.
2) Remove pitching stopper.
                                                       Before removing propeller shaft, scribe matching
                                                       marks on propeller shaft and rear differential cou-


3) Raise vehicle and drain ATF.


                                                       7) Remove rear crossmember.
                                                          (1) Support transmission using a transmission
                                                          jack and raise slightly.
                                                          (2) Remove bolts and nuts as shown in Figure.



3-2   [W5B0]                           SERVICE         PROCEDURE
5. Duty Solenoid C and Transfer Valve Body

8) Remove vehicle speed sensor 1 (rear).                    10) Disconnect duty solenoid C (transfer) connec-
                                                            11) Remove duty solenoid C (transfer) and trans-
                                                            fer valve body.


9) Remove extension and gasket.
   (1) Remove select cable nut.                                                                    B3M1045A

                                                            B: INSTALLATION
                                                            1) Install duty solenoid C and transfer valve body.
                                                               (1) Install duty solenoid C and transfer valve
                                                            Tightening torque:
                                                                T: 8

◦ Jabse Service Manual Search 2021 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo