Service Manuals, User Guides, Schematic Diagrams or docs for : . Various LCD Panels Panel_ACER_L170E3_EC-7_0_[DS]
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
![Panel_ACER_L170E3_EC-7_0_[DS]](/pics/5c36ac673f67f.gif)
>> Download Panel_ACER_L170E3_EC-7_0_[DS] documenatation <<
Text preview - extract from the document
Global LCD Panel Exchange Center www.panelook.com
Product Specifications
17.0" SXGA Color TFT-LCD Module
Model Name: L170E3/M170EN04
EC: 7/ V.7
( ) Preliminary Specifications
() Final Specifications
Note: This Specification is subject to change without notice.
i Contents
(C) Copyright AU Optronics, Inc. 1/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
ii Record of Revision
1.0 Handling Precautions
2.0 General Description
2.1 Display Characteristics
2.2 Functional Block Diagram
2.3 Optical Characteristics
2.4 Pixel format image
3.0 Electrical characteristics
3.1 Absolute Maximum Ratings
3.2 Connectors
3.3 Signal Pin
3.4 Signal Description
3.5 Signal Electrical Characteristics
3.6 Interface Timing
3.6.1 Timing Characteristics
3.6.2 Timing Definition
3.7 Power Consumption
3.8 Power ON/OFF Sequence
4.0 Backlight Characteristics
4.1 Signal for Lamp connector
4.2 Parameter guide line for CCFL Inverter
5.0 Vibration, shock and drop
5.1 Vibration and shock
5.2 Drop test
6.0 Environment
6.1 Temperature and humidity
6.1.1 Operating conditions
6.1.2 Shipping conditions
6.2 Atmospheric pressure
6.3 Thermal shock
7.0 Reliability
7.1 Failure criteria
7.2 Failure rate
7.2.1 Usage
7.2.2 Components de-rating
7.3 CCFL life
7.4 ON/OFF cycle
8.0 Safety
8.1 Sharp edge requirement
8.2 Material
8.2.1 Toxicity
8.2.2 Flammability
8.3 Capacitors
8.4 Hazardous voltage
9.0 Other requirements
9.1 Smoke free design
9.2 National test lab requirement
10.0 Mechanical Characteristics
ii Record of Revision
(C) Copyright AU Optronics, Inc. 2/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Version and Date Page Old description New Description Remark
0.1. 2002/02/19 All First Edition for Customer All
0.2 2002/03/20 5 Functional block diagram Functional block diagram Update
1.0 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth when
handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the Interface
Connector of the TFT-LCD module.
10) After installation of the TFT-LCD module into an enclosure (LCD monitor housing, for example), do not
twist nor bend the TFT -LCD module even momentary. At designing the enclosure, it should be taken
into consideration that no bending/twisting forces are applied to the TFT -LCD module from outside.
Otherwise the TFT -LCD module may be damaged.
(C) Copyright AU Optronics, Inc. 3/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2.0 General Description
This specification applies to the 17.0 inch Color TFT-LCD Module L170E3
The display supports the SXGA (1280(H) x 1024(V)) screen format and 16.7M colors (RGB 8-bits data).
All input signals are 2 Channel LVDS interface compatible.
This module does not contain an inverter card for backlight.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 432(17.0")
Active Area [mm] 337.920 (H) x 270.336(V)
Pixels H x V 1280(x3) x 1024
Pixel Pitch [mm] 0.264 (per one triad) x 0.264
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode Normally White
White Luminance [cd/m2] 250 (Typ)
Contrast Ratio 400 : 1 (Typ)
Optical Response Time [msec] 40 (Typ)
Nominal Input Voltage VDD [Volt] +5.0 V
Power Consumption [Watt] 25W(Max) (w/o Inverter, All black pattern)
(VDD line + CCFL line)
Weight [Grams] 2000 (Typ)
Physical Size [mm] 383.5(W) x 306(H) x 20.0(D) (Typ)
Electrical Interface Even/Odd R/G/B data(8bits),3 sync signal,
Clock
Support Color 16.7M colors ( RGB 8-bit data )
Temperature Range
Operating [oC] 0 to +50
Storage (Shipping) [oC] -20 to +60
(C) Copyright AU Optronics, Inc. 4/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2.2 Functional Block Diagram
The following diagram shows the functional block of the 17.0 inches Color TFT-LCD Module:
JAE FI-X30S-HF JST BHR-04VS-1
Mating Type JAE FI-X30S-H Mating Type SM04(4.0)B-BHS-1-TB
2.3 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature):
Item Unit Conditions Min. Typ. Max.
(C) Copyright AU Optronics, Inc. 5/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Viewing Angle [degree] Horizontal (Right) 60/60 70/70 -
[degree] CR = 10 (Left) - -
[degree] Vertical (Up) 50 60 -
[degree] CR = 10 (Down) 55 65 -
Contrast ratio 250 400 -
Normal Direction
Response Time(Note 1) [msec] Raising Time - 25 35-
[msec] Falling Time - 15 25-
[msec] Raising + Falling - 40 -
Color / Chromaticity Red x 0.59 0.62 0.65
Coordinates (CIE) Red y 0.3 0.33 0.36
Green x 0.27 0.30 0.33
Green y 0.57 0.60 0.63
Blue x 0.12 0.15 0.18
Blue y 0.07 0.10 0.13
Color Coordinates (CIE) White White x 0.28 0.31 0.34
White y 0.3 0.33 0.36
Luminance Uniformity (Note 2) [%] 80 85 -
White Luminance at [cd/m2] 200 250 -
CCFL 6.0mA(center point)
Crosstalk ( in 75Hz) [%] 1.5
Note 1: Definition of Response time:
The output signals of photodetector are measured when the input signals are changed from " Black" to
" White" (falling time), and from "White" to " Black" (rising time), respectively. The response time interval between
the 10% and 90% of amplitudes. Refer to figure as below.
TrR TrD
100
90
10
0
(C) Copyright AU Optronics, Inc. 6/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note 2 Measure points & Diagram
Display Length distance
x = ----------------------------
10
Display Width distance
y = ----------------------------
10
Minimum Luminance in 5 Points (1-5)
Uniformity = --------------------------------------
Maximum Luminance in 5 Points (1-5)
This panel is compatible with TCO99 approbation in luminance uniformity <1.7, luminance contrast >0.5
LCD Display area = 337.9 x 270.4 mm
W/10 1 2 W/10
5
3 4
W/10 W/10
L/10 L/10
(C) Copyright AU Optronics, Inc. 7/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2.4 Pixel format image
Following figure shows the relationship of the input signals and LCD pixel format.
1 2 1279 1280
1st Line R G B R G B R GB R G B
1024th R G B R G B R GB R G B
(C) Copyright AU Optronics, Inc. 8/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.0 Electrical characteristics
3.1 Absolute Maximum Ratings
Absolute maximum ratings of the module is as following:
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage VIN -0.3 +5.5 [Volt]
Select LVDS data order SELLVDS NC NC [Volt]
CCFL Inrush current ICFLL - 38 [mA] Note 1
CCFL Current ICFL - 7.6 [mA] rms
Operating Temperature TOP 0 +50 [oC] Note 2
Operating Humidity HOP 8 95 [%RH] Note 2
o
Storage Temperature TST -20 +60 [ C] Note 2
Storage Humidity HST 8 95 [%RH] Note 2
Note 1 : Duration=50 msec.
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
3.2 Connectors
Physical interface is described as for the connector on module.
These connectors are capable of accommodating the following signals and will be following components.
Connector Name / Designation Interface Connector / Interface card
Manufacturer JAE or compatible
Type Part Number FI-X30S-HF
Mating Housing Part Number FI-X30S-H
Connector Name / Designation Lamp Connector / Backlight lamp
Manufacturer JST
Type Part Number BHR-04VS-1
Mating Type Part Number SM04(4.0)B-BHS-1-TB
(C) Copyright AU Optronics, Inc. 9/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.3 Signal Pin
Pin# Signal Name Pin# Signal Name
1 RxO0- 2 RxO0+
3 RxO1- 4 RxO1+
5 RxO2- 6 RxO2+
7 GND 8 RxOC-
9 RxOC+ 10 RxO3-
11 RxO3+ 12 RxE0-
13 RxE0+ 14 GND
15 RxE1- 16 RxE1+
17 GND 18 RxE2-
19 RxE2+ 20 RxEC-
21 RxEC+ 22 RxE3-
23 RxE3+ 24 GND
25 NC 26 NC
27 NC 28 Power
29 Power 30 Power
(C) Copyright AU Optronics, Inc. 10/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.4 Signal Description
The module using a pair of LVDS receiver SN75LVDS82(Texas Instruments) or compatible. LVDS is a
differential signal technology for LCD interface and high speed data transfer device. Transmitter shall be
SN75LVDS83(negative edge sampling) or compatible. The first LVDS port(RxOxxx) transmits odd pixels
while the second LVDS port(RxExxx) transmits even pixels.
PIN # SIGNAL NAME DESCRIPTION
1 RxO0- Negative LVDS differential data input (Odd data)
2 RxO0+ Positive LVDS differential data input (Odd data)
3 RxO1- Negative LVDS differential data input (Odd data)
4 RxO1+
Positive LVDS differential data input (Odd data)
5 RxO2- Negative LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG)
6 RxO2+ Positive LVDS differential data input (Odd data, H-Sync,V-Sync,DSPTMG)
7 GND Power Ground
8 RxOC- Negative LVDS differential clock input (Odd clock)
9 RxOC+ Positive LVDS differential clock input (Odd clock)
10 RxO3- Negative LVDS differential data input (Odd data)
11 RxO3+ Positive LVDS differential data input (Odd data)
12 RxE0- Negative LVDS differential data input (Even clock)
13 RxE0+ Positive LVDS differential data input (Even data)
14 GND Power Ground
15 RxE1- Positive LVDS differential data input (Even data)
16 RxE1+ Negative LVDS differential data input (Even data)
17 GND Power Ground
18 RxE2- Negative LVDS differential data input (Even data)
19 RxE2+ Positive LVDS differential data input (Even data)
20 RxEC- Negative LVDS differential clock input (Even clock)
21 RxEC+ Positive LVDS differential clock input (Even clock)
22 RxE3- Negative LVDS differential data input (Even data)
23 RxE3+ Positive LVDS differential data input (Even data)
24 GND Power Ground
25 NC -
26 NC -
27 NC -
28 POWER Power
29 POWER Power
30 POWER Power
Note: Input signals of odd and even clock shall be the same timing.
LVDS DATA Name Description
DSP Display Timing :When the signal is high, the pixel data shall be valid to be displayed
V-S Vertical Sync :Both Positive and Negative polarity are acceptable
H-S Horizontal Sync :Both Positive and Negative polarity are acceptable
(C) Copyright AU Optronics, Inc. 11/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
TI LVDS X'mitter Module LVDS signal
SN75LVDS83 (interface connector pin7)
Signal Name Low(open)
D0 Red0
D1 Red1
D2 Red2
D3 Red3
D4 Red4
D5 Red7
D6 Red5
D7 Green0
D8 Green1
D9 Green2
D10 Green6
D11 Green7
D12 Green3
D13 Green4
D14 Green5
D15 Blue0
D16 Blue6
D17 Blue7
D18 Blue1
D19 Blue2
D20 Blue3
D21 Blue4
D22 Blue5
D23 NA
D24 H Sync
D25 V Sync
D26 Display Timing
D27 Red6
(C) Copyright AU Optronics, Inc. 12/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note: R/G/B data 7:MSB, R/G/B data 0:LSB
O = "First Pixel Data"
E = "Second Pixel Data"
(C) Copyright AU Optronics, Inc. 13/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
T
Input Clock
Input Data
Tsu Thd
3.5 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when Vin is off
It is recommended to refer the specifications of SN75LVDS82DGG(Texas Instruments) in detail.
Each signal characteristics are as follows;
Parameter Condition Min Max Unit
Differential Input [mV]
Vth High 100
Voltage(Vcm=+1.2V)
Differential Input Low [mV]
Vtl Voltage(Vcm=+1.2V) -100
3.6 Interface Timings
(C) Copyright AU Optronics, Inc. 14/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Basically, interface timings described here is not actual input timing of LCD module but output timing of
SN75LVDS82DGG (Texas Instruments) or equivalent.
3.6.1 Timing Characteristics
Signal Item Symbol MIN TYP MAX Unit
DTCLK Freq. Fdck 50 67.5 70 MHz
DTCLK Cycle Tck 14.2 14.8 20 ns
+V-Sync Frame Rate 1/Tv 56.25 75 77 Hz
+V-Sync Cycle Tv 13 13.33 17.78 ms
+V-Sync Cycle Tv 1035 1066 2047 lines
+V-Sync Active level Tva 3 3 lines
+V-Sync V-back porch Tvb 7 38 63 lines
+V-Sync V-front porch Tvf 1 1 lines
+DSPTMG V-Line m - 1024 - lines
+H-Sync Scan rate 1/Th - 80.06 - KHz
+H-Sync Cycle Th 800 844 1023 Tck
+H-Sync Active level Tha(*1) 4 56 Tck
+H-Sync Back porch Thb(*1) 4 124 Tck
+H-Sync Front porch Thf 4 24 Tck
+DSPTMG Display Pixels n - 640 - Tck
Note: Typical value is refer to VESA STANDARD , (*1) Tha+Thb should be less than 1024 Tck.
3.6.2 Timing Definition
1688dot
H-Sync
48dot 248dot
112dot
DSPTMG
1280dot
V-Sync
1H 38H
3H
DSPTMG
42H 1024H
(C) Copyright AU Optronics, Inc. 15/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.7 Power Consumption
Input power specifications are as follows;
Symbol Parameter Min Typ Max Units Condition
VDD Logic/LCD Drive 4.5 5 5.5 [Volt]
Voltage
IDD VDD current 850 1100 [mA]
IIDD Inrush VDD current 6.5 [A] t < 80us
PDD VDD Power 4.25 5.5 [Watt] Vin=5V ,All Black Pattern
VDDrp Allowable 100 [mV]
Logic/LCD Drive p-p
Ripple Voltage
VDDns Allowable 100 [mV]
Logic/LCD Drive p-p
Ripple Noise
3.8 Power ON/OFF Sequence
Vin power and lamp on/off sequence is as follows. Interface signals are also shown in the chart. Signals
from any system shall be Hi-Z state or low level when Vin is off.
10ms
min.
10% 90% 90%
Vin
10%
30 max, 1ms min. 10%
0 min. 0 min.
Signal
10% 10%
170ms
0 min.
min.
Lamp
10% 10%
On
4.0 Backlight Characteristics
(C) Copyright AU Optronics, Inc. 16/24
January, 2001 All Rights Reserved. L170E3-7 Ver0.2
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
4.1 Signal for Lamp connector
Pin # Signal Name
1 Lamp High Voltage
2
Lamp High Voltage
3
No Connection
4
Ground
4.2 Parameter guide line for CFL Inverter
Symbol Parameter Min Typ Max Units Condition
(L255) White Luminance 200 250 - [cd/m2 ] (Ta=25oC)
ISCFL CCFL standard current 5.5 6.0 6.5 [mA] (Ta=25oC)
rms
IRCFL CCFL operation range 3.0 6.0 7.0 [mA] (Ta=25oC)
rms
ICFL CCFL Inrush current - 26 34 [mA] Note 1
fCFL CCFL Frequency 40 50 80 [KHz] (Ta=25oC)
Note 2
ViCFL CCFL Ignition Voltage 1700 [Volt] (Ta=0oC)
(0oC) rms Note 4
ViCFL CCFL Ignition Voltage 1200 [Volt] (Ta=25oC)
(25oC) rms Note 4
VCFL CCFL Discharge Voltage 720 863 [Volt] (Ta=25oC)
(Reference) rms Note 3
PCFL CCFL Power consumption 17.3 19.0 [Watt] (Ta=25oC)
Note 3
Note 1: Duration=50 [msec]
Note 2: CCFL Frequency should be carefully determined to avoid interference between inverter and TFT LCD
Note 3: Calculator value for reference (ICFL◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo