Service Manuals, User Guides, Schematic Diagrams or docs for : . Car Manuals Toyota Echo 2000-2002 Approved techinfo.toyota.com ileaf 02toyrm 02toypdf 02rmsour 2002 02echorm em cylhea inst

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download inst documenatation <<

Text preview - extract from the document

EM-44
                               ENGINE MECHANICAL       -   CYLINDER HEAD
                                                                                                             EM16N-01


                                            INSTALLATION
                                            HINT:
                                             S      Thoroughly clean all parts to be assembled.
                                             S      Before installing the parts, apply fresh engine oil to all slid-
                                                    ing and rotating surfaces.
                                             S      Replace all gaskets and oil seals with new ones.




                                            1.   PLACE CYLINDER HEAD ON CYLINDER BLOCK
              Lod No.
                                            (a)  Place a new cylinder head gasket on the cylinder block
                                                 surface with the Lod No. stamp upward.
                                            NOTICE:
                                            Be careful of the installation direction.
                                            (b) Place the cylinder head quietly in order not to damage the
                                                 gasket with the bottom part of the head.

                                   A11249



                                            2.    INSTALL CYLINDER HEAD BOLTS
                                            HINT:
         8   4         2   5   9             S    The cylinder head bolts are tightened in 2 progressive
                                                  steps (steps (b) and (d)).
                                             S    If any cylinder head bolt is broken or deformed, replace
                                                  it.
        10   6         1   3   7            (a) Apply a light coat if engine oil on the threads and under
                                                  the heads of the cylinder head bolts.
                                   A11228   (b) Using a 8 mm bi-hexagon wrench, install and uniformly
                                                  tighten the 10 cylinder head bolts and plate washers, in
                                                  several passes, in the sequence shown.
                                                  Torque: 29.4 N

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo