Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di rs cib01306
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01306 documenatation <<Text preview - extract from the documentDI-310
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI16S-45
DTC B0130/63 Short in P/T Squib (RH) Circuit
CIRCUIT DESCRIPTION
The P/T squib (RH) circuit consists of the airbag sensor assembly and seat belt pretensioner (RH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0130/63 is recorded when a short is detected in the P/T squib (RH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Short circuit between PR+ wire harness and PR- wire
S Seat belt pretensioner (RH)
harness of squib
B0130/63 S Airbag sensor assembly
S P/T squib (RH) malfunction
S Wire harness
S Airbag sensor assembly malfunction
WIRING DIAGRAM
Airbag Sensor Assembly
P15
P/T Squib (RH)
5
1 Y-B
C5 PR+
2 6
Y
C5 PR-
H01454
2002 ECHO (RM884U)
Author : Date : 480
DI-31 1
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI-390 )
2 Check P/T squib (RH) circuit.
PREPARATION:
Release the airbag activation prevention mechanism of the
Airbag
P/T Squib (RH) Sensor connector (on the airbag sensor assembly side) between the
Assembly airbag sensor assembly and the seat belt pretensioner (RH).
(See page DI-239 )
CHECK:
For the connector (on the seat belt pretensioner side) between
PR+ PR-
the seat belt pretensioner (RH) and the airbag sensor assem-
bly, measure the resistance between PR+ and PR-.
OK:
Resistance: 1 M or Higher
(+) (-)
H01019 H02203
H02141
NG Repair or replace harness or connector be-
tween seat belt pretensioner (RH) and airbag
sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 481
DI-312
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
Airbag (b) Connect negative (-) terminal cable to the battery, and
P/T Squib (RH) Sensor
wait at least for 2 seconds.
Assembly
CHECK:
(a) Turn the ignition switch to ON and wait at least for 20 se-
conds.
ON (b) Clear DTC stored in memory. (See page DI-239 )
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
DLC3 DTC B0130/63 (e) Check DTC. (See page DI-239 )
OK:
DTC B0130/63 is not output.
HINT:
CG Tc Codes other than code B0130/63 may be output at this time, but
H01020
they are not relevant to this check.
AB0119
H10600 H01082 H10619
NG Replace airbag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 482
DI-313
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check P/T squib (RH).
PREPARATION:
(a) Turn the ignition switch to LOCK.
Airbag (b) Disconnect negative (-) terminal cable from the battery,
P/T Squib (RH) Sensor
Assembly and wait at least for 90 seconds.
(c) Connect the seat belt pretensioner (RH) connector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
ON
CHECK:
(a) Turn the ignition switch to LOOK, and wait at least for 20
second.
(b) Turn the ignition switch to ON, and wait at least for 20 se-
DLC3 DTC B0130/63 conds.
(c) Clear DTC stored in memory. (See page DI-239 )
(d) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
CG Tc
(e) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
H01021
(f) Check DTC. (See page DI-239 )
AB0119
H10600 H01082 H10620 OK:
DTC B0130/63 is not output.
HINT:
Codes other than code B0130/63 may be output at this time, but
they are not relevant to this check.
NG Replace seat belt pretensioner (RH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2002 ECHO (RM884U)
Author : Date : 483
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo