Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Subaru Legacy 2000-2003 Approved Subaru Legacy 2000 2000 Service Manual TRANSMISSION AND DIFFERENTIAL SECTION Transmission Control System MSA5TCD00L18832
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download MSA5TCD00L18832 documenatation <<Text preview - extract from the document3-3 [W1A0] SERVICE PROCEDURE
1. Gear Shift Lever
1. Gear Shift Lever 6) Remove gear shift lever.
A: REMOVAL
1) Remove console box.
2) Remove plate from the body.
G3M0683
B: DISASSEMBLY
B3M1757
1) Disconnect locking wire (A).
3) Remove stay from bracket.
B3M0617B
G3M0681
2) Remove rod (A) from lever.
4) Remove rod (A) from joint.
B3M0618B
B3M0616B 3) Remove snap ring (A) from bush (B), then dis-
connect lever from stay.
5) Remove the exhaust cover and remove cush- 4) Remove boot (C) from lever.
ion rubber (A) from the body.
B3M0619B
B3M1503A
4
SERVICE PROCEDURE [W1D0] 3-3
1. Gear Shift Lever
5) Remove O-ring (A), then disconnect bush (Stay C: INSPECTION
rear) (B).
Check each parts (Bush (A), cushion (B), spacer
(C), boot (D), stay (E) and rod (F) etc.) for
deformation, damage and wear. Repair or replace
any defective parts. Determine defective parts by
comparing with new parts.
B3M0620B
6) Draw out spring pin (A), then remove bush
(Shift lever) (B) from lever.
B3M0621B
B3M1765A
D: ASSEMBLY
1) Clean all parts before assembly.
2) Mount the bush (Stay front) (A) and cushion
rubber (B) on the stay.
B3M0830C
5
3-3 [W1E0] SERVICE PROCEDURE
1. Gear Shift Lever
3) Mount each parts (Boot (A), O-ring (B), bush 7) Tighten with locking wire (A) to the extent that
(C), spacer (D), bush (Shift lever) (E), bush (Stay the boot will not come off.
rear) (F) and spring pin (G)) on the lever. CAUTION:
CAUTION: Always use new locking wire.
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo