Service Manuals, User Guides, Schematic Diagrams or docs for : . Various LCD Panels Panel_IDTech_IAQX10M_0_[DS]
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
![Panel_IDTech_IAQX10M_0_[DS]](/pics/5c8eddb150640.gif)
>> Download Panel_IDTech_IAQX10M_0_[DS] documenatation <<
Text preview - extract from the document
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
Engineering Specification
Type 15.0 QXGA Color TFT/LCD Module
Model Name:IAQX10M
Document Control Number : OEM I-910M-03
Note:Specification is subject to change without notice. Consequently it is better to contact to
International Display Technology before proceeding with the design
of your product incorporating this module.
Sales Support
International Display Technology
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 1/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
i Contents
i Contents
ii Record of Revision
1.0 Handling Precautions
2.0 General Description
2.1 Characteristics
2.2 Functional Block Diagram
3.0 Absolute Maximum Ratings
4.0 Optical Characteristics
5.0 Signal Interface
5.1 Connectors
5.2 Interface Signal Connector
5.3 Interface Signal Description
5.4 Interface Signal Electrical Characteristics
5.4.1 Signal Electrical Characteristics for LVDS Receiver
5.4.2 LVDS Receiver Internal Circuit
5.4.3 Recommended Guidelines for Motherboard PCB Design and Cable Selection
5.5 Signal for Lamp connector
6.0 Pixel format image
7.0 Parameter guide line for CFL Inverter
8.0 Interface Timings
8.1 Timing Characteristics
8.2 Timing Definition
9.0 Power Consumption
10.0 Power ON/OFF Sequence
11.0 Mechanical Characteristics
12.0 National Test Lab Requirement
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 2/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
ii Record of Revision
Date Document Page Summary
Revision
November 13,2001 OEM I-910M-01 All First Edition for customer.
Based on Internal Spec. EC H31229 as of November
9,2001.
March 12,2002 OEM I-910M-02 Based on Internal Spec. EC H31230 as of February
20,2002.
4 To update Handling Precautions.
6 To update following items.
Weight
Physical Size
White Luminance
Power Consumption (VDD Line)
Lamp Power Consumption
To add Note for Temperature Range.
7 To eliminate Optional part in the diagram.
9 To update following items.
Max. value of Response Time
Color Chromaticity
White Luminance (ICFL)
11 To update Interface Signal Connector.
12,13 To update Interface Signal Description.
14-18 To update Signal Electrical Characteristics for LVDS
Receiver.
19 To add Recommended Guidelines for Motherboard PCB
Design and Cable Selection.
22 To update Parameter guide line for CFL Inverter.
26 To update Typ. value of Power Consumption.
28,29 To update Reference Drawings.
June 17,2002 OEM I-910M-03 Based on Internal Spec. EC H31231 as of May 10,2002.
4 To update Handling Precautions.
13 To update Electrical Characteristics.
15 To update Switching Characteristics.
22 To delete 5.0[mA] lamp condition.
24 To update Timing Characteristics.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 3/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
1.0 Handling Precautions
O If any signals or power lines deviate from the power on/off sequence, it may cause shorten the life of the
LCD module.
O The LCD panel and the CFL are made of glass and may break or crack if dropped on a hard surface, so
please handle them with care.
O CMOS-ICs are included in the LCD panel. They should be handled with care, to prevent electrostatic
discharge.
O Do not press the reflector sheet at the back of the LCD module to any directions.
O Do not stick the adhesive tape on the reflector sheet at the back of the LCD module.
O Please handle care when mount in the system cover. Mechanical damage for lamp cable and for lamp
connector may cause safety problems.
O Small amount of materials having no flammability grade is used in the LCD module. The LCD module
should be supplied by power complied with requirements of Limited Power Source (2.5, IEC60950 or
UL60950), or be applied exemption conditions of flammability requirements (4.7.3.4, IEC60950 or
UL60950) in an end product.
O The LCD module is designed so that the CFL in it is supplied by Limited Current Circuit (2.4, IEC60950 or
UL1950).
O The fluorescent lamp in the liquid crystal display(LCD) contains mercury. Do not put it in trash that is
disposed of in landfills. Dispose of it as required by local ordinances or regulations.
O Never apply detergent or other liquid directly to the screen.
O Wipe off water drop immediately. Long contact with water may cause discoloration or spots.
O When the panel surface is soiled, wipe it with absorbent cotton or other soft cloth; do not use solvents or
abrasives.
O Do not touch the front screen surface in your system, even bezel.
O The information contained herein is presented only as a guide for the applications of our
products. No responsibility is assumed by International Display Technology for any
infringements of patents or other right of the third partied which may result from its use. No
license is granted by implication or otherwise under any patent or patent rights of International
Display Technology or others.
O The information contained herein may be changed without prior notice. It is therefore
advisable to contact International Display Technology before proceeding with the design of
equipment incorporationg this product.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 4/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
2.0 General Description
This specification applies to the Type 15.0 Color TFT/LCD Module 'IAQX10M'.
This module is designed for a display unit of a monitor application.
The screen format and electrical interface are intended to support the QXGA(2048(H) x 1536(V)) screen.
Support color is native 262K colors(RGB 6-bit data driver).
All input signals are LVDS(Low Voltage Differential Signaling) interface compatible.
This module does not contain an inverter card for backlight.
2.1 Characteristics
The following items are characteristics summary on the table under 25 degree C condition:
CHARACTERISTICS ITEMS SPECIFICATIONS
Screen Diagonal [mm] 380
Pixels H x V 2048(x3) x 1536
Active Area [mm] 304.1(H) x 228.1(V)
Pixel Pitch [mm] 0.1485(per one triad) x 0.1485
Pixel Arrangement R,G,B Vertical Stripe
Weight [grams] 1065 Typ., 1100 Max.
Physical Size [mm] 326.0(W) x 244.5(H) x 13.0(D) Typ./13.3(D) Max.
Display Mode Normally Black
Support Color Native 262K colors(RGB 6-bit data driver)
White Luminance [cd/m 2] 200 Typ. (center)
ICFL=7.0mA 180 Typ. (5 points average)
Contrast Ratio 400 : 1 Typ.
Optical Rise Time + Fall Time [msec] 60 Typ.
Nominal Input Voltage VDD [Volt] +3.3 Typ.
Power Consumption [Watt](VDD Line) 4.1 Typ., 5.2 Max.
Lamp Power Consumption [Watt]
8.6 Typ. (W/o inverter loss)
ICFL=7.0mA
Electrical Interface 8 pairs LVDS(Even/Odd R/G/B Data(6bit), 3sync signals, Clock)
Temperature Range [degree C]
Operating 0 to +50 (Note)
Storage (Shipping) -20 to +60
Note : Max. Operating Temperature 50 degree C in the Spec means the temperature measured for the
point of the front surface of the LCD glass cell.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 5/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
2.2 Functional Block Diagram
The following diagram shows the functional block of this Type 15.0 Color TFT/LCD Module.
The first LVDS port transmits even pixels while the second LVDS port transmits odd pixels.
X-Driver
Y-Driver
< 8 pairs LVDS > LCD DRIVE
CARD
6bit color data
for R/G/B
(even/odd)
EVEN
PIXEL LCD TFT ARRAY/CELL
Controller
DTCLK(even/odd)
ODD
PIXEL
2048(R/G/B) x 1536
DSPTMG
Dual LVDS
Vsync RECEIVER
Hsync
G/A
DC-DC
Converter Backlight Unit
Ref circuit
VDD
Lamp Connectors
GND
JST BHSR-02VS-1 (2pin) x 2
LCD-DRIVE Connector
JAE FI-XB30S-HF10 (30pin)
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 6/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
3.0 Absolute Maximum Ratings
Absolute maximum ratings of the module is as follows :
Item Symbol Min Max Unit Conditions
Logic/LCD Drive Voltage VDD -0.3 +4.0 V
Input Voltage on FlatLink pins - -0.3 +2.6 V
Input Signal Voltage on all other pins VIN -0.3 VDD+0.3 V
CFL Ignition Voltage Vs - +1,600 Vrms (Note 2)
CFL Current ICFL - +8.5 mAms
CFL Peak Inrush Current ICFLP - +20 mA
Operating Temperature TOP 0 +50 deg.C (Note 1)
Operating Relative Humidity HOP 8 95 %RH (Note 1)
Storage Temperature TST -20 +60 deg.C (Note 1)
Storage Relative Humidity HST 5 95 %RH (Note 1)
Vibration 1.5 10-200 G Hz
Shock 50 18 G ms Rectangle wave
Note 1 : Maximum Wet-Bulb should be 39 degree C and No condensation.
Note 2 : Duration : 50msec Max. Ta=0 degree C
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 7/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
4.0 Optical Characteristics
The optical characteristics are measured under stable conditions as follows under 25 degree C condition:
Item Conditions Specification
Typ. Note
Viewing Angle Horizontal (Right) 85 -
(Degrees) K}10 (Left) 85 -
Vertical (Upper) 85 -
K:Contrast Ratio K}10 (Lower) 85 -
Contrast ratio 400 -
Response Time Rising 30 60 Max.
(ms) Falling 30 60 Max.
Color Red x 0.569 -
Chromaticity Red y 0.332 -
(CIE) Green x 0.312 -
Green y 0.544 -
Blue x 0.149 -
Blue y 0.132 -
White x 0.313 -
White y 0.329 -
White Luminance (cd/m2) 200 Typ.
ICFL 7.0 mA (Center)
180 Typ.
(5 points average)
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 8/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
5.0 Signal Interface
5.1 Connectors
Physical interface is described as for the connector on module.
These connectors are capable of accommodating the following signals and will be following components.
Connector Name / Designation For Signal Connector
Manufacturer JAE
Type / Part Number FI-XB30S-HF10
Mating Receptacle Manufacture JAE
Mating Receptacle/Part Number FI-X30M
Connector Name / Designation For Lamp Connector
Manufacturer JST
Type / Part Number BHSR-02VS-1
Mating Type / Part Number SM02B-BHSS-1
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 9/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
5.2 Interface Signal Connector
Signal Connector Pin Assignment
Pin # Signal Name Pin # Signal Name
1 GND 16 GND
2 VDD 17 ReCLKIN-
3 VDD 18 ReCLKIN+
4 Reserved (Note 1) 19 GND
5 Reserved (Note 1) 20 RoIN0-
6 VDD 21 RoIN0+
7 VDD 22 GND
8 ReIN0- 23 RoIN1-
9 ReIN0+ 24 RoIN1+
10 GND 25 GND
11 ReIN1- 26 RoIN2-
12 ReIN1+ 27 RoIN2+
13 GND 28 GND
14 ReIN2- 29 RoCLKIN-
15 ReIN2+ 30 RoCLKIN+
Note :
1. 'Reserved' pins are not allowed to connect any other line.
2. Voltage levels of all input signals are LVDS compatible (except VDD). Refer to "Signal Electrical
Characteristics for LVDS", for voltage levels of all input signals.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 10/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
5.3 Interface Signal Description
The module uses a pair of LVDS receiver SN75LVDS86(Texas Instruments) compatible. LVDS is a differential
signal technology for LCD interface and high speed data transfer device. Transmitter shall be SN75LVDS84/85
or compatible.
PIN # SIGNAL Description
NAME
1 GND Ground
2 VDD +3.3V Power Supply
3 VDD +3.3V Power Supply
4 Reserved Reserved
5 Reserved Reserved
6 VDD +3.3V Power Supply
7 VDD +3.3V Power Supply
8 ReIN0- Negative LVDS differential data input (Even R0-R5, G0)
9 ReIN0+ Positive LVDS differential data input (Even R0-R5, G0)
10 GND Ground
11 ReIN1- Negative LVDS differential data input (Even G1-G5, B0-B1)
12 ReIN1+ Positive LVDS differential data input (Even G1-G5, B0-B1)
13 GND Ground
14 ReIN2- Negative LVDS differential data input (Even B2-B5, HSYNC, VSYNC, DSPTMG)
15 ReIN2+ Positive LVDS differential data input (Even B2-B5, HSYNC, VSYNC, DSPTMG)
16 GND Ground
17 ReCLKIN- Negative LVDS differential clock input (Even)
18 ReCLKIN+ Positive LVDS differential clock input (Even)
19 GND Ground
20 RoIN0- Negative LVDS differential data input (Odd R0-R5, G0)
21 RoIN0+ Positive LVDS differential data input (Odd R0-R5, G0)
22 GND Ground
23 RoIN1- Negative LVDS differential data input (Odd G1-G5, B0-B1)
24 RoIN1+ Positive LVDS differential data input (Odd G1-G5, B0-B1)
25 GND Ground
26 RoIN2- Negative LVDS differential data input (Odd B2-B5)
27 RoIN2+ Positive LVDS differential data input (Odd B2-B5)
28 GND Ground
29 RoCLKIN- Negative LVDS differential clock input (Odd)
30 RoCLKIN+ Positive LVDS differential clock input (Odd)
Note :
1. Input signals of odd and even clock shall be the same timing.
2. The module uses a 100ohm resistor between positive and negative data lines of each receiver input.
3. Even: First Pixel , Odd: Second Pixel
4. 'Reserved' pins are not allowed to connect any other line.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 11/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
SIGNAL NAME Description
+RED 5 (ER5/OR5) RED Data 5 (MSB)
+RED 4 (ER4/OR4) RED Data 4
+RED 3 (ER3/OR3) RED Data 3
+RED 2 (ER2/OR2) RED Data 2
+RED 1 (ER1/OR1) RED Data 1
+RED 0 (ER0/OR0) RED Data 0 (LSB)
(EVEN/ODD)
Red-pixel Data: Each red pixel's brightness data consists of these 6 bits pixel data.
+GREEN 5 (EG5/OG5) GREEN Data 5 (MSB)
+GREEN 4 (EG4/OG4) GREEN Data 4
+GREEN 3 (EG3/OG3) GREEN Data 3
+GREEN 2 (EG2/OG2) GREEN Data 2
+GREEN 1 (EG1/OG1) GREEN Data 1
+GREEN 0 (EG0/OG0) GREEN Data 0 (LSB)
(EVEN/ODD)
Green-pixel Data: Each green pixel's brightness data consists of these 6 bits pixel
data.
+BLUE 5 (EB5/OB5) BLUE Data 5 (MSB)
+BLUE 4 (EB4/OB4) BLUE Data 4
+BLUE 3 (EB3/OB3) BLUE Data 3
+BLUE 2 (EB2/OB2) BLUE Data 2
+BLUE 1 (EB1/OB1) BLUE Data 1
+BLUE 0 (EB0/OB0) BLUE Data 0 (LSB)
(EVEN/ODD)
Blue-pixel Data: Each blue pixel's brightness data consists of these 6 bits pixel
data.
DTCLK Data Clock: The typical frequency is 82.125MHz.
(EVEN/ODD) The signal is used to strobe the pixel +data and the +DSPTMG
+DSPTMG (DSP) When the signal is high, the pixel data shall be valid to be displayed.
VSYNC (V-S) Vertical Sync: This signal is synchronized with DTCLK. Both active high/low signals
are acceptable.
HSYNC (H-S) Horizontal Sync: This signal is synchronized with DTCLK. Both active high/low
signals are acceptable.
VDD Power Supply
GND Ground
Note : Output signals from any system shall be Hi-Z state when VDD is off.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 12/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
5.4 Interface Signal Electrical Characteristics
5.4.1 Signal Electrical Characteristics for LVDS Receiver
Each signal characteristics are as follows;
Electrical Characteristics
Parameter Symbol Min Max unit Conditions
Differential Input High Threshold Vth +100 [mV] Vcm=+1.2V
Differential Input Low Threshold Vtl -100 [mV] Vcm=+1.2V
Magnitude Differential Input Voltage |Vid| 100 600 [mV]
| Vid | | Vid | [V] Vth-Vtl=200mV
Common Mode Input Voltage Vic 0.6 + 2.0 -
2 2
Common Mode Voltage Offset Vcm -50 +50 [mV] Vth-Vtl=200mV
Note:
O Input signals shall be low or Hi-Z state when VDD is off.
O All electrical characteristics for LVDS signal are defined and shall be measured at the interface connector
of LCD (see Figure Measurement system).
Figure. Voltage Definitions
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 13/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
Figure. Measurement system
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 14/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
Switching Characteristics
Parameter Symbol Min Typ Max Unit Conditions
Clock Frequency fc 50.0 82.125 86.6 MHz
Cycle Time tc 11.5 12.2 20.0 ns
Data Setup Time (Note 2) Tsu 500 ps fc = 82.125MHz,
tCCJ < 50ps,
Data Hold Time (Note 2) Thd 500 ps Vth-Vtl=200mV,
Vcm=1.2V,
Vcm=0
Cycle-to-cycle jitter (Note 3) tCCJ -150 +150 ps fc = 82.125MHz
Cycle Modulation Rate(Note 4) tCJavg 20 ps/clk fc = 82.125MHz
Skew Time between ReCLKIN Tskeoclk tc/7 ns fc = 82.125MHz
and RoCLKIN
LVDS Input Data Position 1 tLIDP1 -500 0 500 ps fc = 82.125MHz
(Note 5)
LVDS Input Data Position 2 tLIDP0 tc/7-500 tc/7 tc/7+500 ps
LVDS Input Data Position 3 tLIDP6 2tc/7-500 2tc/7 2tc/7+500 ps
LVDS Input Data Position 4 tLIDP5 3tc/7-500 3tc/7 3tc/7+500 ps
LVDS Input Data Position 5 tLIDP4 4tc/7-500 4tc/7 4tc/7+500 ps
LVDS Input Data Position 6 tLIDP3 5tc/7-500 5tc/7 5tc/7+500 ps
LVDS Input Data Position 7 tLIDP2 6tc/7-500 6tc/7 6tc/7+500 ps
Note :
1. All values are at VDD=3.3V, Ta=25 degree C.
2. See figure "Timing Definition" and "Timing Definition(detail A)" for definition.
3. Jitter is the magnitude of the change in input clock period.
4. This specification defines maximum average cycle modulation rate in peak-to-peak transition within any
100 clock cycles.
This specification is applied only if input clock peak jitter within any 100 clock cycles is greater than
300ps.
5. See figure "LVDS input Data Position".
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 15/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
Figure. Timing Definition (Even Port)
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 16/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
Figure. Timming Definition (Odd Port)
5
Figure. LVDS Input Data Position
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 17/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
Figure. Timing Definition (detail A)
Note : Tsu and Thd are internal data sampling window of receiver. Trskm is the system skew margin; i.e., the
sum of cable skew, source clock jitter, and other inter-symbol interference, shall be less than Trskm.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 18/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
5.4.2 LVDS Receiver Internal Circuit
Below figure shows the internal block diagram of the LVDS receiver.
5.4.3 Recommended Guidelines for Motherboard PCB Design and Cable Selection
Following the suggestions below will help to achieve optimal results.
O Use controlled impedance media for LVDS signals. They should have a matched differential impedance of
100ohm.
O Match electrical lengths between traces to minimize signal skew.
O Isolate TTL signals from LVDS signals.
O For cables, twisted pair, twinax, or flex circuit with close coupled differential traces are recommended.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 19/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
5.5 Signal for Lamp Connector
Pin # Signal Name
1 Lamp High Voltage
2 Lamp Low Voltage
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 20/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
6.0 Pixel format image
Following figure shows the relationship of the input signals and LCD pixel format image. Even and odd pair of
RGB data are sampled at a time.
Even Odd Even Odd
0 1 2046 2047
1st Line R G B R G B R G B R G B
1536th Line R G B R G B R G B R G B
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 21/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
7.0 Parameter guide line for CFL Inverter
PARAMETER MIN TYP MAX UNITS CONDITION
White Luminance
- 180 - cd/m2 (Ta=25 deg.C)
(5 points average)
CFL current(ICFL) 3.0 7.0 7.5 mArms (Ta=25 deg.C)
(Ta=25 deg.C)
CFL Frequency(FCFL) 40 60 KHz
(Note 1)
(Ta= 0 deg.C)
CFL Ignition Voltage(Vs) 1,500 - - Vrms
(Note 3)
(Ta=25 deg.C)
CFL Voltage (Reference)(VCFL) - 620 - Vrms
(Note 2)
(Ta=25 deg.C)
CFL Power consumption(PCFL) - 8.6 9.5 W
(Note 2)
Note 1: CFL discharge frequency should be carefully determined to avoid interference between inverter and TFT
LCD.
Note 2: Calculated value for reference (ICFL x VCFL = PCFL).
Note 3: CFL inverter should be able to give out a power that has a generating capacity of over 1,500 voltage.
Lamp units need 1,500 voltage minimum for ignition.
Note 4:
O All of characteristics listed are measured under the condition using the Test inverter.
O In case of using an inverter other than listed, it is recommended to check the inverter carefully.
Sometimes, interfering noise stripes appear on the screen, and substandard luminance or flicker at low
power may happen.
O In designing an inverter, it is suggested to check safety circuit very carefully.
Impedance of CFL, for instance, becomes more than 1 [M ohm] when CFL is damaged.
O Generally, CFL has some amount of delay time after applying kick-off voltage. It is recommended to
keep on applying kick-off voltage for 1 [Sec] until discharge.
O Reducing CFL current increases CFL discharge voltage and generally increases CFL discharge
frequency. So all the parameters of an inverter should be carefully designed so as not to produce too
much leakage current from high-voltage output of the inverter.
O It should be employed the inverter which has 'Duty Dimming', if ICFL is less than 4.0[mA].
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 22/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
The following chart is CFL current versus the luminance for your reference.
TBD
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 23/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
8.0 Interface Timings
Basically, interface timings described here is not actual input timing of LCD module but output timing of
SN75LVDS86(Texas Instruments) or equivalent.
8.1 Timing Characteristics
Signal Item Symbol MIN. TYP. MAX. Unit
DTCLK Freqency Fdck 50 82.125 86.6 [MHz]
Tck 11.547 12.177 20.000 [ns]
+V-Sync Frame Rate Fv - 49.266 - [Hz]
Tv - 20.3 - [ms]
Nv 1542 1555 1662 [lines]
V-Active Level Tva - 13.1 - [us]
Nva 1 1 124 [lines]
V-Back Porch Nvb 1 1 124 [lines]
V-Front Porch Nvf 1 17 124 [lines]
+DSPTMG V-Line m 1536 [lines]
+H-Sync Scan Rate Fh - 76.6 - [KHz]
Th - 13.1 - [us]
Nh 1064 1072 1407 [Tck]
H-Active Level Tha 0.097 [us]
Nha 1 8 381 [Tck]
H-Back Porch Thb 1 32 381 [Tck]
H-Front Porch Thf 1 8 381 [Tck]
+DSPTMG Display Thd 12.469 [us]
+DATA Data Even/Odd n 2048 [dots]
Note :
O Both positive Hsync and positive Vsync polarity is recommended
O When there are invalid timing, Display appears black pattern.
Synchronous Signal Defects and enter Auto Refresh for LCD Module Protection Mode.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 24/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
8.2 Timing Definition
Vertical Timing
Support mode Tvblk m Tvf VSYNC Tv,Nv Tva Tvb
Vertical Active Field Front Porch Frame VSYNC VSYNC
Blanking Time Width Back Porch
2048 x 1536 at 50Hz 0.248 ms 20.050 ms 0.222 ms 20.298 ms 0.013 ms 0.013 ms
(H line rate : 13.1 us) (19 lines) (1536 lines) (17 lines) (1555 lines) (1 line) (1 line)
DSPTMG
Tv
Tvblk m
Tvf Tva Tvb
-VSYNC
+VSYNC
Horizontal Timing
Thblk Thd Thf Th,Nh Tha Thb
Support mode
Horizontal Active Field HSYNC H Line HSYNC HSYNC
Blanking Front Porch Time Width Back Porch
2048 x 1536
0.584 us 12.469 us 0.097 us 13.053 us 0.097 us 0.390 us
Dotclock : 164.250
(96 dots) (2048 dots) (16 dots) (2144 dots) (16 dots) (64 dots)
MHz (82.125MHz x2)
DSPTMG
Th
Thblk Thd
Thf Tha Thb
-HSYNC
+HSYNC
Tck
VIDEO(Even) 0 2 4 n-4 n-2
VIDEO(Odd) 1 3 5 n-3 n-1
DTCLK
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 25/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
9.0 Power Consumption
Input power specifications are as follows;
SYMBOL PARAMETER Min Typ Max UNITS CONDITION
VDD Logic/LCD Drive 3.0 3.3 3.6 V Load Capacitance
Voltage 68uF
PDD VDD Power 5.2 W MAX Pattern
VDD=3.6V
PDD VDD Power 4.1 W All White Pattern
VDD=3.3V
IDD VDD Current 1730 mA MAX Pattern
VDD=3.0V
IDD VDD Current 1240 mA All White Pattern
VDD=3.3V
VDDrp Allowable Logic/LCD 100 mVp-p
Drive Ripple Voltage
VDDns Allowable Logic/LCD 100 mVp-p
Drive Ripple Noise
Note :Max Pattern:2 dot Vertical sub-pixel stripe.
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 26/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
10.0 Power ON/OFF Sequence
VDD power and lamp on/off sequence is as follows. Interface signals are also shown in the chart. Signals from
any system shall be Hi-Z state or low level when VDD is off.
150ms min.
90% 90%
VDD 10% 10%
10%
0V
10ms max. 0 min.
0 min.
90% 90%
Signals 10% 10%
0V
100ms min.
20ms min.
180ms min.
(Recommended).
On
Lamp
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 27/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
11.0 Mechanical Characteristics
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 28/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 29/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
Global LCD Panel Exchange Center www.panelook.com
Engineering Specification
12.0 National Test Lab Requirement
The display module is authorized to Apply the UL Recognized Mark.
Conditions of Acceptability
O This component has been judged on the basis of the required spacings in the Standard for Safety of
Information Technology Equipment, Including Electrical Business Equipment, CAN/CSA C22.2
No.950-00,UL60950, 3rd Edition, IEC 60950 (3rd. Ed.) and EN 60950 (3rd. Ed.), which would cover the
component itself if submitted for Listing.
O CF Lamp circuit for this model should be supplied from Limited Current Circuit.
O The units are supplied by Limited Power Sources.
O The terminals and connectors are suitable for factory wiring only.
O The terminals and connectors have not been evaluated for field wiring.
O A suitable Electrical and Fire enclosure shall be provided.
****** End Of Page ******
(C) Copyright International Display Technology 2001, 2002 All Rights reserved.
June 17,2002 OEM I-910M-03 30/30
One step solution for LCD / PDP / OLED panel application: Datasheet, inventory and accessory! www.panelook.com
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo