Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm em cylblo repl

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download repl documenatation <<

Text preview - extract from the document
                        ENGINE MECHANICAL      -   CYLINDER BLOCK

                                      1.    REPLACE CONNECTING ROD BUSHINGS
                                      (a)   Using SST and a press, press out the bushing.
                                            SST 09222-30010


                                      (b)   Align the oil hoses of a new bushing and the connecting
                                      (c)   Using SST and a press, press in the bushing.
                                            SST 09222-30010
  Oil Hole


                                      (d)   Using a pin hole grinder, hone the bushing to obtain the
                                            standard specified clearance (See page EM-70 ) be-
                                            tween the bushing and piston pin.


                                      (e)   Check the piston pin fit at normal room temperature. Coat
                                            the piston pin with engine oil, and push it into the connect-
                                            ing rod with your thumb.


                                      2.     REPLACE CRANKSHAFT REAR OIL SEAL
                                      If rear oil seal is installed to cylinder block
                     Cut Position
                                      (a) Using a knife cut off the oil seal lip.
                                      (b) Using a screwdriver, pry out the oil seal.
                                      Be careful not to damage the crankshaft. Tape the screw-
                                      driver tip.


2002 ECHO (RM884U)

                                                         Author :              Date :                690
                       ENGINE MECHANICAL   -   CYLINDER BLOCK

                                   (c)   Apply MP grease to a new oil seal lip.
                 SST               (d)   Using SST and a hammer, tap in the oil seal until its sur-
                                         face is flush with the rear oil seal retainer edge.
                                         SST 09223-15030, 09950-70010 (09951-07100)


2002 ECHO (RM884U)

                                                     Author :            Date :              691

◦ Jabse Service Manual Search 2021 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo