Service Manuals, User Guides, Schematic Diagrams or docs for : . Various LCD Panels Panel_AUO_T260XW02_V4_0_[DS]
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
![Panel_AUO_T260XW02_V4_0_[DS]](/pics/5c36b27ea574c.gif)
>> Download Panel_AUO_T260XW02_V4_0_[DS] documenatation <<
Text preview - extract from the document
Global LCD Panel Exchange Center www.panelook.com
Document Version: 1.3
Date: 2006/1/17
Product Specifications
26.0" WXGA Color TFT-LCD Module
Model Name: T260XW02 V4
( ) Preliminary Specifications
(*) Final Specifications
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 1/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Contents
No ITEM
COVER
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTION MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATIONS
3-1 ELECTRICAL CHARACTERISTICS
3-2 INTERFACE CONNECTIONS
3-3 SIGNAL TIMING SPECIFICATIONS
3-4 SIGNAL TIMING WAVEFORMS
3-5 COLOR INPUT DATA REFERENCE
3-6 POWER SEQUENCE
4 OPTICAL SPECIFICATIONS
5 MECHANICAL CHARACTERISTICS
6 RELIABILITY
7 INTERNATIONAL STANDARDS
7-1 SAFETY
7-2 EMC
8 PACKING
9 PRECAUTIONS
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 2/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Record of Revision
Version Date No Old Description New Description Remark
1.0 7/12 `05 Original version
1.1 10/11 `05 First release
1.2 12/15 `05 Timing update
Modify inverter mylar shielding screw hole
1.3 1/17 `06 portion
p.20~21
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 3/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
1. General Description
This specification applies to the 26.0 inch Color TFT-LCD Module T260XW02. This LCD module has a TFT
active matrix type liquid crystal panel 1366x768 pixels, and diagonal size of 26.0 inch. This module supports
1366x768 XGA-WIDE mode (Non-interlace).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical stripes. Gray
scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale signal for each dot.
The T260XW02 has been designed to apply the 8-bit 1 channel LVDS interface method. It is intended to
support displays where high brightness, wide viewing angle, high color saturation, and high color depth are
very important.
* General Information
Items Specification Unit Note
Active Screen Size 26.0 inches
Display Area 575.769 (H) x 323.712(V) mm
Pixel Pitch 0.4215 mm
Outline Dimension 626.0 (H) x 373.0 (V) x 43.3(D) mm With inverter
Driver Element a-Si TFT active matrix
Display Colors 16.7M Colors
Number of Pixels 1366 x 768 Pixel
Pixel Arrangement RGB vertical stripe
Display Mode Normally Black
BL Structure 8 U-Lamps
Surface Treatment AG, 3H
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 4/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to the unit.
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage VDD -0.3 13.2 [Volt] Note 1
Input Voltage of Signal Vin -0.3 3.6 [Volt] Note 1
BLU Input Voltage VDDB -0.3 27.0 [Volt] Note 1
BLU Brightness Control Voltage BLON -0.3 6.0 [Volt] Note 1
Operating Temperature TOP 0 +50 [oC] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
Storage Temperature TST -20 +60 [oC] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
Note 1 : Duration = 50msec
Note 2 : Maximum Wet-Bulb should be 39 and No condensation.
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 5/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3. Electrical Specification
The T260XW02 requires two power inputs. One is employed to power the LCD electronics and to drive the
TFT array and liquid crystal. The second input power for the BLU, is to power inverter..
3-1 Electrical Characteristics
Values
Parameter Symbol Unit Notes
Min. Typ. Max.
LCD:
Power Supply Input Voltage Vcc 10.8 12.0 13.2 VDC
Power Supply Input Current Icc - 583 682 mA 1
Power Consumption Pc - 7.0 9.0 Watt 1
Inrush Current IRUSH - - 3.0 Apeak 2
Backlight Power Consumption 72 81.6 Watt
Life Time 50,000 60,000 Hours 3
Note :
1. Vcc=12.0V,f v = 60Hz, f CLK = 81.0 MHz , 25 .
2. Duration = 470 s
3. The performance of the Lamp in LCM, for example: lifetime or brightness, is extremely influenced by the characteristics
of the DC-AC Inverter. So all the parameters of an inverter should be carefully designed so as not to produce too much
leakage current from high-voltage output of the inverter. When you design or order the inverter, please make sure
unwanted lighting caused by the mismatch of the lamp and the inverter (no lighting, flicker, etc) never occurs. When you
confirm it, the LCD Assembly should be operated in the same condition as installed in your instrument.
4. Do not attach a conducting tape to lamp connecting wire. If the lamp wire attach to conducting tape, TFT-LCD Module
have a low luminance and the inverter has abnormal action because leakage current occurs between lamp wire and
conducting tape.
5. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At temperatures greater than
40 , the wet bulb temperature must not exceed 39 . When operate at low temperatures, the brightness of CCFL will
drop and the lifetime of CCFL will be reduced.
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 6/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-2 Interface Connections
- LCD connector (CN1): FI-X30SSL-HF (JAE) or equivalent
- Mating Connector: FI-X30H (JAE), FI-X30HL (JAE-Lock type) or equivalent
- LVDS Transmitter: SN75LVDS83(Texas Instruments) or equivalent
Note:
1. All GND (ground) pins should be connected together and should also be connected to the LCD's metal frame. All Vcc
(power input) pins should be connected together.
Pin No Symbol Description Default
1 VCC +12V, DC, Regulated
2 VCC +12V, DC, Regulated
3 VCC +12V, DC, Regulated
4 VCC +12V, DC, Regulated
5 GND Ground and Signal Return
6 GND Ground and Signal Return
7 GND Ground and Signal Return
8 GND Ground and Signal Return
9 LVDS Option Low/Open for Normal (NS), High for JEIDA Option
10 Reserved Open or High AUO internal test
11 GND Ground and Signal Return for LVDS
12 RXIN0- LVDS Channel 0 negative
13 RXIN0+ LVDS Channel 0 positive
14 GND Ground and Signal Return for LVDS
15 RXIN1- LVDS Channel 1 negative
16 RXIN1+ LVDS Channel 1 positive
17 GND Ground and Signal Return for LVDS
18 RXIN2- LVDS Channel 2 negative
19 RXIN2+ LVDS Channel 2 positive
20 GND Ground and Signal Return for LVDS
21 RXCLKIN- LVDS Clock negative
22 RXCLKIN+ LVDS Clock positive
23 GND Ground and Signal Return for LVDS
24 RXIN3- LVDS Channel 3 negative
25 RXIN3+ LVDS Channel 3 positive
26 GND Ground and Signal Return for LVDS
27 Reserved Open or High AUO internal test
28 Reserved Open or High AUO internal test
29 GND Ground and Signal Return
30 GND Ground and Signal Return
** LVDS Option : Low/Open NS (Normal)
High (3.3V) JEIDA
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 7/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
LVDS Option = H (3.3V) JEIDA
Previous Cycle Current Cycle Next Cycle
Clock
RIN0+
R3 R2 G2 R7 R6 R5 R4 R3 R2 G2
RIN0-
RIN1+ G4 G3 B3 B2 G6 G6 G5 G4 G3 B3
RIN1-
RIN2+
B5 B4 DE NA NA B7 B6 B5 B4 DE
RIN2-
RIN3+
R1 R0 NA B1 B0 G1 G0 R1 R0 NA
RIN3-
LVDS Option = GND or OPEN NS
Previous Cycle Current Cycle Next Cycle
Clock
RIN0+
R1 R0 G0 R5 R4 R3 R2 R1 R0 G0
RIN0-
RIN1+ G2 G1 B1 B0 G5 G4 G3 G2 G1 B1
RIN1-
RIN2+
B3 B2 DE NA NA B5 B4 B4 B2 DE
RIN2-
RIN3+
R7 R6 NA B7 B6 G7 G6 R7 R6 NA
RIN3-
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 8/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
BACKLIGHT CONNECTOR PIN CONFIGURATION
1. Electrical specification
(Ta=25 5 )
No ITEM SYMBOL CONDITION MIN TYP MAX UNIT Note
1 Input Voltage VDDB --- 21.6 24.0 26.4 VDC
VDDB=24V
2 Input Current IDDB --- 3.0 3.4 ADC VDIM: Open
Max. Brightness
VDDB=24V
3 Input Power PDDB --- 72 81.6 W VDIM: Open
Dimming Max.
VDDB=24V
4 Input inrush current, 0.3ms IRUSH --- --- 3.4 ADC VDIM: Open
Dimming Max.
5 Output Frequency FBL VDDB=24V --- 58 --- kHz
ON VDDB=24V 2.0 3.3 5.0 VDC or Open
6 ON/OFF Control Voltage VBLON
OFF VDDB=24V 0.0 --- 0.8 VDC
7 ON/OFF Control Current IBLON VDDB=24V -1 --- 1.5 mA DC
MAX --- 2.0 3.3 5.0 VDC or Open
8 External PWM Control Voltage EVPWM
MIN --- -0.3 --- 0.8 VDC
MAX PWM=100% 0.5 --- --- mA DC
9 External PWM Control Current EIPWM
MIN PWM=100% 0.5 --- --- mA DC
10 External PWM Duty Ratio EDPWM --- 30 --- 100 %
11 External PWM Frequency EF PWM --- 120 180 300 Hz
2. Input specification
CN1: S14B-PH-SM3-TB(JST) or Compatible CN2: S2B-ZR-SM3A-TF(JST) or Compatible
CN3~10: SM02(12)B-BHS-1-TB(JST) or Compatible
Pin No Symbol Description Default
1 VIN Operating Voltage Supply, +24V DC regulated 24V
2 VIN Operating Voltage Supply, +24V DC regulated 24V
3 VIN Operating Voltage Supply, +24V DC regulated 24V
4 VIN Operating Voltage Supply, +24V DC regulated 24V
5 VIN Operating Voltage Supply, +24V DC regulated 24V
6 GND Ground GND
7 GND Ground GND
8 GND Ground GND
9 GND Ground GND
10 GND Ground GND
11 Reserved N.C.* -
12 BL ON/OFF On/Off Control -
13 PWM DIM External PWM Dimming Control -
14 Reserved N.C.** -
*: Pin11 and Pin14 are floating
** : Pin14 setting can use GND or 3.3V and w/o any function problem
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 9/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3. Backlight Diagram
HOT: High Voltage
HOT 1(PINK)
HOT 2(WHITE)
HOT 3(PINK)
HOT 4(WHITE)
HOT 13(PINK)
HOT 14(WHITE)
HOT 15(PINK)
HOT 16(WHITE)
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 10/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-3 Signal Timing Specifications
This is the signal timing required at the input of the User connector. All of the interface signal timing should
be satisfied with the following specifications for it's proper operation.
* Timing Table
DE only Mode
Signal Item Symbol Min Type Max Unit
Period Tv 789 822 Th
Active Tdisp (v) -- 768 -- Th
Vertical Section Blanking Tblk (v) 21 54 Th
Period Th 1414 1722 Tclk
Active Tdisp (h) -- 1366 -- Tclk
Horizontal Section Blanking Tblk (h) 48 356 Tclk
Period CLK -- -- 18.18 ns
Clock
Frequency Freq 55 88 MHz
Vertical Frequency Frequency Vs 58 60 62 Hz
Horizntal Frequency Frequency Hs 47.34 49.32 KHz
Vertical Frequency Frequency Vs 48 50 52 Hz
Horizntal Frequency Frequency Hs 39.45 41.1 KHz
*1) DCLK signal input must be valid while power supply is applied.
*2) Display position is specific by the rise of ENAB signal only.
Horizontal display position is specified by the falling edge of 1st DCLK right after the rise of ENAB, is
displayed on the left edge of the screen.
Vertical display position is specified by the rise of ENAB after a "Low" level period equivalent to eight times
of horizontal period. The 1 st data corresponding to one horizontal line after the rise of ENAB is displayed at
the top line of screen.
*3.) If a period of ENAB "High" is less than 1366 DCLK or less than 768 lines, the rest of the screen
displays black.
*4.) The display position does not fit to the screen if a period of ENAB "High" and the effective data period
do not synchronize with each other.
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 11/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-4 Signal Timing Waveforms
RGB Data
CLK
DE
RGB
Data
DE
Line
768
1366
Pixel
Tclk
Invalid Data
Invalid Data
Line
Th
1
Pixel
1
Pixel
2
Tv
Line
2
Pixel
3
Pixel
4
Tdisp(h)
Line
3
Pixel
Th
5
Tdisp(v)
Pixel
6
Line
4
1366
Pixel
Line
768
Invalid Data
Invalid Data
Pixel
1
Pixel
2
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 12/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-5 Color Input Data Reference
The brightness of each primary color (red, green and blue) is based on the 8 bit gray scale data input for the
color; the higher the binary input, the brighter the color. The table below provides a reference for color versus
data input.
COLOR DATA REFERENCE
Input Color Data
Color RED GREEN BLUE
MSB LSB MSB LSB MSB LSB
R7 R6 R5 R4 R3 R2 R1 R0 G7 G6 G5 G4 G3 G2 G1 G0 B7 B6 B5 B4 B3 B2 B1 B0
Black 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Red(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
Green(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
Basic Blue(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Color Cyan 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
Magenta 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Yellow 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
White 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
RED(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED(001) 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED ----
RED(254) 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
RED(255) 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GREEN(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
GREEN(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0
GREEN ----
GREEN(254) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0
GREEN(255) 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1 0 0 0 0 0 0 0 0
BLUE(000) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
BLUE(001) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
BLUE -------
BLUE(254) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 0
BLUE(255) 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 1 1 1 1 1 1
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 13/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
3-6 Power Sequence
90% 90%
Power Supply For LCD
Vcc (+12V) 10% 10% 10%
GND
t1 t2
t5 t6 t7
Interface Signal
10% Valid Data 10%
(LVDS data & CLK) GND
t3 t4
Backlight on/off
control signal
(VBLON)
Parameter Values Units
Min. Typ. Max.
t1 470 - 1000 us
t2 20 - 50 ms
t3 700 or (200)*1 - - ms
t4 200 - - ms
t5 50 - - ms
t6 0.47 - 30 ms
t7 1 - - s
*1: If t3=200ms, input black signal till 700ms from system is necessary.
In case of t3<200ms, the abnormal display will be happened. But it will not damage timing
controller.
Note:
The timing controller will not be damaged in case of TV set AC input power suddenly shut down.
Once power reset, it should follow power sequence as spec. definition.
(1) Apply the lamp voltage within the LCD operation range. When the back-light turns on before the
LCD operation or the LCD turns off before the back-light turns off, the display may momentarily
become abnormal screen.
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 14/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Power Sequence for Inverter
90% 24V(typ.) 90%
Power input for Backlight 10%
VDDB
T1 T2 T4
Enable
Back light on/off
(VBLON) T3
Dimming control signal
EVPWM
Deep condition for Inverter
VDDB T5
VDDB(Typ)
V
Parameter Values Units
Min. Typ. Max.
T1 20 - - ms
T2 500 - - ms
T3 0 - - ms
T4 1 - - ms
T5 - - 10 ms
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 15/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
4. Optical Specification
Optical characteristics are determined after the unit has been `ON' and stable for approximately 45 minutes in
a dark environment at 25 . The values specified are at an approximate distance 50cm from the LCD surface
at a viewing angle of and equal to 0 .
Fig.1 1 presents additional information concerning the measurement equipment and method.
Values Units Notes
Parameter Symbol
Min. Typ. Max.
Contrast Ratio CR 500 600 1
Dark Luminance LBK 1.0 cd/ 2
Surface Luminance,
LWH 400 500 cd/ 2
white
Luminance Variation WHITE 5p 1.3 3
Response Rise Time TrR 15
ms 4
Time Decay Time TrD 5
Gray to Gray T 8 ms 5
Color Coordinates
RX 0.640
RED
RY 0.330
GX 0.270
GREEN
GY 0.600
Typ.-0.03 Typ.+0.03
BX 0.150
BLUE
BY 0.060
WX 0.280
WHITE
WY 0.290
Viewing Angle
x axis, right( =0 ) r 88 Degree
x axis, left( =180 ) l 88 Degree 6
y axis, up( =90 ) u 88 Degree
y axis, down ( =0 ) d 88 Degree
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 16/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Note:
1. Contrast Ratio (CR) is defined mathematically as:
Surface Luminance of Lon1
Contrast Ratio=
Surface Luminance of Loff1
2. Surface luminance is luminance value at point 1 across the LCD surface 50cm from the surface with all pixels displaying white.
From more information see FIG 2. When VDDB = 24V, IDDB = 3.5A. LWH=Lon1
Where Lon1 is the luminance with all pixels displaying white at center 1 location.
3. The variation in surface luminance, WHITE is defined (center of Screen) as:
WHITE(5P)= Maximum(Lon1, Lon2,...Lon5) / Minimum(Lon1, Lon2,...,Lon5)
4. Response time is the time required for the display to transition from black to white(Rise Time, TrR) and from white to black
(Decay Time, Tr D). For additional information see FIG3.
5. T is the response time between any two gray scale and is based on fv=60Hz to optimize.
6. Viewing angle is the angle at which the contrast ratio is greater than 10. The angles are determined for the horizontal or x axis
and the vertical or y axis with respect to the z axis which is normal to the LCD surface. For more information see FIG4.
FIG. 2 Luminance
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 17/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
FIG.3 Response Time
The response time is defined as the following figure and shall be measured by switching the input signal for
"black" and "white".
Any brighter gray level (White) Any brighter gray level (White)
100%
90%
Optical
Response
n
a
n
c
e
Any darker gray (Black)
10%
0
TrD TrR Time
FIG.4 Viewing angle
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 18/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
5. Mechanical Characteristics
The contents provide general mechanical characteristics for the model T260XW02. In addition the figures in
the next page are detailed mechanical drawing of the LCD.
Horizontal 626.0mm
Outline Dimension Vertical 373.0mm
Depth 43.3mm(w/i mylar inverter & Shielding)
Horizontal 580.8mm
Bezel Area
Vertical 328.8mm
Horizontal 575.769mm
Active Display Area
Vertical 323.712mm
Weight 4200g (Typ.)
Surface Treatment Anti-Glare (3H), Haze=40%
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 19/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Front View
2. l C-D l<1.6mm
1. l A-B l<1.6mm
notes:
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 20/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Rear View
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 21/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
6. Reliability
Environment test condition
No Test Item Condition
1 High temperature storage test Ta=60 240h
2 Low temperature storage test Ta=-20 240h
3 High temperature operation test Ta=50 80%RH 240h
4 Low temperature operation test Ta=0 240h
Wave form: random
Vibration level : 1.0G RMS
Vibration test
5 Bandwidth : 10-500Hz
(non-operating)
Duration: X, Y, Z 20min
One time each direction
Shock level: 100G
Shock test Waveform: half since wave, 2ms
6
(non-operating) Direction: X, Y, Z
One time each direction
Vibration test Random Vibration:10~200Hz,1.5G,30minutes
7
(with carton) in each X,Y,Z direction
Height: 53.3cm
Drop test
8 1 corner, 3 edges, 6 surfaces
(with carton)
(ASTMD4169-I)
Altitude
9 50,000 feet (12Kpa)
Storage/shipment
Result Evaluation Criteria
There should be no change which might affect the practical display function when the display quality test is
conducted under normal operating condition.
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 22/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 23/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
7. International Standard
7-1. Safety
(1) UL1950 Third Edition, Underwriters Laboratories, Inc. Jan. 28, 1995
Standard for Safety of Information Technology Equipment Including electrical Business Equipment.
(2) CAN/CSA C22.2 No. 950-95 Third Edition, Canadian Standards Association, Jan. 28, 1995
Standard for Safety of Information Technology Equipment Including Electrical Business Equipment.
(3) EN60950 : 1992+A2: 1993+A2: 1993+C3: 1995+A4: 1997+A11: 1997
IEC 950: 1991+A1: 1992+A2: 1993+C3: 1995+A4:1996
European Committee for Electrotechnical Standardization (CENELEC)
EUROPEAN STANDARD for Safety of Information Technology Equipment Including Electrical
Business Equipment.
7-2. EMC
a) ANSI C63.4 "Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical
and Electrical Equipment in the Range of 9kHz to 40GHz. "American National standards
Institute(ANSI), 1992.
b) C.I.S.P.R "Limits and Methods of Measurement of Radio Interface Characteristics of Information
Technology Equipment." International Special committee on Radio Interference.
c) EN 55022 "Limits and Methods of Measurement of Radio Interface Characteristics of Information
Technology Equipment." European Committee for Electrotechnical Standardization. (CENELEC),
1998.
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 24/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
8. Packing
Label sample 83mm * 23mm
V4
Carton Label
AU Optronics QTY: 4
MODEL NO: T260XW02 V4
PART NO: 97.26T02.XXX
CUSTOMER NO:
CARTON NO:
Made in *PM100-01A1600001*
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 25/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Carton Size 767(L)mm*330(W)mm*480(H)mm
4pcs Modules
Cushion top
Cushion set
Cushion down
V
4pcs / 1 carton
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 26/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
9. PRECAUTIONS
Please pay attention to the followings when you use this TFT LCD module.
9-1 MOUNTING PRECAUTIONS
(1) You must mount a module using holes arranged in four corners or four sides.
(2) You should consider the mounting structure so that uneven force (ex. Twisted stress) is not applied
to module. And the case on which a module is mounted should have sufficient strength so that external
force is not transmitted directly to the module.
(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer.
Transparent protective plate should have sufficient strength in order to the resist external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former
generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break
by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB
pencil lead. And please do not rub with dust clothes with chemical treatment. Do not touch the surface
of polarizer for bare hand or greasy cloth. (Some cosmetics are detrimental to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials
like chamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the
adhesives used to attach front/ rear polarizers. Do not use acetone, toluene and alcohol because they
cause chemical damage to the polarizer.
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes
deformations and color fading.
(9) Do not open the case because inside circuits do not have sufficient strength.
9-2 OPERATING PRECAUTIONS
(1) The spike noise causes the mis-operation of circuits. It should be lower than following voltage: V=
200mV(Over and under shoot voltage)
(2) Response time depends on the temperature. (In lower temperature, it becomes longer..)
(3) Brightness depends on the temperature. (In lower temperature, it becomes lower.) And in lower
temperature, response time (required time that brightness is stable after turned on) becomes longer.
(4) Be careful for condensation at sudden temperature change. Condensation makes damage to
polarizer or electrical contacted parts. And after fading condensation, smear or spot will occur.
(5) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(6) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall
be done by system manufacturers. Grounding and shielding methods may be important to minimize the
interface.
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 27/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
9-3 ELECTROSTATIC DISCHARGE CONTROL
Since a module is composed of electronic circuits, it is not strong to electrostatic discharge. Make certain that
treatment persons are connected to ground through wrist band etc. And don't touch interface pin directly.
9-4 PRECAUTIONS FOR STRONG LIGHT EXPOSURE
Strong light exposure causes degradation of polarizer and color filter.
9-5 STORAGE
When storing modules as spares for a long time, the following precautions are necessary.
(1) Store them in a dark place. Do not expose the module to sunlight or fluorescent light. Keep the
temperature between 5 and 35 at normal humidity.
(2) The polarizer surface should not come in contact with any other object. It is recommended that they
be stored in the container in which they were shipped.
9-6 HANDLING PRECAUTIONS FOR PROTECTION FILM
(1) The protection film is attached to the bezel with a small masking tape. When the protection film is
peeled off, static electricity is generated between the film and polarizer. This should be peeled off
slowly and carefully by people who are electrically grounded and with well ion-blown equipment or in
such a condition, etc.
(2) When the module with protection film attached is stored for a long time, sometimes there remains a
very small amount of flue still on the Bezel after the protection film is peeled off.
(3) You can remove the glue easily. When the glue remains on the Bezel or its vestige is recognized,
please wipe them off with absorbent cotton waste or other soft material like chamois soaked with
normal-hexane.
Copyright AU Optronics, Inc.
January, 2005 All Rights Reserved. T260XW02 V4-Spec. Ver1.3 28/27
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo