Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm be wdlcs preche
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download preche documenatation <<
Text preview - extract from the document
BE-77
BODY ELECTRICAL - WIRELESS DOOR LOCK CONTROL SYSTEM
BE0IM-17
PRE-CHECK
Only wireless function (Remote control) will not operate.
(If a new transmitter or a transmitter of the same type that works properly with the vehicle is not available.)
Make the vehicle in the initialized condition:
The initialized condition is the condition when the following conditions are satisfied.
(1) Key plate has not been inserted in the ignition key cylinder.
(2) All the doors are closed. (Door warning light is off.)
(3) All the doors are locked.
Basic function check:
Under the standard operation, when repeating the operation of UNLOCK and LOCK switch
3 times or more alternately, check the UNLOCK-LOCK operation from 3rd time onward.
D Following procedures are standard operation.
(1) Keep about 1 M away to the right direction from the outside handle of a driver's seat.
(2) Face the transmitter toward the vehicle and press one of transmitter switches for about 1 sec.
No Yes
Normal
D Operative distance may differ according to
an operator, the way of holding the transmitter
or position.
D Because weak electric wave is used, when
there is strong wave or noise in the used
frequency ,operation distance might be
shortened.
2002 ECHO (RM884U)
Author : Date : 1281
BE-78
BODY ELECTRICAL - WIRELESS DOOR LOCK CONTROL SYSTEM
Transmitter battery check:
Yes
Battery faulty.
Replace the transmitter battery with a new or normal
one and check UNLOCK-LOCK function works under
the standard operation.
D The battery should be replaced by only the shops with
sufficient skill as new normal battery is necessary.
D Battery quality can be judged by checking the rem-
nant volume of the battery.
No
Make the vehicle be in the initialized condition.
Inspection start by using self diagnostic mode:
Enter into the self diagnostic mode.
If operating door control receiver in the order of 1 through 2, the mode turns to diagnostic mode.
(1) Insert the key plate in the ignition key cylinder and pull out, then insert it again and turn ignition switch
OFF ON OFF once within 5 seconds after pulling out.
(2) After completing the procedure within 30 seconds, turn the ignition switch OFF ON OFF 9 times.
HINT:
In the case that either of (1) and (2) conditions is not satisfied, transfer to normal mode.
When completing self diagnostic mode, turn the ignition switch ON.
LOCK and UNLOCK operation is not performed under the self diagnostic mode.
within. within.
5 secs. 30 secs.
Key plate
not inserted
Key plate
inserted
Ignition
switch 1 2 3 9 10
ON
OFF
1st time 9th times
2002 ECHO (RM884U)
Author : Date : 1282
BE-79
BODY ELECTRICAL - WIRELESS DOOR LOCK CONTROL SYSTEM
No
Is the method to enter into the
Self diagnostic mode operation check:
diagnostic mode correct?
After the self diagnostic mode input operation has No
been performed, check that the taillight. (Not entered in self
Yes
diagnostic mode)
Taillight Ignition switch OFF No Is the chirping function of operation
ON confirmation taillight normal?
OFF Yes
Check control taillight.
0.2 secs. 0.5 secs.
Key unlock warning switch inspection:
Yes
(Entered in self diagnostic mode) Check that continuity exists between
connector terminal 21 of door lock
control relay on the vehicle side and
ground by inserting the key plate into the
Self diagnostic mode check:
ignition key cylinder.
Check that how the taillight when pressing each
transmitter switch.
(1) Receiver normal wave of LOCK switch.
Check key unlock warning switch.
ON
Taillight
OFF
(4) is output.
0.2 secs. 0.5 secs. (All taillights response
(2) Receiver normal wave of UNLOCK switch. is same.)
ON
Taillight Recognition code registration function check:
OFF
Check that it is possible to enter into
0.2 secs. 0.5 secs. rewrite mode or add mode.
0.2 secs
(Refer to "Wireless door lock receiver and
(3) Receiver normal wave of PANIC switch.
transmitter" - "Recognition code registration".)
ON
Taillight
OFF
0.5 secs. 0.5 secs.
Wireless door lock operates
(4) Incompatibility of the recognition code or out
normally when recognition code
from synchronization of rolling code.
is registered.
ON
Taillight
OFF
While receiving
No response from taillight.
:
While turning the ignition switch ON in the self
diagnostic mode, the mode returns to normal mode.
(1), (2) or (3) are output.
2002 ECHO (RM884U)
Author : Date : 1283
BE-80
BODY ELECTRICAL - WIRELESS DOOR LOCK CONTROL SYSTEM
Yes
The wave reaching range check: Other body control system faulty.
(Transmitter and receiver are normal.)
Is the wave reaching range normal?
(1 M area around vehicle)
(While the transmitting switch is pressed, (approx.
20 secs.) the taillight continuously. After 20 secs.,
repress the switch again.)
No When pressing each switch of the new or
normal transmitter used in the same type
vehicle, check that all taillights chirps in
Transmitter faulty or wireless door lock receiver the same way.
faulty.
No Yes
Check the wave reaching range with another
transmitter (normal). When the range is normal,
transmitter defection is detected, the range is
not normal, wireless door lock receiver defection Transmitter faulty.
is defected.
Wireless door control receiver check:
Check that continuity exists between the receiver
Yes
terminal 3 (PRG) and door control relay terminal 23 Wire harness faulty (short circuit).
(PRG).
Check that continuity exists between the receiver
terminal 2 (RDA) and door control relay terminal 22
(RDA).
No
No
Check RDA terminal circuit. RDA terminal open circuit.
Check that the voltage of RDA is about 6 - 7 V
(when the transmitter is ON).
Yes
2002 ECHO (RM884U)
Author : Date : 1284
BE-81
BODY ELECTRICAL - WIRELESS DOOR LOCK CONTROL SYSTEM
No
+B power source check: DOME fuse or wire harness faulty.
Check that there is constantly 10 to 14 V voltage at the
connector terminal 5 (+B) of wireless door control
receiver.
Yes
No
Body ground check: Wire harness faulty.
Body ground open and contact error.
Check that continuity exists between the connector
terminal 1 (GND) of the wireless door control receiver
and body ground.
Yes
Wireless door control receiver faulty.
2002 ECHO (RM884U)
Author : Date : 1285
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo