Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION Manual Transmission and Differential MSA5TCD00L18778

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
MSA5TCD00L18778


>> Download MSA5TCD00L18778 documenatation <<

Text preview - extract from the document
3-1   [W7A0]                              SERVICE PROCEDURE
7. Center Differential


6) Position drive axle shaft in differential case and        7. Center Differential
hold it with outer snap ring (28). Using a thickness
gauge, measure clearance between the shaft and               A: DISASSEMBLY AND ASSEMBLY
case is within specifications.                               1) Remove ball bearing using ST.
NOTE:                                                        CAUTION:
If it is not within specifications, replace snap ring        Do not reuse ball bearing.
with a suitable one.
                                                             ST   498077300     CENTER DIFFERENTIAL
Clearance:                                                                      BEARING REMOVER
    0 -- 0.2 mm (0 -- 0.008 in)




                                                                                                      B3M1398A
                                             B3M0100
                                                             2) Install ball bearing to center differential assem-
                                                             bly.
                   Snap ring (Outer-28)
          Part No.                Thickness mm (in)
                                                             CAUTION:
                                                             Do not apply pressure in excess of 10 kN (1 ton,
         805028011                   1.05 (0.0413)
                                                             1.1 US ton, 1.0 Imp ton).
         805028012                   1.20 (0.0472)
                                                             NOTE:
                                                             Do not disassemble center differential because it is
                                                             a non-disassemble part.




                                                                                                      B3M1399A




                                                        48



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo