Service Manuals, User Guides, Schematic Diagrams or docs for : . Various SM scena Bryston bryston_10b_xo_sch

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
bryston_10b_xo_sch


>> Download bryston_10b_xo_sch documenatation <<

Text preview - extract from the document
BRYSTON SST




      PERFORMANCE DRIVEN
               10 B ELECTRONIC CROSSOVER




Bryston's Model 10B Electronic Crossover combines ideal                   frequencies more suitable to sub-woofer applications and a
signal-handling with an enormously flexible control function.             10B standard which is more applicable to speakers reacquiring
Simple, direct front-panel switches allow any crossover curve             frequency control in the midband and tweeter areas.
to be set instantly, and the signal purity is always maintained.
                                                                          All crossover selections are extremely accurate and repeatable,
The Model 10B features independently selectable crossover                 being implemented with 1% selected metal-film resistors
points for high-pass and low-pass, in case the speaker installation       and polystyrene capacitors. All switches are heavily gold-
requires slightly overlapped, (or slightly staggered), response           plated, for lifetime protection from corrosion. The level-
curves for the drivers. You can also independently select                 controls are precise 1dB increments, also derived from
crossover slope, from 6, 12, or 18dB/Oct., where one driver               gold-plated switches and 1% metal-film resistors. Most
requires raster cutoff than another in the same system.                   important, however, is that the Bryston 10B Crossover uses
                                                                          NO integrated circuits in the signal path. All internal buffer
MODEL 10B LR                                                              and amplification stages are Bryston's exceedingly linear and
The 10B-LR, a fixed f requency plug in Linkwitz-Riley                     superbly quiet discrete op-amp circuitry. This means the
alignment with steep roll off curves of 24 dB/Oct. is                     signal is always maintained as "Audiophile Quality", with
also available.                                                           stability and freedom from noise and distortion unapproached
                                                                          in other crossovers.
The crossover may be used in any of three connections: 2-way
stereo, 3-way mono, and a special configuration, 2-way stereo with        From the point of view of adaptability, flexibility and signal
summed low pass out to allow the use of one sub-woofer. The               integrity, the Bryston 10B Electronic Crossover is the ideal choice
10B is available in two stock versions, a 10B sub incorporating           for the widest range of multi-way speaker installations.




                                                                      1
 10B SWITCHING AND CONNECTIONS




     (B) (C)      (D)      (E) (F) (A)               (G)           (H)             (A) (B) (C)        (D)       (E) (F) (A)




                                 (I)     (J)   (K)     (L)          (K)      (J)        (I)


(A) MUTE SWITCH                                            (F) HIGH PASS FREQUENCY SELECTOR
One each for low pass and high pass filters                12 selectable crossover points
(B) LOW PASS FREQUENCY SELECTOR                            (G) STATUS LEDS
12 selectable crossover points
                                                           (H) POWER SWITCH (PUSH BUTTON)
(C) LOW PASS SLOPE SELECTOR
                                                           (I) INPUT RCA OR XLR (FEMALE)
Sets low pass slope in decibels per octave
(6, 12 or 18dB/Oct.)                                       (J) LOW PASS OUTPUT RCA OR XLR (MALE)

(D) HIGH PASS LEVEL CONTROL                                (K) HIGH PASS OUTPUT RCA OR XLR (MALE)
Sets high pass output level for channel.
                                                           (L) MODE SELECTOR SWITCH
-5dB to + 5dB in 1dB steps.
(E) HIGH PASS SLOPE SELECTOR
Sets high pass slope in decibels per octave
(6, 12 or 18dB/Oct.)

Selectable        70 Hz, 100 Hz, 140 Hz, 200 Hz,           Features              Stereo 2-way
frequencies       300 Hz, 450 Hz, 700 Hz, 1 kHz,                                 Monaural 3-way
10B standard      2 kHz, 3 kHz, 4.5 kHz                                          Stereo 2-way summed low pass
                                                                                 Balanced or unbalanced
Selectable        40 Hz, 50 Hz, 60 Hz, 70 Hz,
frequencies*      80 Hz, 90 Hz, 100 Hz, 200 Hz,                                  Independent high and low pass
10B sub           250 Hz, 300 Hz, 400 Hz, 500 Hz                                 frequency selection

Slope             6/12/18 dB per Oct.                                            



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo