Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di rs cib01174

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
cib01174


>> Download cib01174 documenatation <<

Text preview - extract from the document
DI-304
                                                   DIAGNOSTICS        -   SUPPLEMENTAL RESTRAINT SYSTEM
                                                                                                                      DI1NI-15




  DTC                 B0117/45                          Short in Side Squib (LH) Circuit
                                                        (to Ground)

CIRCUIT DESCRIPTION
The side squib (LH) circuit consists of the airbag sensor assembly and side airbag assembly (LH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0117/45 is recorded when a ground short is detected in the side squib (LH) circuit.
     DTC No.                       DTC Detecting Condition                                            Trouble Area
                 S Short circuit in side squib (LH) wire harness (to ground)   S Side airbag assembly (LH)
    B0117/45     S Side squib (LH) malfunction                                 S Airbag sensor assembly
                 S Airbag sensor assembly malfunction                          S Wire harness


WIRING DIAGRAM
See page DI-297 .

INSPECTION PROCEDURE

    1     Prepare for inspection (See step 1 on page DI-390 ).




    2     Check side squib (LH) circuit.

                                                         CHECK:
   Squib (LH)                                            For the connector (on the side airbag assembly side) between
                             Airbag                      the side airbag assembly (LH) and the airbag sensor assembly,
                             Sensor                      measure the resistance between SFL+ and body ground.
                             Assembly                    OK:
                                                               Resistance: 1 M or Higher



                                           SFL+


                                                             NG           Repair or replace harness or connector be-
           (-)     (+)                                                    tween side airbag assembly (LH) and airbag
 H01016
 H02118                                        H02128
                                                                          sensor assembly.


   OK




2002 ECHO (RM884U)

                                                                                 Author :                    Date :     474
                                                                                                       DI-305
                                            DIAGNOSTICS   -   SUPPLEMENTAL RESTRAINT SYSTEM



   3      Check airbag sensor assembly.

 Squib (LH)                                     PREPARATION:
                                                (a) Connect the connector to the airbag sensor assembly.
                            Airbag              (b) Using a service wire, connect SFL+ and SFL- of the con-
                            Sensor
                            Assembly
                                                      nector (on the side airbag assembly side) between the
                                                      side airbag assembly (LH) and the airbag sensor assem-
                                                      bly.
                                                (c) Connect the negative (-) terminal cable to the battery,
                                 ON                   and wait at least for 2 seconds.
SFL-                 SFL+                       CHECK:
                                                (a) Turn the ignition switch to ON and wait at least for 20 se-
                                                      conds.
                                                (b) Clear the DTC stored in memory (See step 5 on page
                                                      DI-239 ).
       DLC3                  DTC B0117/45
                                                (c) Turn the ignition switch to LOCK, and wait at least for 20
                                                      seconds.
                                                (d) Turn the ignition switch to ON and wait at least for 20 se-
    CG          Tc
                                                      conds.
H01017
                                                (e) Check the DTC (See page DI-239 ).
W03860 AB0119                                   OK:
H10600 H01071                          H12856

                                                      DTC B0117/45 is not output.
                                                HINT:
                                                Codes other than code B0117/45 may be output at this time, but
                                                they are not relevant to this check.

                                                   NG         Replace airbag sensor assembly.


  OK




2002 ECHO (RM884U)

                                                                    Author :           Date :            475
DI-306
                                             DIAGNOSTICS   -   SUPPLEMENTAL RESTRAINT SYSTEM



    4        Check side squib (LH).

 Squib (LH)
                                                 PREPARATION:
                                                 (a) Turn the ignition switch to LOCK.
                           Airbag                (b) Disconnect the negative (-) terminal cable from the bat-
                           Sensor                      tery, and wait at least for 90 seconds.
                           Assembly
                                                 (c) Connect the side airbag assembly (LH) connector.
                                                 (d) Connect the negative (-) terminal cable to the battery,
                                                       and wait at least for 2 seconds.
                      ON                         CHECK:
                                                 (a) Turn the ignition switch to ON and wait at least for 20 se-
                                                       conds.
                                                 (b) Clear the DTC stored in memory (See step 5 on page
                                                       DI-239 ).
         DLC3                 DTC B0117/45       (c) Turn the ignition switch to LOCK, and wait at least for 20
                                                       seconds.
                                                 (d) Turn the ignition switch to ON and wait at least for 20 se-
                                                       conds.
        CG       Tc                              (e) Check the DTC (See page DI-239 ).
 H01018
                                                 OK:
 AB0118 AB0119
 H10600 H01071                          H12857         DTC B0117/45 is not output.
                                                 HINT:
                                                 Codes other than code B0117/45 may be output at this time, but
                                                 they are not relevant to this check.

                                                   NG          Replace side airbag assembly (LH).


   OK



  From the results of the above inspection, the malfunctioning part can now be considered normal.
  To make sure of this, use the simulation method to check. If the malfunctioning part can not be
  detected by the simulation method, replace all SRS components including the wire harness.




2002 ECHO (RM884U)

                                                                     Author :            Date :            476



◦ Jabse Service Manual Search 2020 ◦ Jabse Pravopis ◦ Other service manual resources online : FixyaeServiceinfo