Global LCD Panel Exchange Center www.panelook.com
Version : 7
Total pages : 16
Date : 2002.09.30
13.3" COLOR TFT-LCDMODULE SPECIFICATION
MODEL NAME: B133XN02 (UB133X01)
The content of this technical information
is subject to change without notice.
Please contact AU or its agent for further
information.
AU copyright 2000
All rights reserved,
Copying forbidden.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Record of Revision
Version Revise Date Page Content
Cover-
1 17/Jun./1999 page "Tentative" "Preliminary"
3 1. DF-19KR-20P-1H DF-19K-20P-1H
5 1. 30ms T2 70ms 0 T2 70ms
9 1. Lamp voltage:650Vrms(Typ.) 620 62Vrms
2. Lamp starting voltage:1100Vrms 1050Vrms(at 25 )
1500Vrms 1260Vrms(at 0 )
14 1. CN1 connector pin assignment.
1 CN1 20 20 CN1 1
2. T-type rib of back side be cancelled.
Cover-
2 20/Sep./1999 page "UP133X01" "UB133X01"
2 1. Weight: 490 10(Typ.) 500 10(Typ.)
2. Thickness:5.5(typ) 5.9(max)
4 1. Note1:80% 90%
5 1. ICC=(270mA)typ IA=(350mA)typ, IB=(550mA)max
8 1. tSU1, th1: 600ps 500ps
9 1. Lamp voltage: 620 62Vrms 610 61Vrms
2. Lamp starting voltage: 1050Vrms 925Vrms(at 25 )
1260Vrms 1530Vrms(at 0 )
10 1. White uniformity: 2.0max 1.8max
2. CIE color: adding the R,G,B CIE color spec
11 1. Thermal cycling:2hrs, 30mins, 2hrs 1H,10mins,1H
2. Vibration:10Hz~55Hz~10Hz 10Hz~500Hz~10Hz
13 Adding the packing form drawing
14 Update the mechanical drawing
3 30/Sep./1999 14~15 Update the mechanical drawing
4 07/Oct./1999 15 Update the mechanical drawing
5 10/Dec./1999 8 Correct the position ID to match the timing drawing
10 By : 0.110 0.03 0.120 0.03
14~15 Update the mechanical drawing
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6 07/Apr./2000 Cover S P E C N o : 2 3 3 - 2 2 0 - 0 6 3 413-212-030
5 30ms T1 70msec 0ms T1 70msec.
9 Lamp current: 3 ~ 6 ~ 6.5 mA 2 ~ 5 ~ 6.5 mA
13 EPP package introduced
7 30/Sep./2002 14 Updated Drawing
15 Updated Drawing
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 1/16
Contents:
A. Physical specification P2
B. Electrical specifications P3
1. Pin assignment P3
2. Absolute maximum ratings P4
3. Electrical characteristics P5
a. Typical operating conditions P5
b. Display color v.s. input data P6
signals
c. Input signal timing P7
d. Display position P8
e. Backlight driving conditions P9
C. Optical P10
specifications
D. Reliability test items P12
E. Display P12
quality
F. Handling precaution P12
G. Packing form P13
Appendix:
Fig.1-(a) LCM outline dimensions(Front side) P14
Fig.1-(b) LCM outline dimensions (Back side) P15
Fig.2 Timing chart P16
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 2/16
A. Physical specifications
NO. Item Specification Remark
1 Display resolution(pixel) 1024(H) 768(V)
2 Active area(mm) 270.3(H) 202.8(V)
3 Screen size(inch) 13.3(Diagonal)
4 Pixel pitch(mm) 0.264(H) 0.264(V)
5 Color configuration R. G. B. Vertical stripe
6 Overall dimension(mm) 284(W) 214.5(H) 5.9 max(D) Note 1
7 Weight(g) 500 10
8 Surface treatment Hard coating(3H), anti-glare of the front
polarizer(12%)
Note 1: Refer to Fig. 1.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 3/16
B. Electrical specifications
1.Pin assignment
(1).Input signal interface
CN1 (20P) connector : DF-19K-20P-1H(Hirose)
User's matching connector : DF19G-20S-1C(Wire type)
DF19-20S-1F(FPC type)
Pin no Symbol Function Etc.
1 VCC +3.3 V power supply
2 VCC +3.3 V power supply
3 GND Ground
4 GND Ground
5 RxIN0- LVDS receiver signal channel 0
6 RxIN0+
7 GND Ground
8 RxIN1- LVDS receiver signal channel 1
9 RxIN1+
10 GND Ground
11 RxIN2- LVDS receiver signal channel 2
12 RxIN2+
13 GND Ground
14 CKIN- LVDS receiver signal clock
15 CKIN+
16 GND Ground
17 NC No Connection
18 NC No Connection
19 GND Ground
20 GND Ground
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 4/16
(2) LVDS transmitter/receiver signal mapping
Symbol Function
TxIN0 R0 Red data (LSB)
TxIN1 R1 Red data
TxIN2 R2 Red data
6 bit red display data
TxIN3 R3 Red data
TxIN4 R4 Red data
TxIN5 R5 Red data (MSB)
TxIN6 G0 Green data (LSB)
TxIN7 G1 Green data
TxIN8 G2 Green data
6 bit green display data
TxIN9 G3 Green data
TxIN10 G4 Green data
TxIN11 G5 Green data (MSB)
TxIN12 B0 Blue data (LSB)
TxIN13 B1 Blue data
TxIN14 B2 Blue data
6 bits blue display data
TxIN15 B3 Blue data
TxIN16 B4 Blue data
TxIN17 B5 Blue data (MSB)
TxIN18 Hs Horizontal sync
TxIN19 Vs Vertical sync
TxIN20 DE Data enable
TxCLKIN CLK Clock Dot clock
2. Absolute maximum ratings (GND = 0 V)
Values Unit
Parameter Symbol Remark
Min. Max.
Power voltage VCC -0.3 4 VDC At 25
Input signal voltage VLH -0.3 VCC+0.3 VDC At 25
Operating temperature Top 0 +50 Note 1
Storage temperature TST -20 +60 Note 1
Note 1:The relative humidity must not exceed 90% non-condensing at temperatures of 40 or
less. At temperatures greater than 40 , the wet bulb temperature must not exceed 39
. When operate at low temperatures, the brightness of CCFL will drop and the life
time of CCFL will be reduced.
Note 2:The unit should not be exposed to corrosive chemicals.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 5/16
3. Electrical characteristics
a. Typical operating conditions
Item Symbol Min. Typ. Max. Unit Remark
Input voltage VCC 3.0 3.3 3.6 V
Power
supply Current IA - 350 -
Note 1
voltage consumption IB - - 550 mArms
Inrush current I RUSH - - 2200 mApeak Note 2
Internal Low voltage VIL 0 - 0.3 VCC
logic
High voltage VIH 0.7VCC - VCC
Power ripple voltage VRP - - 100 mVp-p
Note 1:Effective value (mArms) at VCC = 3.3 V/25 .
IA IB Black
(0)
64
Gray
(7)
64
White Black Vertical stripe line
64 Grayscale
Note 2: Refer to the following power-on condition.
90%
Vcc
10%
Ton=470 s
Sequence of Power-on/off and signal-on/off
T3 T4
Power 0ms T1 70msec
T1 T2 0 T2 70msec
T5 300msec T3
300msec T4
Input signal
Apply the lamp voltage within the LCD operating range. When the backlight turns on before
the LCD operation or the LCD turns off before the backlight turns off, the display may
momentaily become abnormal.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 6/16
Caution
The above on/off sequence should be applied to avoid abnormal function in the display.
In case of handling:
Make sure to turn off the power when you plug the cable into the input connector or pull the
cable out of the connector.
b. Display color v.s. input data signals
Data signal (0 : Low level, 1: High level)
Display colors
R5 R4 R3 R2 R1 R0 G5 G4 G3 G2 G1 G0 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Magenta 1 1 1 1 1 1 0 0 0 0 0 0 1 1 1 1 1 1
Basic
Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
colors
Cyan 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0
Dark 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Red
grayscale
bright
1 1 1 1 0 1 0 0 0 0 0 0 0 0 0 0 0 0
1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0
Red 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0
Dark 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0
Green
grayscale
bright
0 0 0 0 0 0 1 1 1 1 0 1 0 0 0 0 0 0
0 0 0 0 0 0 1 1 1 1 1 0 0 0 0 0 0 0
Green 0 0 0 0 0 0 1 1 1 1 1 1 0 0 0 0 0 0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
Dark 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0
Blue
grayscale
bright
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 0 1
0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 0
Blue 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1
Note : Each basic color can be displayed in 64 gray scales using the 6 bit data signals. By
combining the 18-bit data signals(R,G,B), the 262, 144 colors can be achieved on the
display.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 7/16
c. Input signal timing
Timing diagrams of input signal are shown in Fig 2.
(1). Timing characteristics of input signals
Item Symbol Min. Typ. Max. Unit Remark
Frequency Fck 50 65 66 MHz
CLK clock
Period Clk 20 15.4 15.2 ns
Period Th 1040 1344 1648 Clk
20 20.7 - s
Display period Thd 1024 Clk
Pulse width Thw 2 136 - Clk
Hs
Horizontal Display start The 296 296 296 Clk DE non-using
sync 8 296 600 Clk DE using
Front porch Thf 8 24 - Clk
Back porch Thb 4 160 - Clk
Blanking Thb1 16 320 624 Th
Phase shift Tvpd 2 320 - Clk
Period Tv 803 806 895 Th
- 16.6 20 ms
Vs
Display width Tvd 768 Th
Vertical
sync Pulse width Tvw 1 6 - Th
Display start Tve - 35 - Th DE non-using
Front porch Tvf 0 3 - Th
Blanking Tvb1 35 38 127 Th
Available data input timing
Horizontal DE non-using When DE signal is fixed Low, after falling edge of Hs, counting 296
clocks, then getting valid data from 297th clock's data.
DE using Valid data is according to rising edge of "DE" signal.
The time should be 8 to 600 clocks between falling edge of Hs and
rising edge of DE.
Vertical DE non-using After falling edge of Vs, counting 35 Th, then getting 36th Th's
data. (in DE non-using mode and DE using mode).
DE using Valid data is according to the first rising edge of "DE" signal after
DE keeps low during blanking period.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 8/16
(2). The timing condition of LVDS
Item Symbol Min. Typ. Max. Unit
The differential level VID 0.1 - 0.6 V
The common mode input voltage VIC VID - VID V
2.4
2 2
The input setup time tsu1 500 - - ps
The input hold time th1 500 - - ps
VID VID = VIAP - VIAM
VIAP VIAM
tsu1 th1
An
7 LCK
d.Display position
D( 1,1 ) D( 2,1 ) ...... D( X,1 ) ...... D( 1023,1 ) D( 1024,1 )
D( 1,2 ) D( 2,2 ) ...... D( X,2 ) ...... D( 1023,2 ) D( 1024,2 )
.
. .
. .
. .
.
. ...... . ...... . .
D( 1,Y ) D( 2,Y ) ...... D( X,Y ) ...... D( 1023,Y ) D( 1024,Y )
.
. .
. .
. .
.
. ...... . ...... . .
D( 1,767 ) D( 2,767 ) ...... D( X,767 ) ...... D( 1023,767) D( 1024,767
D( 1,768 ) D( 2,768 ) ...... D( X,768 ) ...... D( 1023,768 D( 1024,768
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 9/16
e.Backlight driving conditions
Parameter Symbol Min. Typ. Max. Unit Remark
Lamp voltage VL 549 610 671 Vrms IL = 6mA.
Lamp current IL 2 5 6.5 mArms Note 1
Power consumption PL 3.66 W Note 2
- - 1530 T=0
Lamp starting voltage VS Vrms
- - 925 T=25
Frequency FL 50 60 80 KHZ Note 3
Lamp life time LL 10000 - - Hr Note 4
Note 1: Using the inverter of PWM type(keep stable peak value of output voltage during
adjusting lamp current), the minimum lamp current is 2mA.
Note 2: Inverter should be designed with the characteristic of lamp. When you are designing
the inverter, the output voltage of the inverter should comply with the following
conditions.
(1).The area under the positive and negative cycles of the waveform of the lamp
current and lamp voltage should be area symmetric(the symmetric ratio should be
larger than 90%).
(2).There should not have any spikes in the waveform.
(3).The waveform should be sine wave as possible.
(4).Lamp current should not exceed the maximum value within the operating
temperature (It is prohibited to over the maximum lamp current even if operated in
the non-guaranteed temperature). When lamp current over the maximum value for
a long time, it may cause fire. Therefore, it is recommend that the inverter should
have the current limiter circuit.
Note 3: Lamp frequency may produce interference with horizontal synchronous frequency
and
this may cause line flow on the display. Therefore lamp frequency shall be
detached
from the horizontal synchronous frequency and its harmonics as far as possible in
order to avoid interference. In case using the inverter by PWM control, PWM
frequency may interference with frame frequency. We suggest that PWM frequency
is same as frame frequency.
Note 4: T= 25 , IL = 6mA. Brightness to be decrease to the 50% of the initial value.
Note 5: CN2 connector(backlight): BHSR-02VS-1(JST).
Mating connector: SM02B-BHSS-1-TB (JST).
Pin no. Symbol Function Remark
1 H CCFL power supply(H.V.) Cable color: Pink
2 L CCFL power supply(GND) Cable color: White
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 10/16
C. Optical specifications ( Note 1, Note 2, Note 3 )
Specification
Item Symbol Condition Unit Remark
Min. Typ. Max.
Response time
Rising time Tr =0 - 20 40 ms Note 4
Falling time Tf - 30 60
Contrast ratio CR =0 150 200 - Note 5
Viewing angle
Top 10 - -
Bottom CR 10 30 - - deg. Note 8
Left 40 - -
Right 40 - -
Brightness(5 points) YL =0 100 130 - nit Note 6,7,9
Wx 0.280 0.310 0.340
Color chromaticity(CIE) =0
Wy 0.300 0.330 0.360
Rx 0.547 0.577 0.607
Ry 0.298 0.328 0.358
Gx 0.270 0.300 0.330
Gy 0.545 0.575 0.605
Bx 0.115 0.145 0.175
By 0.090 0.120 0.150
White uniformity W - - 1.8 Note 9
Note 1: Ambient temperature = 25 .
Note 2: To be measured in dark room after backlight warm up 30 minutes.
Note 3: To be measured with a viewing cone of 1 by Topcon luminance meter BM-5A.
Note 4: Definition of response time:(To be measured by Topcon BM-5A)
The output signals of photodetector are measured when the input signals are changed
from "Black" to "White" (falling time) and from "White" to "Black" (rising time),
respectively. The response time interval between the 10% and 90% of amplitudes. Refer
to figure as below.
"Black"
"White" "White"
100%
Signal(Relative value)
90%
10%
0%
Tr Tf
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
SPEC NO. : 413-212-030
PAGE : 11/16
Note 5. Definition of contrast ratio:
Contrast ratio is calculated with the following formula.
Photodetector output when LCD is at "White" state
Contrast ratio (CR)=
Photodetector output when LCD is at "Black" state
Note 6: Definition of brightness:
YLD +YLE +YLG +YLI +YLJ
Brightness( YL)=
5
Note 7: Driving conditions for CCFT : IL= 6.0 mA
Note 8: Definition of viewing angle(To be measure at display center by LCD-7000):
Note 9: Definition of white uniformity:
White uniformity is defined as the following with thirteen measurements (A~M).
38 256 512 768 986
38
A B C
192
D E
384
F G H
576
I J (LINES)
K L M 730
Maximum Luminance of thirteen points(brightness)
W =
Minimum Luminance of thirteen points(brightness)
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 12/16
D. Reliability test items(Note 1)
Test tem Test Condition judgement Remark
High temperature storage 60 , 240Hrs Display quality Note 1, 2
Low temperature storage -20 , 240Hrs Display quality Note 1, 2
High temperature & high 40 , 90%RH, 240Hrs Display quality Note 1, 2
humidity operation (No condensation)
High temperature operation 50 , 240Hrs Display quality Note 1, 2
Low temperature operation 0 , 240Hrs Display quality Note 1, 2
Temperature cycling -20 ~60 Display quality Note 1, 2
(non-operation) 1H, 10mins, 1H, 5cycles
Electrostatic discharge 150PF, 150 , 10KV, 1second, 9 Display function Note 3
(non-operation) points on the panel, 10 times each place
Vibration Sweep:1G, 10HZ ~ 500HZ ~ 10HZ /2.5min Display quality Note 1, 2
(non-operation) 2 hour for each direction X, Y, Z
(6 Hrs in total)
Mechanical shock 50G, 11ms, X, Y, Z Display quality Note 1, 2
(non-operation) once for each direction
Note 1: Evaluation should be tested after storage at room temperature for one hour.
Note 2: There should be no change which might affect the practical display function when the
display quality test is conducted under normal operating condition.
Note 3: The discharging points are shown as below.
E. Display quality
The display quality of the color TFT-LCD module should be in compliance with the
unipac's Incoming inspection standard.
F. Handling precaution
The Handling of the TFT-LCD should be in compliance with the Unipac's handling principle
standard.
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 13/16
G. Packing form
LCD Module
Note 1.
Separate Pad
Anti-Static Bag
Note :
1.The panel of each LCD Module faces toward
seperation pad.
2.Max. capacity : 20 LCD Modules/Carton.
3.Max. weight : 14.6kg/Carton.
4.Meas. : 458mm*412mm*365mm.
2
Cushion
Carton
1
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 14/16
Fig.1-(a) LCM outline dimensions (Front side)
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 15/16
Fig.1-(b) LCM outline dimensions (Back side)
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
SPEC NO. : 413-212-030
PAGE : 16/16
(1 pixel / clock)
Tcl
invalid
Invalid
Thf
Tvf
Tch
1023,Y 1024,Y
X,767 X,768
Tds,Tes,Ths
Tdh,Teh,Thh
Tvd
Thd
Fig.2 Timing chart
Tv
X,3
Th
X,2
Th
X,1
3,Y
VIH
VIH
VIL
VIL
RGB,DE,Hs
CLK
2,Y
1,Y
Thb
Tve
The
Tvbl
Invalid
Tvw
Thw
Thbl
invalid
Tvpd
Tvf
Thf
1024,Y
X,767 X,768
VIH
VIH
VIL
VIL
RGB
RGB
CLK
DE
DE
Hs
Hs
Hs
Vs
Vs
ALL RIGHTS STRICTLY RESERVED. ANY PORTION OF THIS PRPER SHALL NOT BE REPRODUCED, COPIED, OR
TRANSFORMED TO ANY OTHER FORMS WITHOUT PERMISSION FROM UNIPAC OPTOELECTRONICS CORP.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com