Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm be wawsy insp

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
insp


>> Download insp documenatation <<

Text preview - extract from the document
                                                                                                                              BE-39
                                       BODY ELECTRICAL       -        WIPER AND WASHER SYSTEM
                                                                                                                                BE1F8-01


                                                  INSPECTION
                                                  1.     INSPECT WIPER AND WASHER SWITCH CONTINU-
                                   MIST
                                    OFF                  ITY
                                       INT              Switch position            Tester connection            Specified condition

                                       LO                    MIST                        7-8                Continuity

                                       HI                     OFF                        6-7                Continuity

                          Washer ON                INT (w/ Intermittent wiper)           6-7                Continuity
                                                                 LO                      7-8                Continuity
                                                                 HI                      8-9                Continuity
                                                          Washer ON                      4-5                Continuity
                                                  If continuity is not as specified, replace the switch.




             8       7 6 5 4

                                         I12361



                                                  2.     w/ Intermittent wiper:
                                                         INSPECT WIPER INTERMITTENT OPERATION
                      7        5                  (a)    Turn the wiper switch to INT position.
                                                  (b)    Turn the intermittent time control switch to FAST position.
                                                  (c)    Connect the positive (+) lead from the battery to terminal
                                                         8 and the negative (-) lead to terminal 5.
                  8                               (d)    Connect the positive (+) lead from the voltmeter to termi-
                                                         nal 7 and the negative (-) lead to terminal 5, check that
                                         I12093          the meter needle indicates battery positive voltage.

                                                  (e)    After connecting terminal 6 to terminal 8, connect to termi-
                                                         nal 8 to terminal 5, check the voltage rises from 0 volts to
                              5                          battery voltage with in the times, as shown in the table.
                                                   INT time control
                                                   switch position                              Voltage

                                                                             Approx. 1  3 sec.
                 8 6
                                                   FAST                                                   Battery positive voltage
                                         I12094                                                           0 Volt
                                                                             Approx. 10  15 secs.

                                                   SLOW
                                                                                                          Battery positive voltage
                                                                                                          0 Volt


                                                  If operation is not as specified, replace the wiper and washer
                                                  switch.



2002 ECHO (RM884U)

                                                                           Author :                    Date :                   1242
BE-40
                                     BODY ELECTRICAL    -   WIPER AND WASHER SYSTEM

                                               3.    INSPECT WASHER LINKED OPERATION
                                               (a)   Connect the positive (+) lead from the battery to terminal
                     7           5                   8 and the negative (-) lead to terminal 5.
                                               (b)   Connect the positive (+) lead from the voltmeter to termi-
                                                     nal 7 and the negative (-) lead to terminal 5.
                                               (c)   Push in the washer switch, and check that the voltage
                     8                               changes, as shown in the table.
                                                 Washer Switch ON
                                      I12093
                                                           OFF


                                                                              Less than 1 sec.    Approx. 3 secs.

                                                     Battery positive
                                                     voltage
                                                             0 Volt


                                               If operation is not as specified, replace the wiper and washer
                                               switch.

                                               4.    Low speed:
                         5            4
                                                     INSPECT WIPER MOTOR OPERATION
                                               Connect the positive (+) lead from the battery to terminal 5 and
                                               the negative (-) lead to terminal 4, check that the motor oper-
                                               ates at low speed.
                                               If operation is not as specified, replace the motor.



                                      I12335




                             3
                                               5.    High speed:
                                      4              INSPECT WIPER MOTOR OPERATION
                                               Connect the positive (+) lead from the battery to terminal 3 and
                                               the negative (-) lead to terminal 4, check that the motor oper-
                                               ates at high speed.
                                               If operation is not as specified, replace the motor.



                                      I12336




                             5
                                               6.    Stopping at stop position:
                                          4
                                                     INSPECT WIPER MOTOR OPERATION
                                               (a)   Operate the motor at low speed and stop the motor opera-
                                                     tion anywhere except at the stop position by disconnect-
                                                     ing positive (+) lead from terminal 5.




                                      I12337



2002 ECHO (RM884U)

                                                                   Author :              Date :               1243
                                                                                                BE-41
                         BODY ELECTRICAL      -   WIPER AND WASHER SYSTEM


                         2            (b)   Connect terminals 1 and 5.
                                 1    (c)   Connect the positive (+) lead from the battery to terminal
                                            2 and negative (-) lead to terminal 4, check that the motor
                                            stops running at the stop position after the motor operates
                             4              again.
                     5
                                      If operation is not as specified, replace the motor.



                             I12338



                 2                    7.    INSPECT WASHER MOTOR OPERATION
                                      Connect the positive (+) lead from the battery to terminal 2 and
                                      the negative (-) lead to terminal 1, check that the motor oper-
                                      ates.
                 1
                                      NOTICE:
                                      These tests must be performed quickly (within 20 seconds)
                                      to prevent the coil from burning out.
                                      If operation is not as specified, replace the motor.
                             I01272




2002 ECHO (RM884U)

                                                        Author :             Date :              1244



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo