Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION Automatic Transmission and Differential MSA5TCD00L18852
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD00L18852 documenatation <<Text preview - extract from the document3-2 [T8R11] DIAGNOSTICS
9. Diagnostic Chart with Select Monitor
5) Measure signal voltage indicated on oscillo- 9. Diagnostic Chart with Select
scope.
Monitor
A: BASIC DIAGNOSTIC CHART
If no trouble codes appear in the on-board diag-
nostics operation (although problems have
occurred or are occurring), measure performance
characteristics of sensors, actuators, etc., in the
Subaru Select Monitor and compare with the
"basic data" to determine the cause of problems.
1) Trouble occurs.
B3M0244A 2) No trouble codes appear in on-board diagnos-
tics operation.
: Is the signal voltage more than AC 1 3) Measure each item using Subaru Select Moni-
V? tor.
: Even if "AT OIL TEMP" lights up, the 4) Compare measured values with basic data.
circuit has returned to a normal condi- 5) Determine item which is outside basic data
tion at this time. A temporary poor con- specifications.
tact of the connector or harness may be 6) Check sensor and actuator affected.
the cause. Repair harness or connector
in the TCM and transmission. B: BATTERY VOLTAGE
: Go to step 8R11.
9B1 : CHECK BATTERY VOLTAGE.
8R11 : CHECK POOR CONTACT.
1) Turn ignition switch to OFF.
2) Connect Subaru Select Monitor to data link
: Is there poor contact in vehicle speed
sensor 1 circuit? connector.
: Repair poor contact.
: Replace TCM.
B3M1574
3) Start the engine, and engine idling after warm-
up.
4) Turn Subaru Select Monitor switch to ON.
5) Read data of battery voltage using Subaru
Select Monitor.
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo