Service Manuals, User Guides, Schematic Diagrams or docs for : . Various LCD Panels Panel_AUO_B150XG01_V7_0_[DS]
<< Back |
HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download
Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing.
If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
Preview not available!
Sorry, no preview image available for this document.
Possible reasons are : this is not a PDF document, it is password protected or the file is partially corrupted.
We are working to fix the issue.
You can still download the full file from the link below and it will be viewable.
>> Download Panel_AUO_B150XG01_V7_0_[DS] documenatation <<Text preview - extract from the document Global LCD Panel Exchange Center www.panelook.com
Product Functional Specification
15 inch XGA Color TFT LCD Module
Model Name : B150XG01 V.7
( ) Preliminary Specification
( ) Final Specification
Note: This Specification is subject to change without notice.
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
1/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
I. Contents
1.0 Handling Precautions
2.0 General Description
2.1 Characteristics
2.2 Functional Block Diagram
3.0 Absolute Maximum Ratings
4.0 Optical Characteristics
5.0 Signal Interface
5.1 Connectors
5.2 Signal Pin
5.3 Signal Description
5.4 Signal Electrical Characteristics
5.5 Signal for Lamp Connector
6.0 Pixel Format Image
7.0 Parameter Guide Line for CFL Inverter
8.0 Interface Timings
8.1 Timing Characteristics
8.2 Timing Definition
9.0 Power Consumption
10.0 Power ON/OFF Sequence
11.0 Mechanical Characteristics
II Record of Revision
Version and Date Page Old description New Description Remark
0.1. 2005/3/3 All First release All
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
2/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
1.0 Handing Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or
spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard
surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure
human earth when handling.
7) Do not open nor modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was
taken out from the container, do not press the center of the CCFL Reflector edge.
Instead, press at the far ends of the CFL Reflector edge softly. Otherwise the TFT
Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor
tilt the Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure (Notebook PC Bezel, for
example), do not twist nor bend the TFT Module even momentary. At designing the
enclosure, it should be taken into consideration that no bending/twisting forces are
applied to the TFT Module from outside. Otherwise the TFT Module may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow
local ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The
LCD module should be supplied by power complied with requirements of Limited Power
Source(2.11, IEC60950 or UL1950), or be applied exemption.
14) The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit(2.4,
IEC60950 or UL1950). Do not connect the CFL in Hazardous Voltage Circuit.
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
3/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2.0 General Description
This specification applies to the 15.0 inch Color TFT/LCD Module B150XG01.
This module is designed for a display unit of notebook style personal computer.
The screen format is intended to support the XGA (1024(H) x 768(V)) screen and 262k
colors (RGB 6-bits data driver).
All input signals are LVDS interface compatible.
This module does not contain an inverter card for backlight.
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
4/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 381
Active Area [mm] 304.1 X 228.1
Pixels H x V 1024(x3) x 768
Pixel Pitch [mm] 0.297X0.297
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode Normally White
Typical White Luminance [cd/m2] 180 (5 point average)
(ICFL=6.0mA) 200 (center)
Luminance Uniformity 1.25 max. (5 pts)
1.65 max. (13pts)
Contrast Ratio 300
Optical Rise Time/Fall Time [msec] 24/11
Nominal Input Voltage VDD [Volt] +3.3 Typ.
Typical Power Consumption [Watt] 5.6W
(VDD line + VCFL line)
Weight [Grams] 550g typ.
Physical Size [mm] 317.3 x 242.0 x 6.0 max.
Electrical Interface 1 channel LVDS
Support Color Native 262K colors ( RGB 6-bit data
driver )
Temperature Range
o
Operating [ C] 0 to +50
Storage (Shipping) [oC] -20 to +60
Surface Treatment 3H
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
5/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2.2 Functional Block Diagram
The following diagram shows the functional block of the 15.0 inches Color TFT/LCD
Module:
Backlight Unit
LCD DRIVE
CARD
6bit color
for R/G/B
LCD
DSPTMG Controller TFT
Vsync 1024(R/G/B) x 3
Hsync
(3 pairs LVDS)
DC-DC
Converter
DTCLK
Ref circuit
(1 pair LVDS)
Y-Driver
VDD
X-Driver
GND
LCD Connector
Lamp Connector
JAE JAE FI-XB30R-HF11
JST BHSR-02VS-1
Mating Type JAE FI-S30M
Mating Type SM02B-BHSS-1
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
6/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3.0 Absolute Maximum Ratings
Absolute maximum ratings of the module is as following:
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage VDD -0.3 +4.0 [Volt]
Input Voltage of Signal Vin -0.3 VDD+0.3 [Volt]
CCFL Current ICFL - 7 [mA]
rms
CCFL Ignition Voltage Vs - 1150 Vrms
Operating Temperature TOP 0 +50 [oC] Note 1
Operating Humidity HOP 8 95 [%RH] Note 1
o
Storage Temperature TST -20 +60 [ C] Note 1
Storage Humidity HST 5 95 [%RH] Note 1
Vibration 1.5 10-500 G Hz 2hr/axis, X,Y,Z
(random)
Shock 220 , 2 G ms Half sine wave
Note 1 : Maximum Wet-Bulb should be 39 and No condensation.
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
7/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
4.0 Optical Characteristics
The optical characteristics are measured under stable conditions as follows under 25
condition:
Item Conditions Typ. Note
Viewing Angle [degree]Horizontal (Right) 40 ----
[degree] K = 10 (Left) 40
K: Contrast Ratio [degree] Vertical (Upper) 10 --
[degree] K = 10 (Lower) 30 --
Contrast ratio 300 --
Luminance 1.25 max. (5 pts)
Uniformity 1.65 max. (13pts)
Response Time [msec] Rising 24 15(Max.)
(Room Temp.) [msec] Falling 11 30(Max.)
Color Red x 0.576+-0.03
Chromaticity Red y 0.326+-0.03
Coordinates (CIE) Green x 0.315+-0.03
Green y 0.542+-0.03
Blue x 0.149+-0.03
Blue y 0.135+-0.03
White x 0.313+-0.03
White y 0.329+-0.03
2
White Luminance [cd/m ]
(CCFL 6.0 mA) 180 (5 points average)
200 (center)
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
8/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
5.0 Signal Interface
5.1 Connectors
Physical interface is described as for the connector on module.
These connectors are capable of accommodating the following signals and will be following
components.
Connector Name / Designation For Signal Connector
Manufacturer JAE or compatible
Type / Part Number FI-XB30SR-HF11 or compatible
Mating Housing/Part Number FI-X30M, FI-X30C or FI-X30H
Mating Contact/Part Number FI-C3-A1
Connector Name / Designation For Lamp Connector
Manufacturer JST
Type / Part Number BHSR-02VS-1
Mating Type / Part Number SM02B-BHSS-1-TB
5.2 Signal Pin
Pin# Signal Name Pin# Signal Name
1 GND 2 VDD
3 VDD 4 VEDID
5 NC 6 CLKEDID
7 DATAEDID 8 RxIN0-
9 RxIN0+ 10 GND
11 RxlN1- 12 RxlN1+
13 GND 14 RxIN2-
15 RxIN2+ 16 GND
17 RxCLKIN- 18 RxCLKIN+
19 GND 20 GND
21 NC 22 NC
23 NC 24 NC
25 NC 26 NC
27 NC 28 NC
29 NC 30 NC
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
9/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
5.3 Signal Description
The module using a LVDS receiver. LVDS is a differential signal technology for LCD interface
and high speed data transfer device. Transmitter shall be SN75LVDS84 (negative edge
sampling) or compatible.
Signal Name Description
RxIN0-, RxIN0+ LVDS differential data input(Red0-Red5, Green0)
RxIN1-, RxIN1+ LVDS differential data input(Green1-Green5, Blue0-Blue1)
RxIN2-, RxIN2+ LVDS differential data input(Blue2-Blue5, Hsync, Vsync, DSPTMG)
RxCLKIN-, RxCLKIN0+ LVDS differential clock input
VDD +3.3V Power Supply
GND Ground
Note: Input signals shall be low or Hi-Z state when VDD is off.
Internal circuit of LVDS inputs are as following.
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
10/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Signal Input
SN75LVDS86 or Compatible
Pin No.
8 RxIN0-
R
9 RxIN0+
11 RxIN1-
R
12 RxIN1+
14 RxIN2-
R
15 RxIN2+
17 RxCLKIN-
R
18 RxCLKIN+
The module uses a 100ohm resistor between positive and negative data lines of
each receiver input
Signal Name Description
RED5 Red Data 5 (MSB) Red-pixel Data
RED4 Red Data 4 Each red pixel's brightness data consists of
RED3 Red Data 3 these 6 bits pixel data.
RED2 Red Data 2
RED1 Red Data 1
RED0 Red Data 0 (LSB)
Red-pixel Data
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
11/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
GREEN 5 Green Data 5 (MSB) Green-pixel Data
GREEN 4 Green Data 4 Each green pixel's brightness data consists of
GREEN 3 Green Data 3 these 6 bits pixel data.
GREEN 2 Green Data 2
GREEN 1 Green Data 1
GREEN 0 Green Data 0 (LSB)
Green-pixel Data
BLUE 5 Blue Data 5 (MSB) Blue-pixel Data
BLUE 4 Blue Data 4 Each blue pixel's brightness data consists of
BLUE 3 Blue Data 3 these 6 bits pixel data.
BLUE 2 Blue Data 2
BLUE 1 Blue Data 1
BLUE 0 Blue Data 0 (LSB)
Blue-pixel Data
DTCLK Data Clock The typical frequency is 54.0 MHZ.. The signal
is used to strobe the pixel data and DSPTMG
signals. All pixel data shall be valid at the falling
edge when the DSPTMG signal is high.
DSPTMG Display Timing This signal is strobed at the falling edge of
-DTCLK. When the signal is high, the pixel data
shall be valid to be displayed.
VSYNC Vertical Sync The signal is synchronized to -DTCLK .
HSYNC Horizontal Sync The signal is synchronized to -DTCLK .
Note: Output signals from any system shall be low or Hi-Z state when VDD is off.
5.4 Signal Electrical Characteristics
Input signals shall be low or Hi-Z state when VDD is off.
It is recommended to refer the specifications of SN75LVDS86DGG(Texas Instruments) in
detail.
Signal electrical characteristics are as follows;
Parameter Condition Min Max Unit
Differential Input High
Vth Voltage(Vcm=+1.2V) 100 [mV]
Differential Input Low
Vtl Voltage(Vcm=+1.2V) -100 [mV]
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
12/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LVDS Macro AC characteristics are as follows:
Min. Max.
Clock Frequency (T) 50MHZ 68MHZ
Data Setup Time (Tsu) 600ps
Data Hold Time (Thd) 600ps
T
Input Clock
Input Data
Tsu Thd
5.5 Signal for Lamp connector
Pin # Signal Name
1 Lamp High Voltage
2 Lamp Low Voltage
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
13/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6.0 Pixel Format Image
Following figure shows the relationship of the input signals and LCD pixel format.
VW /LQH 5 * % 5 * % 5 * % 5 * %
WK /LQH 5 * % 5 * % 5 * % 5 * %
7.0 Parameter guide line for CFL Inverter
Parameter Min DP-1 Max Units Condition
White Luminance
2 (Ta=25 )
5 points average - 180 [cd/m ]
CCFL current(ICFL) 3.0 6.0 7.0 [mA] (Ta=25 )
rms Note 2
CCFL Frequency(FCFL) 40 50 60 [KHz] (Ta=25 )
Note 3
CCFL Ignition Voltage(Vs) 1,150 [Volt] (Ta= 0 )
rms Note 4
CCFL Voltage (Reference) 700 [Volt] (Ta=25 )
(VCFL) rms Note 5
CCFL Power consumption 4.2 [Watt] (Ta=25 )
(PCFL) Note 5
Note 1: DP-1 are AUO recommended Design Points.
*1 All of characteristics listed are measured under the condition using the AUO Test inverter.
(C) Copyright AU Optronics, Inc.
August, 2001 All Rights Reserved. B150XG01 V7 Ver.01
14/19
No Reproduction and Redistribution Allowed.
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
*2 In case of using an inverter other than listed, it is recommended to check the inverter
carefully. Sometimes, interfering noise stripes appear on the screen, and substandard
luminance or flicker at low power may happen.
*3 In designing an inverter, it is suggested to check safety circuit ver carefully. Impedance of
CFL, for instance, becomes more than 1 [M ohm] when CFL is damaged.
*4 Generally, CFL has some amount of delay time after applying kick-off voltage. It is
recommended to keep on applying kick-off voltage for 1 [Sec] until discharge.
*5 CFL discharge frequency must be carefully chosen so as not to produce interfering noise
stripes on the screen.
*6 Reducing CFL current increases CFL discharge voltage and generally increases CFL
discharge frequency. So all the parameters of an inverter should be carefully designed so as
not to produce too much leakage current from high-voltage output of the inverter.
Note 2: It should be emplyed the inverter which has "Duty Dimming", if ICFL is less than 4mA.
Note 3: CFL discharge frequency should
be carefully determined to avoid interference between inverter and TFT LCD.
Note 4: CFL inverter should be able to give out a power that has a generating capacity of over
1,400 voltage. Lamp units need 1,400 voltage minimum for ignition.
Note 5: Calculator value for reference (ICFL
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo