Service Manuals, User Guides, Schematic Diagrams or docs for : . Various LCD Panels Panel_AUO_M195RTN01-1_CELL_0_[DS]
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
![Panel_AUO_M195RTN01-1_CELL_0_[DS]](/pics/5c36ae24970d7.gif)
>> Download Panel_AUO_M195RTN01-1_CELL_0_[DS] documenatation <<
Text preview - extract from the document
Product Specification M195RTN01.1
AU OPTRONICS CORPORATION
( ) Preliminary Specification
(V ) Final Specification
Module 19.5" Color TFT-LCD
Model Name M195RTN01.1 open cell
Customer Date Approved by Date
Howard Lee 21th, Mar 2013
Approved by Prepared by Date
Eric Lee 21th, Mar 2013
Note: This Specification is subject to
AU Optronics corporation
change without notice.
document version 1.0 1
Product Specification M195RTN01.1
AU OPTRONICS CORPORATION
Contents
1 Handling Precautions................................................................4
2 General Description ..................................................................5
2.1 Display Characteristics....................................................................................................... 5
2.2 Absolute Maximum Rating of Environment ........................................................................ 6
2.3 Optical Characteristics ....................................................................................................... 7
3 TFT-LCD Module ......................................................................10
3.1 Block Diagram.................................................................................................................. 10
3.2 Interface Connection........................................................................................................ 11
3.2.1 Connector Type....................................................................................................... 11
3.2.2 Connector Pin Assignment...................................................................................... 11
3.3 Electrical Characteristics.................................................................................................. 13
3.3.1 Absolute Maximum Rating ...................................................................................... 13
3.3.2 Recommended Operating Condition....................................................................... 13
3.4 Signal Characteristics ...................................................................................................... 14
3.4.1 LCD Pixel Format.................................................................................................... 14
3.4.2 LVDS Data Format .................................................................................................. 14
3.4.3 Color versus Input Data .......................................................................................... 15
3.4.4 LVDS Specification.................................................................................................. 16
3.4.5 Input Timing Specification ....................................................................................... 18
3.4.6 Input Timing Diagram .............................................................................................. 19
3.5 Power ON/OFF Sequence ............................................................................................... 20
4 Reliability Test ........................................................................21
5 Mechanical Characteristic .......................................................22
document version 1.0 2
Product Specification M195RTN01.1
AU OPTRONICS CORPORATION
Record of Revision
Version Date Page Old description New Description Remark
-
document version 1.0 3
Product Specification M195RTN01.1
AU OPTRONICS CORPORATION
1 Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
3) When the cell surface is soiled, wipe it with absorbent cotton or other soft cloth.
4) Since the cell is made of glass, it may break or crack if dropped or bumped on hard surface.
5) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
6) Do not press or pat the panel surface by fingers, hand or tooling.
7) Please handle TFT cell with care. The FPCs can only sustain for quite limited stress.
8) The cell package tray is packed in clean room. Please do pack & unpack it in clean room.
9) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT cell.
10) Pls avoid touching COF position while you are doing mechanical design.
11) When storing modules as spares for a long time, the following precaution is necessary:
Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep
the temperature between 5 and 35 at normal humidity.
document version 1.0 4
Product Specification M195RTN01.1
AU OPTRONICS CORPORATION
2 General Description
This specification applies to the 19.5 inch wide Color a-Si TFT-LCD Module M195RTN01.1.
The display supports the HD+ 1600(H) x 900(V) screen format and 16.7M colors (RGB 6-bits +
Hi-FRC data). The input interface is Dual channel LVDS.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
ITEMS Unit SPECIFICATIONS
Screen Diagonal [mm] 495.3 (19.5")
Active Area [mm] 433.92 (H) x 236.34(V)
Pixels H x V - 1600x3(RGB) x 900
Pixel Pitch [um] 271.2 x 262.6
Pixel Arrangement - R.G.B. Vertical Stripe
Display Mode - TN Mode, Normally White
Response Time [msec] 5 (Typ., on/off)
Power Consumption [Watt] VDD line : PDD (typ)=5.3 W
Weight [Grams] 335.6 gram
Electrical Interface - Dual channel LVDS
Support Color - 16.7M colors (RGB 6-bit + Hi_FRC )
Surface Treatment - Anti-Glare, 3H
Temperature Range 0 to +50
Operating -20 to +60
[oC]
Storage (Shipping)
6.17 (Typ.)
Cell transmittance [%] Base on AUO LED Backlight
5.27 (Min.)
Cell thickness [mm] 1.265
document version 1.0 5
Product Specification M195RTN01.1
AU OPTRONICS CORPORATION
2.2 Absolute Maximum Rating of Environment
Permanent damage may occur if exceeding the following maximum rating.
Symbol Description Min. Max. Unit Remark
o
TOP Operating Temperature 0 +50 [ C] Note 2-1
Glass surface temperature o Note 2-1
TGS 0 +65 [ C]
(operation) Function judged only
HOP Operation Humidity 5 90 [%RH] Note 2-1
TST Storage Temperature -20 +60 [oC]
HST Storage Humidity 5 90 [%RH]
Note 2-1: Temperature and relative humidity range are shown as the below figure.
1. 90% RH Max ( Ta 39)
2. Max wet-bulb temperature at 39 or less. ( Ta 39)
3. No condensation
Operating Range Storage Range
document version 1.0 6
Product Specification M195RTN01.1
AU OPTRONICS CORPORATION
2.3 Optical Characteristics
The optical characteristics are measured on the following test condition.
Test Condition:
1. Equipment setup: Please refer to Note 2-2.
2. Panel Lighting time: 30 minutes
3. VDD=5.0V, Fv=60Hz,Is=65mA,Ta=25
Symbol Description Min. Typ. Max. Unit Remark
T R Rising Time - 3.8 5.5
Note 2-3
TF Response Time Falling Time - 1.2 2.5 [msec]
By TRD-100
- Rising + Falling - 5 8
Note 2-4
CT Crosstalk - - 1.5 [%]
By SR-3
Note 2-5
FdB Flicker (Center of screen) - - -20 [dB]
By SR-3
Note 2-2: Equipment setup :
Photo detector (SR-3, TRD-100)
Measured distance (50cm)
LCD Panel TFT-LCD Module
Center of the screen
document version 1.0 7
Product Specification M195RTN01.1
AU OPTRONICS CORPORATION
Note 2-3: Response time measurement
The output signals of photo detector are measured when the input signals are changed
from "Black" to "White" (rising time, TR), and from "White" to "Black" (falling time, TF),
respectively. The response time is interval between the 10% and 90% of optical
response. (Black & White color definition: Please refer section 3.4.3)
% TF TR
100
90
Optical
White Black B lack W hite
response
10
0
1 Frame 1 Frame
Note 2-4: Crosstalk measurement
Definition:
CT = Max. (CTH,CTV);
Where
a.Maximum Horizontal Crosstalk :
CTH = Max. (| YBL ◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo