Service Manuals, User Guides, Schematic Diagrams or docs for : . Various CHINA TV TV Div Service Mode`s chinese TV`s china_akira_ct14fe_ch_8803__with_tmp8803cpan-3gv1_2sc4429_la4267_la78040__-_adj_326

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download china_akira_ct14fe_ch_8803__with_tmp8803cpan-3gv1_2sc4429_la4267_la78040__-_adj_326 documenatation <<

Text preview - extract from the document

                                                                                                    7




CIRCUIT ADJUSTMENTS
GENERAL INFORMATIONS
All adjustment are thoroughly checked and corrected when the receiver leaves the factory. Therefore
the receiver should operate normally and produce proper color and B/W pictures upon installation.
However, several minor adjustments may be required depending on the particular location in which the
receiver is operated.

This receiver is shipped completely in carton. Carefully draw out the receiver from the carton and
remove all packing materials. Power cord into a convenient 220 volts 50 Hz AC two pin power outlet.
Turn the receiver ON. Check and adjust all the customer controls such as BRIGHTNESS, CONTRAST
and COLOUR Controls to obtain natural color or B/W picture.


AUTOMATIC DEGAUSSING
A degaussing coil is mounted around the picture tube so that external degaussing after moving the
receiver is normally unnecessary, providing the receiver is properly degaussed upon installation. The
degaussing coil operates for about 1 second after the power to the receiver is switched ON. If the set is
moved or faced in a different direction, the power switch must be switched off at least 30 minutes in
order that the automatic degaussing circuit operates properly. Should the chassis or parts of the cabinet
become magnetized to cause poor color purity, use an external-degaussing coil. Slowly move the
degaussing coil around the faceplate of the picture tube, the side and front of the receiver and slowly
withdraw the coil to a distance of about 2m before disconnecting it from AC source. If color shading
still persists, perform the COLOUR PURITY ADJUSTMENT and CONVERGENCE
ADJUSTMENTS procedures.


ADJUSTMENT MODE

                   B+ adjustment, TV signal receiving
 Item
                      AKTP01/02 chassis

 Measuring         TV SG (Signal Generator)
 Equipment         Digital multi-meter
 Preparation       The set is turned on
 Before Adj.       Connect the TV SG to RF input terminal of the set.




Model No: CT-14FES1
Version 1.0
                                                                                                    8




ADJUSTMENT PROCEDURE

1.   Turn RP551 potentiometer to adjust B+ to specified voltage.
2.   Check voltages for video out, vertical out, circuit work and audio power out as follow:-

                                           Voltage (volt)
                                                                      Tolerance
                                          14 inch     21 inch
               +B                            114            110          

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo