Service Manuals, User Guides, Schematic Diagrams or docs for : . Various LCD Panels Panel_AUO_T260XW02_VT_0_[DS]

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

Preview not available!
Sorry, no preview image available for this document.
Possible reasons are : this is not a PDF document, it is password protected or the file is partially corrupted.
We are working to fix the issue.
You can still download the full file from the link below and it will be viewable.

>> Download Panel_AUO_T260XW02_VT_0_[DS] documenatation <<

Text preview - extract from the document

Global LCD Panel Exchange Center www.panelook.com

Product Description: T260XW02 TFT-LCD PANEL with RoHS Guarantee

AUO Model Name: T260XW02 VT

Customer Part No/Project Name:

Customer Signature Date AUO Date

Approved By: PM Director/ Frank Hsu

Reviewed By: RD Director/ Eugene Chen

Reviewed By: Project Leader/ Jimson Jeng

Prepared By: PM/ Alvin Chung

Copyright AU Optronics, Inc.
March, 2009 All Rights Reserved. T260XW02 VT - Spec. Ver0.0
0/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Document Version: 0.0
Date: 2009/03/30

Product Specifications

26.0" WXGA Color TFT-LCD Module
Model Name: T260XW02 VT

(*) Preliminary Specifications
() Final Specifications

Copyright AU Optronics, Inc.
March, 2009 All Rights Reserved. T260XW02 VT - Spec. Ver0.0
1/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Contents

No ITEM
COVER
CONTENTS
RECORD OF REVISIONS
1 GENERAL DESCRIPTION
2 ABSOLUTION MAXIMUM RATINGS
3 ELECTRICAL SPECIFICATIONS
3-1 ELECTRICAL CHARACTERISTICS
3-2 INTERFACE CONNECTIONS
3-3 SIGNAL TIMING SPECIFICATIONS
3-4 SIGNAL TIMING WAVEFORMS
3-5 COLOR INPUT DATA REFERENCE
3-6 POWER SEQUENCE for LCD
3-7 POWER SEQUENCE for INVERTER
4 OPTICAL SPECIFICATIONS
5 MECHANICAL CHARACTERISTICS
5-1 FRONT VIEW
5-2 REAR VIEW
6 RELIABILITY
7 INTERNATIONAL STANDARDS
7-1 SAFETY
7-2 EMC
7-3 GREEN
8 PACKING
9 PRECAUTIONS

Copyright AU Optronics, Inc.
March, 2009 All Rights Reserved. T260XW02 VT - Spec. Ver0.0
2/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

Record of Revision
Version Date No Old Description New Description Remark

0.0 2009/03/30 First release

Copyright AU Optronics, Inc.
March, 2009 All Rights Reserved. T260XW02 VT - Spec. Ver0.0
3/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

1. General Description
This specification applies to the 26.0 inch Color TFT-LCD Module T260XW02 VT. This LCD module
has a TFT active matrix type liquid crystal panel 1366x768 pixels, and diagonal size of 26.0 inch.
This module supports 1366x768 XGA-WIDE mode (Non-interlace).
Each pixel is divided into Red, Green and Blue sub-pixels or dots which are arranged in vertical
stripes. Gray scale or the brightness of the sub-pixel color is determined with a 8-bit gray scale
signal for each dot.
The T260XW02 VT has been designed to apply the 8-bit 1 channel LVDS interface method. It is
intended to support displays where high brightness, wide viewing angle, high color saturation, and
high color depth are very important. The T260XW02 VT model is RoHS verified which can be
distinguished on panel label.

* General Information

Items Specification Unit Note
Active Screen Size 26.0 inches
Display Area 575.769 (H) x 323.712(V) mm
Outline Dimension 626.0 (H) x 373.0 (V) x 43.5(D) mm With inverter
Driver Element a-Si TFT active matrix
Display Colors 16.7M Colors
Number of Pixels 1366 x 768 Pixel
Pixel Pitch 0.4215 mm
Pixel Arrangement RGB vertical stripe
Display Mode Normally Black
Surface Treatment AG, Haze=11%, 3H

Copyright AU Optronics, Inc.
March, 2009 All Rights Reserved. T260XW02 VT - Spec. Ver0.0
4/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

2. Absolute Maximum Ratings
The following are maximum values which, if exceeded, may cause faulty operation or damage to
the unit.

Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage VCC -0.3 13.2 [Volt] Note 1
Input Voltage of Signal Vin -0.3 3.6 [Volt] Note 1
BLU Input Voltage VDDB -0.3 27.0 [Volt] Note 1
BLU Brightness Control Voltage VDIM -0.3 6.0 [Volt] Note 1
Operating Temperature TOP 0 +50 [oC] Note 2
Operating Humidity HOP 10 90 [%RH] Note 2
Storage Temperature TST -20 +60 [oC] Note 2
Storage Humidity HST 10 90 [%RH] Note 2
Panel Surface Temperature PST 65 [oC] Note 3

Note 1: Duration = 1 sec
Note 2: Maximum Wet-Bulb should be 39 and No condensation.

The relative humidity must not exceed 90% non-condensing at temperatures of 40 or less. At temperatures greater
than 40 , the wet bulb temperature must not exceed 39 .

Note 3: Surface temperature is measured at 50 Dry condition.

Copyright AU Optronics, Inc.
March, 2009 All Rights Reserved. T260XW02 VT - Spec. Ver0.0
5/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

3. Electrical Specification
The T260XW02 VT requires two power inputs. One is employed to power the LCD electronics and
to drive the TFT array and liquid crystal. The second input power for the BLU is to power inverter.

3-1 Electrical Characteristics

Values
Parameter Symbol Min Typ Max Unit Notes
LCD:
Power Supply Input Voltage Vcc 10.8 12 13.2 Vdc 1
Power Supply Input Current Icc - 0.35 0.43 A 2
Power Consumption Pc - 4.2 5.16 Watt 2
Inrush Current IRUSH - - 3.0 Apeak 3
Differential Input High
VTH +100 mV 4
Threshold Voltage
LVDS Differential Input Low
VTL -100 mV 4
Interface Threshold Voltage
Common Input
VCIM 1.10 1.25 1.40 V 4
Voltage
Input High Threshold VIH
2.4 3.3 Vdc
CMOS Voltage (High)
Interface Input Low Threshold VIL
0 0.7 Vdc
Voltage (Low)

Backlight Power Consumption PDDB 60 Watt
Life Time 50,000 60,000 Hours 5,6,7

Note :
1. The ripple voltage should be controlled under 10% of VCC
2. Vcc=12.0V, f v = 60Hz, fCLK=81.5Mhz , 25 , Test Pattern : White Pattern
3. Measurement condition :

Copyright AU Optronics, Inc.
March, 2009 All Rights Reserved. T260XW02 VT - Spec. Ver0.0
6/29
No Reproduction and Redistribution Allowed
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com

4. VCIM = 1.2V

VTH
VCIM
VTL

5. The performance of the Lamp in LCD panel, for example life time or brightness, is extremely influenced by the
characteristics of the DC-AC Inverter. So all the parameters of an inverter should be carefully designed as not
to produce too much leakage current from high-voltage output of the inverter. When you design or order the
inverter, please make sure unwanted lighting caused by the mismatch of the lamp and the inverter (no lighting,
flicker, etc) never occurs. After confirmation, the LCD panel should be operated in the same condition as
installed in your instrument.
6. The relative humidity must not exceed 80% non-condensing at temperatures of 40 or less. At temperatures
greater than 40 , the wet bulb temperature must not exceed 39 . When operate at low temperatures, the
brightness of CCFL will drop and the life time of CCFL will be reduced.
7. Specified values are for a single lamp only which is aligned horizontally. The lifetime is defined as the time
which luminance of the lamp is 50% compared to its original value.
[Operating condition: Continuous operating at Ta = 25

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo