Service Manuals, User Guides, Schematic Diagrams or docs for : . Various LCD Panels Panel_AUO_M190PW01_V0_(0H_0J)_1_[DS]
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
![Panel_AUO_M190PW01_V0_(0H_0J)_1_[DS]](/pics/5c36ae882d956.gif)
>> Download Panel_AUO_M190PW01_V0_(0H_0J)_1_[DS] documenatation <<
Text preview - extract from the document
Global LCD Panel Exchange Center www.panelook.com
Product Specification M190PW01 V0 (0H/0J)
AU OPTRONICS CORPORATION
( ) Preliminary Specification
( V ) Final Specification
Module 19" WXGA+ Color TFT-LCD
Model Name M190PW01 V0 (0H/0J)
Checked &
Customer Date Date
Approved by
Arthur Chung 2009/8/5
Approved by Prepared by Date
Tony Kao 2009/8/5
Note: This Specification is subject to change Desktop Display Business Group /
without notice. AU Optronics corporation
document version 1.0 1/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification M190PW01 V0 (0H/0J)
AU OPTRONICS CORPORATION
Contents
1. Handling Precautions ..............................................................................................................4
2. General Description .................................................................................................................5
2.1 Display Characteristics ................................................................................................................... 5
3. Functional Block Diagram .....................................................................................................10
4. Absolute Maximum Ratings ..................................................................................................11
4.1 Absolute Ratings of TFT LCD Module ......................................................................................... 11
4.2 Absolute Ratings of Backlight Unit ............................................................................................... 11
4.3 Absolute Ratings of Environment.................................................................................................. 11
5. Electrical characteristics .......................................................................................................13
5.1 TFT LCD Module ........................................................................................................................ 13
5.2 Backlight Unit .............................................................................................................................. 15
6. Signal Characteristic..............................................................................................................17
6.1 Pixel Format Image ...................................................................................................................... 17
6.2 The Input Data Format ................................................................................................................. 18
6.4 Interface Timing ........................................................................................................................... 21
6.5 Power ON/OFF Sequence ............................................................................................................ 23
7. Connector & Pin Assignment................................................................................................24
7.1 TFT LCD Module ........................................................................................................................ 24
7.2 Backlight Unit .............................................................................................................................. 25
8. Reliability Test........................................................................................................................26
9. Shipping Label........................................................................................................................27
10. Mechanical Characteristics .................................................................................................27
document version 1.0 2/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification M190PW01 V0 (0H/0J)
AU OPTRONICS CORPORATION
Record of Revision
Version and Date Page Old description New Description Rem ark
0.1 2009/4/24 all First edition for all customer N/A
0.2 2009/6/10 Add note of *6 and *7:
*6 Both CCFLs in the CCFL set (2 CCFL lamps
on each side of a panel) is designed for
identical phase driving. Reversed phase
driving of CCFL set is not encouraged.
*7 For designing CCFL current, it is highly
recommended to use symmetric and
consistent sinusoidal wave for each CCFL
input current with asymmetric ration of 10%
or less in both positive area and negative
area (ie. 0.9* 2*Irms < I1 & I2 < 1.1*
15 N/A
2*Irms) as refer to the following diagram,
otherwise proper CCFL functionality cannot
be guarantied.
9. Shipping Label
27
28 2D drawing change (Add two ribs to increase strength.)
6.4.1 Timing Characteristics 6.4.1 Timing Characteristics
1.0 2009/8/5 21
document version 1.0 3/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification M190PW01 V0 (0H/0J)
AU OPTRONICS CORPORATION
1. Handling Precautions
1) Since front polarizer is easily damaged, pay attention not to scratch it.
2) Be sure to turn off power supply when inserting or disconnecting from input connector.
3) Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
4) When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth.
5) Since the panel is made of glass, it may break or crack if dropped or bumped on hard surface.
6) Since CMOS LSI is used in this module, take care of static electricity and insure human earth
when handling.
7) Do not open or modify the Module Assembly.
8) Do not press the reflector sheet at the back of the module to any directions.
9) In case if a Module has to be put back into the packing container slot after once it was taken out
from the container, do not press the center of the CCFL reflector edge. Instead, press at the far
ends of the CCFL Reflector edge softly. Otherwise the TFT Module may be damaged.
10) At the insertion or removal of the Signal Interface Connector, be sure not to rotate nor tilt the
Interface Connector of the TFT Module.
11) After installation of the TFT Module into an enclosure, do not twist nor bend the TFT Module
even momentary. At designing the enclosure, it should be taken into consideration that no
bending/twisting forces are applied to the TFT Module from outside. Otherwise the TFT Module
may be damaged.
12) Cold cathode fluorescent lamp in LCD contains a small amount of mercury. Please follow local
ordinances or regulations for disposal.
13) Small amount of materials having no flammability grade is used in the LCD module. The LCD module
should be supplied by power complied with requirements of Limited Power Source (IEC60950 or
UL1950), or be applied exemption.
14) The LCD module is designed so that the CCFL in it is supplied by Limited Current Circuit (IEC60950 or
UL1950). Do not connect the CCFL in Hazardous Voltage Circuit.
document version 1.0 4/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification M190PW01 V0 (0H/0J)
AU OPTRONICS CORPORATION
2. General Description
This specification applies to the 19 inch-wide Color TFT-LCD Module M190PW01.
The display supports the WXGA+ (1440(H) x 900(V)) screen format and 16.7M colors. All input signals are 2 Channel
LVDS interface compatible.
This module does not contain an inverter card for backlight.
.
2.1 Display Characteristics
The following items are characteristics summary on the table under 25 condition:
Items Unit Specifications
Active Area [mm] 408.24 (H) x 255.15(V)
Pixels H x V 1440x3(RGB) x 900
Pixel Pitch [mm] 0.2835x 0.2835
Pixel Arrangement R.G.B. Vertical Stripe
Display Mode TN Mode,Normally White
2
White Luminance [cd/m ] 300 cd/m2 @ 6.5mA (Typ)
Contrast Ratio 1000:1
Optical ResponseTime [msec] 5 (Typ, on/off)
Nominal Input Voltage VDD [Volt] +5.0 (Typ)
Power Consumption
[Watt] 25.5
(VDD line + CCFL line)
Weight [Grams] 1,900
Physical Size (H x V x D) [mm] 428.0(W) x 278.0(H) x 16.5(D) (Typ)
Electrical Interface Dual Channel LVDS
Surface Treatment Anti-glare type, Hardness 3H
Support Colors 16.7M colors (RGB 6-bits+HiFRC)
Temperature Range
Operating [oC] 0 to +50
o
Storage (Shipping) [ C] -20 to +60
RoHS Compliance RoHS Compliance
document version 1.0 5/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification M190PW01 V0 (0H/0J)
AU OPTRONICS CORPORATION
2.2 Optical Characteristics
The optical characteristics are measured under stable conditions at 25 (Room Temperature):
Item Unit Conditions Min. Typ. Max. Note
Horizontal (Right) 70 85
-
CR = 10 (Left) 70 85
Vertical (Up) 70 80
-
CR = 10 (Down) 70 80
Viewing Angle [degree] 1
Horizontal (Right) 75 85
--
CR = 5 (Left) 75 85
Vertical (Right) 75 85
--
CR = 5 (Left) 75 85
Luminance Uniformity [%] 9 Points 75 80 - 2, 3
Rising - 3.6 5.7
Optical Response Time [msec] Falling - 1.4 2.3 4, 6
Rising + Falling - 5 8
Color / Chromaticity Red x
Coordinates 0.617 0.647 0.677
(CIE 1931) Red y 0.308 0.338 0.368
Green x 0.260 0.290 0.320
Green y 0.564 0.594 0.624
4
Blue x 0.115 0.145 0.175
Blue y 0.037 0.067 0.097
White x 0.283 0.313 0.343
White y 0.299 0.329 0.359
White Luminance
[cd/m2 ] 250 300 - 4
(At CCFL= 6.5mA)
Contrast Ratio 600 1000 - 4
Cross Talk (At 75Hz) [%] - - 1.5 5
Flicker [dB] - - -20 7
Optical Equipment: BM-5A, BM-7, PR880, or equivalent
document version 1.0 6/28
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Product Specification M190PW01 V0 (0H/0J)
AU OPTRONICS CORPORATION
Note 1: Definition of viewing angle
Viewing angle is the measurement of contrast ratio 10, at the screen center, over a 180◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo