Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm di rs cib01316
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download cib01316 documenatation <<Text preview - extract from the documentDI-314
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
DI1BG-26
DTC B0131/64 Open in P/T Squib (RH) Circuit
CIRCUIT DESCRIPTION
The P/T squib circuit (RH) consists of the airbag sensor assembly and seat belt pretensioner (RH).
It causes the SRS to deploy when the SRS deployment conditions are satisfied.
For details of the function of each component, see OPERATION on page RS-2 .
DTC B0131/64 is recorded when an open is detected in the P/T squib (RH) circuit.
DTC No. DTC Detecting Condition Trouble Area
S Open circuit in PR+ wire harness or PR- wire harness of
S Seat belt pretensioner (RH)
squib
B0131/64 S Airbag sensor assembly
S P/T squib (RH) malfunction
S Wire harness
S Airbag sensor assembly malfunction
WIRING DIAGRAM
See page DI-310 .
INSPECTION PROCEDURE
1 Prepare for inspection. (See step 1 on page DI-390 )
2 Check P/T squib (RH) circuit.
CHECK:
For the connector (on the seat belt pretensioner side) between
Airbag
the seat belt pretensioner (RH) and the airbag sensor assem-
P/T Squib (RH) Sensor
Assembly bly, measure the resistance between PR+ and PR-.
OK:
Resistance: Below 1
PR+ PR-
(+) (-)
H01019
H02141 H02205 NG Repair or replace harness or connector be-
tween seat belt pretensioner (RH) and airbag
sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 484
DI-315
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
3 Check airbag sensor assembly.
PREPARATION:
(a) Connect the connector to the airbag sensor assembly.
Airbag (b) Using a service wire, connect PR+ and PR- of the con-
P/T Squib (RH) Sensor nector (on the seat belt pretensioner side) between the
Assembly
seat belt pretensioner (RH) and the airbag sensor assem-
bly.
(c) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
PR+ PR-
ON CHECK:
(a) Turn the ignition switch to ON and wait at least for 20 se-
conds.
(b) Clear DTC stored in memory. (See page DI-239 )
(c) Turn the ignition switch to LOCK, and wait at least for 20
DLC3 DTC B0131/64 seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
(e) Check DTC. (See page DI-239 )
CG Tc
H01020
OK:
H02139 AB0119
H10600 H01083 H10621 DTC B0131/64 is not output.
HINT:
Codes other than code B0131/64 may be output at this time, but
they are not relevant to this check.
NG Replace airbag sensor assembly.
OK
2002 ECHO (RM884U)
Author : Date : 485
DI-316
DIAGNOSTICS - SUPPLEMENTAL RESTRAINT SYSTEM
4 Check P/T squib (RH).
PREPARATION:
(a) Turn the ignition switch to LOCK.
(b) Disconnect negative (-) terminal cable from the battery,
Airbag
Sensor
and wait at least for 90 seconds.
P/T Squib (RH)
Assembly (c) Connect the seat belt pretensioner (RH) connector.
(d) Connect negative (-) terminal cable to the battery, and
wait at least for 2 seconds.
CHECK:
ON (a) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
(b) Clear DTC stored in memory. (See page DI-239 )
(c) Turn the ignition switch to LOCK, and wait at least for 20
DLC3 DTC B0131/64 seconds.
(d) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
(e) Check DTC. (See page DI-239 )
OK:
CG Tc
H01021
DTC B0131/64 is not output.
AB0119
H10600 H01083 H10622 HINT:
Codes other than code B0131/64 may be output at this time, but
they are not relevant to this check.
NG Replace seat belt pretensioner (RH).
OK
From the results of the above inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.
2002 ECHO (RM884U)
Author : Date : 486
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo