Service Manuals, User Guides, Schematic Diagrams or docs for : . Various CHINA TV LCD lc_42fe27_682
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download lc_42fe27_682 documenatation <<
Text preview - extract from the document
LCD TELEVISION
LC-47FE27
CONTENTS
Safety precautions...................................................................................... 1
Alignment instructions ................................................................................ 3
Working principle analysis of the unit...............................................................7
Block diagram .............................................................................................9
IC block diagram.........................................................................................10
Wiring diagram ........................................................................................ 17
Troubleshooting......................................................................................... 19
Schematic diagram.................................................................................... 29
APPENDIX-A: Assembly list
APPENDIX-B: Exploded View
Attention: This service manual is only for service personnel to take reference with. Before
servicing please read the following points carefully.
Safety precautions
1. Instructions
Be sure to switch off the power supply before replacing or welding any components or
inserting/plugging in connection wire Anti static measures to be taken (throughout the entire
production process!):
a) Do not touch here and there by hand at will;
b) Be sure to use anti static electric iron;
c) It's a must for the welder to wear anti static gloves.
Please refer to the detailed list before replacing components that have special safety requirements.
Do not change the specs and type at will.
2. Points for attention in servicing of LCD
2.1 Screens are different from one model to another and therefore not interchangeable. Be sure to
use the screen of the original model for replacement.
2.2 The operation voltage of LCD screen is 700-825V. Be sure to take proper measures in
protecting yourself and the machine when testing the system in the course of normal operation or
right after the power is switched off. Please do not touch the circuit or the metal part of the module
that is in operation mode. Relevant operation is possible only one minute after the power is
switched off.
2.3 Do not use any adapter that is not identical with the TV set. Otherwise it will cause fire or
damage to the set.
2.4 Never operate the set or do any installation work in bad environment such as wet bathroom,
laundry, kitchen, or nearby fire source, heating equipment and devices or exposure to sunlight etc.
Otherwise bad effect will result.
2.5 If any foreign substance such as water, liquid, metal slices or other matters happens to fall into
the module, be sure to cut the power off immediately and do not move anything on the module lest it
should cause fire or electric shock due to contact with the high voltage or short circuit.
2.6 Should there be smoke, abnormal smell or sound from the module, please shut the power off at
once. Likewise, if the screen is not working after the power is on or in the course of operation, the
power must be cut off immediately and no more operation is allowed under the same condition.
2.7 Do not pull out or plug in the connection wire when the module is in operation or just after the
power is off because in this case relatively high voltage still remains in the capacitor of the driving
circuit. Please wait at least one minute before the pulling out or plugging in the connection wire.
2.8 When operating or installing LCD please don't subject the LCD components to bending, twisting
or extrusion, collision lest mishap should result.
2.9 As most of the circuitry in LCD TV set is composed of CMOS integrated circuits, it's necessary
to pay attention to anti statics. Before servicing LCD TV make sure to take anti static measure and
ensure full grounding for all the parts that have to be grounded.
2.10 There are lots of connection wires between parts behind the LCD screen. When servicing or
moving the set please take care not to touch or scratch them. Once they are damaged the screen
1
would be unable to work and no way to get it repaired.
If the connection wires, connectors or components fixed by the thermotropic glue need to disengage
when service, please soak the thermotropic glue into the alcohol and then pull them out in case of
damage.
2.11 Special care must be taken in transporting or handling it. Exquisite shock vibration may lead to
breakage of screen glass or damage to driving circuit. Therefore it must be packed in a strong case
before the transportation or handling.
2.12 For the storage make sure to put it in a place where the environment can be controlled so as to
prevent the temperature and humidity from exceeding the limits as specified in the manual. For
prolonged storage, it is necessary to house it in an anti-moisture bag and put them altogether in one
place. The ambient conditions are tabulated as follows:
Temperature Scope for operation 0 ~ +50 oC
Scope for storage -20 ~ +60 oC
Humidity Scope for operation 20% ~ 85%
Scope for storage 10% ~ 90%
2.13 Display of a fixed picture for a long time may result in appearance of picture residue on the
screen, as commonly called "ghost shadow". The extent of the residual picture varies with the
maker of LCD screen. This phenomenon doesn't represent failure. This "ghost shadow" may remain
in the picture for a period of time (several minutes). But when operating it please avoid displaying
still picture in high brightness for a long time.
3. Points for attention during installation
3.1 The front panel of LCD screen is of glass. When installing it please make sure to put it in place.
3.2 For service or installation it's necessary to use specified screw lest it should damage the screen.
3.3 Be sure to take anti dust measures. Any foreign substance that happens to fall down between
the screen and the glass will affect the receiving and viewing effect
3.4 When dismantling or mounting the protective partition plate that is used for anti vibration and
insulation please take care to keep it in intactness so as to avoid hidden trouble.
3.5 Be sure to protect the cabinet from damage or scratch during service, dismantling or mounting.
2
Alignment instructions
1. Test equipment
Digital Multi-meter
54200 (Signal generator)
PC (FLASH writing programs have to be installed first, W24CXX.EXE)
VG849 (HDMI signal generator)
CA210 (White balancer)
DVD player (with HDMI output)
Monitor
2. The alignment flow chart (see below figure)
FLASH write N5, N9, N13, N24
Check accessories and then packing
Production of main board, high frequency board,
other little board, power board on the line.
Input VGA signal, check if display is normal in
the state of PC and various functions (analog
control), line/ field center etc. the picture and
High frequency board test
sound of AV-OUT should be the picture and
sound of the current channel
Main board test
Input HDMI and DVI signal (use a connection
wire, input audio signal from D-sub Audio in),
Test of Button board and IR board check if HDCP KEY, picture and sound are
normal. the picture and sound of AV-OUT should
be the picture and sound of the current channel
Combined test for general assembly
Input YPbPr/YCbCr 1/2 signal and check if
Aging
picture, sound and analog quantity control is
normal in the state of COMPONENT. the picture
and sound of AV-OUT should be the picture and
ADC emendation and white balance adjustment
sound of the current channel
Connect to central signal source, check Input AV1/S/AV2 signal, check various functions
various TV functions (station search, system under each terminal (system identify, analog
identify, modulate quantity control etc), check if control etc), check if Picture and sound of AV-out
the output of earphone and speaker are normal is normal. (S-terminal and AV1 share the same
Picture and sound of AV-out is normal. (check audio channel, the output picture from AV-out is
stereo/SAP and CCD, VCHIP for America) . the picture of AV1 in the status of S-terminal)
Fig.1 Flow process of alignment
3
3. Flash writing programs
Flash write N5, N9, N13, N24
Flash write W24CXX.EXE to N13, N24 with self-made flash write tool on the line.
Note: software upgrade of N5 from socket X51
software upgrade of N9 from USB interface
software upgrade of N13, N24 from HDMI and VGA interface separately
Adjustment of main board and high frequency board
a) Connect the main board and high frequency board according the wiring diagram. Connect X402
(on main board) with IR board and insert the plug of power supply assy into X707, now the
indicator light of IR board is red.
b) Press POWER button on the remote control set, now the indicator light of IR board is blue.
c) Check if picture and sound are normal of all the channels, if STEREO/SAP can be identified
correctly. Check AV-OUT function: the picture and sound of AV-OUT should be the picture and
sound of the current channel at TV/AV1/S/AV2; the sound from AV-OUT should be the sound of
the current channel at the other signal source, while the picture don't need to check.
4. Unit adjustment
4.1 Adjustment of unit connection
Turn on the TV and check if it is normal: display LOGO about 8 seconds later, display picture about
12 seconds later.
4.2 Aging
a) Turn on the TV, select TV channel without signal input.
b) Aging for an hour in the aging room.
4.3 ACD calibration and White balance adjustment (use CA210, VG849 generator)
Method of entering factory menu: enter "INPUT" menu, then press"2 5 8 0" one by one.
Note: Coordinate of cold color temperature 9300K is (X=283, Y=299), coordinate of warm color
temperature 6500K is (X=311, Y=329).
YPbPr channel (YPbPr1 or YPbPr2)
a) Input SMPTE COLOR BAR signal of 480P (TIMING:976, PATTERN:984)
b) Set brightness to 50; contrast to 50
c) Enter factory menu and perform "Calibration"
VGA channel
a) Input 16-level gray scale signal of the mode 800*600 @60 (TIMING:885, PATTERN:920)
b) Set brightness to 50; contrast to 50
c) Enter factory menu and perform "Calibration"
d) Select "color temperature" of "COOL"
e) Enter "color temperature setting" menu
f) Fix GREEN GAIN at 128, adjust RED GAIN, BLUE GAIN to set the color coordinates of
fourteenth level to (X=283, Y=299).
g) Set the color coordinates of warm color temperature (WARM) to (X=311, Y=329) using the
same method.
4
h) Check if the color coordinates of the cool/warm color temperature at YPbPr (include 480i,
480P, 720P, 1080i), VIDEO(NTSC, PAL) and TV channels are within the scope of the
corresponding value (permit ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo