Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di rs cib01085

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download cib01085 documenatation <<

Text preview - extract from the document

DI-281
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI1B9-27

DTC B0108/52 Short in P Squib Circuit (to B+)

CIRCUIT DESCRIPTION
The P squib circuit consists of the airbag sensor assembly and front passenger airbag assembly.
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0108/52 is recorded when a B+ short is detected in the P squib circuit.
DTC No. DTC Detecting Condition Trouble Area
S Short circuit in P squib wire harness (to B+) S Front passenger airbag assembly (P squib)
B0108/52 S P squib malfunction S Airbag sensor assembly
S Airbag sensor assembly malfunction S Wire harness

WIRING DIAGRAM
See page DI-271 .

INSPECTION PROCEDURE

1 Prepare for inspection (See step 1 on page DI-390 ).

2 Check P squib circuit.

CHECK:
(a) Turn the ignition switch to ON.
(b) For the connector (on the front passenger airbag assem-
Airbag bly side) between the front passenger airbag assembly
Sensor
Assembly and the airbag sensor assembly, measure the voltage be-
P Squib
tween the P+ and body ground.
OK:
ON Voltage: 0 V

P+

(-) (+)
H01022
AB0119 NG Repair or replace harness or connector be-
H02146 H04524 tween front passenger airbag assembly and air-
bag sensor assembly.

2002 ECHO (RM884U)

Author : Date : 451
DI-282
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM

3 Check airbag sensor assembly.

PREPARATION:
P Squib (a) Connect the connector to the airbag sensor assembly.
Airbag (b) Using a service wire, connect P+ and P- of the connector
Sensor (on the front passenger airbag assembly side) between
Assembly
the front passenger airbag assembly and the airbag sen-
sor assembly.

(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
ON
CHECK:
P- P+
(a) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(b) Clear DTC stored in memory (See step 5 on page
DTC B0108/52 DI-239 ).
DLC3
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se-
CG Tc conds.
H01023
(e) Check DTC (See page DI-239 ).
H02144 AB0118
H10600 H01076 H10617 OK:
DTC B0108/52 is not output.
HINT:
Codes other than code B0108/52 may be output at this time, but
they are not relevant to this check.

NG Replace airbag sensor assembly.

2002 ECHO (RM884U)

Author : Date : 452
DI-283
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM

4 Check P squib.

PREPARATION:
(a) Turn the ignition switch to LOCK.
P Squib (b) Disconnect negative (-) terminal cable from the battery,
Airbag
Sensor and wait at least for 90 seconds.
Assembly (c) Connect the front passenger airbag assembly connector.

(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
ON (a) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
(b) Clear DTC stored in memory (See step 5 on page
DI-239 ).
DLC3 DTC B0108/52 (c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
CG Tc (e) Check DTC (See page DI-239 ).
H01024
OK:
AB0119
H10600 H01076 H10618 DTC B0108/52 is not output.
HINT:
Codes other than code B0108/52 may be output at this time, but
they are not relevant to this check.

NG Replace front passenger airbag assembly.

From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check. If the malfunctioning part can not be
detected by the simulation method, replace all SRS components including the wire harness.

2002 ECHO (RM884U)

Author : Date : 453

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo