Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di abs abswarni
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download abswarni documenatation <<Text preview - extract from the document DI-231
DIAGNOSTICS - ANTI-LOCK BRAKE SYSTEM
DI6ST-04
ABS Warning Light Circuit
CIRCUIT DESCRIPTION
If the ECU detects trouble, it lights the ABS warning light while at the same time prohibiting ABS control. At
this time, the ECU records a DTC in memory.
Connect terminals Tc and CG of the DLC3 make the ABS warning light blink and output the DTC.
WIRING DIAGRAM
ABS Actuator
with ECU
Combination Meter
17 5 30
P P
C13 ID3 A4 WA
ABS
Warning
2 Light 14
R-B W-B
C14 C14
Instrument Panel J/B
Ignition Switch
13 GAUGE 4
B-Y
1G 1O
2 IG1 AM1 1
1 AM1 8
W-L
1G 1O
1 2
Instrument Panel J/B
B (*1) 2 12
B-G (*2) W-B
1O 1F
FL Block
Battery
4 ALT
ID
*1: Puerto Pico
*2: Except Puerto Pico
F09222
F07
2002 ECHO (RM884U)
Author : Date : 401
DI-232
DIAGNOSTICS - ANTI-LOCK BRAKE SYSTEM
INSPECTION PROCEDURE
Troubleshoot in accordance with the table below for each trouble symptom.
ABS warning light does not light up *1
ABS warning light remains on *2
*1: Start the inspection from step 1 in case of using the TOYOTA hand-held tester and start from step 2 in
case of not using TOYOTA hand-held tester.
*2: After inspection with step 3, start the inspection from step 4 in case of using the TOYOTA hand-held
tester and start from step 5 in case of not using TOYOTA hand-held tester.
1 Check operation of the ABS warning light.
PREPARATION:
(a) Connect the TOYOTA hand-held tester to the DLC3.
(b) Turn the ignition switch ON and push the TOYOTA hand-held tester main switch ON.
(c) Select the ACTIVE TEST mode on the TOYOTA hand-held tester.
CHECK:
Check that "ON" and "OFF" of the ABS warning light can be shown on the combination meter by the
TOYOTA hand-held tester.
OK Check and replace ABS actuator assembly.
NG
2 Check ABS warning light.
See combination meter troubleshooting on page BE-2 .
NG Replace bulb or combination meter assembly.
OK
Check for open circuit in harness and connector between GAUGE fuse and ABS warning light.
(See page IN-29 ).
2002 ECHO (RM884U)
Author : Date : 402
DI-233
DIAGNOSTICS - ANTI-LOCK BRAKE SYSTEM
3 Check that the ECU connectors are securely connected to the ECU.
NO Connect the connector to the ECU.
YES
4 Check operation of the ABS warning light (See step 1).
OK Check and replace ABS actuator assembly.
NG
5 Is DTC output?
Check DTC on page DI-201 .
YES Repair circuit indicated by the code output.
NO
Check for short circuit in harness and connector between ABS warning light, DLC3 and ABS ECU
(See page IN-29 ).
2002 ECHO (RM884U)
Author : Date : 403
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo