Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di abs cic1241
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cic1241 documenatation <<Text preview - extract from the documentDI-222
DIAGNOSTICS - ANTI-LOCK BRAKE SYSTEM
DI6SP-04
DTC C1241 / 41 IG Power Source Circuit
CIRCUIT DESCRIPTION
This is the power source for the ECU, hence for the CPU, and ABS actuator.
DTC No. DTC Detecting Condition Trouble Area
Detection of any of conditions from 1. through 3.
1. With vehicle speed at 3 km/h or more, IG1 or +BS termi-
nal voltage is 8.5 V or below for 10 sec. or longer.
S Battery
2. With IG1 terminal voltage at 8.5 V or below, ABS sole-
C1241 / 41 S Charging system
noid relay open, ABS motor relay open, solenoid fault
S Power source circuit
detecting condition are established.
3. +BS terminal voltage is 19 V or above for 1 sec. or long-
er
WIRING DIAGRAM
ABS Actuator
Instrument Panel J/B with ECU
Ignition Switch
4 ECU-IG 3 3
1 2 B-Y B-L
1O 1B A4 IG
AM1 IG1 2 1
8 AM1 1
W-L
1O 1C
2 1
4 B (*1)
FL Block B-G (*2)
ALT ABS
2
5 B
A4 +BS
24
B
A4 +BM
BR 1
A4 GND1
23
W-B GND2
Battery A4
EC
*1: Puerto Rico
*2: Except Puerto Rico
F09224
2002 ECHO (RM884U)
Author : Date : 392
DI-223
DIAGNOSTICS - ANTI-LOCK BRAKE SYSTEM
INSPECTION PROCEDURE
1 Check ECU-IG fuse.
Instrument Panel J/B PREPARATION:
Remove ECU-IG fuse from Instrument Panel J/B.
CHECK:
Check continuity of ECU-IG fuse.
OK:
Continuity
ECU-IG
F08570
NG Check for short circuit in all the harness and
components connected to ECU-IG fuse (See at-
tached wiring diagram).
OK
2 Check battery positive voltage.
OK:
Voltage: 10 - 14 V
NG Check and repair the charging system
(See page IN-29 ).
OK
3 Check voltage of the ECU IG power source.
In case of using the TOYOTA hand-held tester:
PREPARATION:
(a) Connect the TOYOTA hand-held tester to the DLC3.
(b) Turn the ignition switch ON and push the TOYOTA hand-held tester main switch ON.
(c) Select the DATALIST mode on the TOYOTA hand-held tester.
CHECK:
Check the voltage condition output from the ECU displayed on the TOYOTA hand-held tester.
OK:
"Normal" is displayed.
2002 ECHO (RM884U)
Author : Date : 393
DI-224
DIAGNOSTICS - ANTI-LOCK BRAKE SYSTEM
In case of not using the TOYOTA hand-held tester:
PREPARATION:
ON Disconnect ABS ECU connector.
3
CHECK:
1 (a) Turn the ignition switch ON.
(+) (b) Measure voltage between terminals 3 and 1, 23 of ABS
ECU harness side connector.
OK:
(-)
23 Voltage: 10 - 14 V
F08558
OK Check or replace ABS actuator assembly.
NG
4 Check continuity between terminals GND (1, 23) of ABS ECU connector and
body ground.
CHECK:
LOCK Measure resistance between terminals 1 and 23 of ABS ECU
1 harness side connector and body ground.
OK:
(+) Resistance: 1 or less
(-)
23
F08559
NG Repair or replace harness or connector.
OK
Check for open circuit in harness and connector between ABS ECU and ECU-IG fuse
(See page IN-29 ).
2002 ECHO (RM884U)
Author : Date : 394
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo