Service Manuals, User Guides, Schematic Diagrams or docs for : . Various LCD Panels Panel_CPT_CLAA185WA03L_0_[DS]
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
![Panel_CPT_CLAA185WA03L_0_[DS]](/pics/5c8ed999905b1.gif)
>> Download Panel_CPT_CLAA185WA03L_0_[DS] documenatation <<
Text preview - extract from the document
Chunghwa Picture Tubes, Ltd.
Technical Specification
To : Qisda (Dell IN1920)
Date : 2010/8/09
CPT TFT-LCD
CLAA 185WA03 L
(AL7, AN8)
ACCEPTED BY
APPROVED BY CHECKED BY PREPARED BY
General Design
Kevin Chen Edward Lee Division
VD Business Unit
Prepared by : General Design Division VD Business Unit
CHUNGHWA PICTUER TUBES, LTD.
No. 1, Huaying Rd., Sanho Tsun, Lungtan Shiang, Taoyuan, Taiwan, 325, R.O.C.
TEL: +886-3-4805678 FAX: +886-3-4800589
Doc. No: CLAA185WA03 L_V2-Qisda-20100629 Issue Date: 2010/08/09
CPT CHUNGHWA PICTURES TUBES, LTD.,
Modification Record List
NO. Issue Date Modification Index
1 2010/5/26 Tentative version 1 for customer
2 2010/6/29 To update RGB Color Coordinate data in page 19.
3 2010/8/9 To edit page 11, in timing specifications table, vertical blank time 32->52.
CPT Confidential 2/25 CLAA185WA03 L-V2-Qisda-20100809
CPT CHUNGHWA PICTURES TUBES, LTD.,
Table Of Content
NO Table of Content Note
1 OVERVIEW 4
2 ABSOLUTE MAXIMUM RATINGS 5
3 ELECTRICAL CHARACTERISTICS 6
4 INTERFACE PIN CONNECTION 11
5 INTERFACE TIMING 12
6 BLOCK DIAGRAM 16
7 MECHANICAL SPECIFICATION 17
8 OPTICAL CHARACTERISTICS 19
9 RELIABILITY TEST CONDITIONS 22
10 HANDLING PRECAUTIONS FOR TFT-LCD MODULE 23
CPT Confidential 3/25 CLAA185WA03 L-V2-Qisda-20100809
CPT CHUNGHWA PICTURES TUBES, LTD.,
1. OVERVIEW
CLAA185WA03_V2 is 18.51" color TFT-LCD (Thin Film Transistor Liquid Crystal Display) module
composed of LCD panel, driver ICs, control circuit and backlight. By applying 6bit+Hi-FRC digital data,
1366*768, 16.7M-color images are displayed on the 18.51" diagonal screen. Input power voltage is 5.0V
for LCD driving. Inverter for backlight is not included in this module. General specification are
summarized in the following table:
ITEM SPECIFICATION
Display Area(mm) 409.8(H)x230.4(V)
Number of Pixels 1366(H)x768(V)
Pixel Pitch(mm) 0.3(H)x0.3 (V)
Color Pixel Arrangement RGB vertical stripe
Display Mode normally white, TN
Number of Colors 16.7M(6 Bit+Hi-FRC)
Brightness(cd/m^2) 250 cd/m2(Typ.) (Center point, Lamp current=7.5 mA)
Viewing Angle 160 / 160
Anti-glare(3H)
Surface Treatment
Hard coating(3H)
Power consumption(W) 14.5(typ)
Module Size(mm) 430.37(W)x254.6(H)x16.5(D)
Module Weight(g) 2000(typ)
Backlight Unit CCFL, 2 tables, edge-light(top*1/bottom*1)
CPT Confidential 4/25 CLAA185WA03 L-V2-Qisda-20100809
CPT CHUNGHWA PICTURES TUBES, LTD.,
2. ABSOLUTE MAXIMUM RATINGS
ITEM SYMBOL MIN. MAX. UNIT REMARK
Power Supply Voltage for LCD VCC 0 6 V
715 830 Delta
Lamp Voltage VL Vrms
730 890 STI
Lamp Current ILO 3 8 mArms *4). 7)
Lamp Frequency FL 40 80 kHz
static electricity VESDt -200 200 V
*5)
VESDc -8000 8000 V
Operation Temperature Top 0 50 *1). 2). 3). 6)
Storage Temperature Tstg -20 60 *1). 2). 3)
Delayed Discharge Time TD -- 1 sec *8)
[Note]
1).The relative temperature and humidity range are as below sketch, 90%RHMax.(Ta40).
2).The maximum wet bulb temperature 39(Ta40) and without dewing.
3).If you use the product in a environment which over the definition of temperature and humidity
too long to effect the result of eye-aching.
4).The life time of the lamp is related to the current of the lamp, so please according to the
description of the "(2) backlight" on page 8.
5).Test Condition: IEC 1000-4-2
VESDt: Contact discharge to input connector; VESDC: Contact discharge to module
6).If you operate the product in normal temperature range, the center surface of panel should be
under 60.
7).When lamp current is out of the absolute maximum range, the life will fall rapidly or shown
unusual sign.
IL min 2mA only for test only, but we can't guarantee the lifetime and performance.
8).Delay lighting testing needs the volt above start voltage Vrms. Before the procedure tube needs
typical lighting for 1 minute and stay in the temperature 25◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo