Service Manuals, User Guides, Schematic Diagrams or docs for : . Various SM scena Orban 2200 Manual Section 2

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
2200 Manual Section 2


>> Download 2200 Manual Section 2 documenatation <<

Text preview - extract from the document
OPTIMOD-FM 2200                                                                              INSTALLATION
                                                                                                            2-1

          Section 2
Installation
  page    contents


   2-2    Installation of 2200
   2-7               Figure 2-1: AC Line Cord Wire Standard
   2-9               Figure 2-2: Wiring the 25-pin Remote Control Connector

   2-17   Basic System Setup
   2-27   System Setup Controls
   2-27       I/O CALIB (I/O Calibration)
   2-32       Stereo Encoder (and processing Pre-Emphasis)
   2-34       Remote Interface
   2-35       TEST Mode




                                                CAUTION                                                 pagecontents
                       The installation and servicing instructions in this manual are for
                       use by qualified personnel only. To avoid electric shock, do not
                       perform any servicing other than that contained in the Operating
                       Instructions unless you are qualified to do so. Refer all servicing
                       to qualified service personnel.
2-2   INSTALLATION                                                                            OPTIMOD-FM 2200




                 Installation of 2200

               Allow about 2 hours for installation.
               Installation consists of: (1) unpacking and inspecting the 2200, (2) optional resetting of
               jumpers for 2200 options (composite output impedance, input termination, input sensitiv-
               ity), (3) checking the line voltage setting, fuses and power cord, (4) mounting the 2200 in a
               rack, (5) connecting inputs, outputs and power, (6) setting the GROUND LIFT switch, (7) and
               optional connecting of remote control leads.
               When you have finished installing the 2200, proceed to "System Setup," on page 2-16.

               1. Unpack and inspect.

                 A    If you note obvious physical damage, contact the carrier immediately to make a
                      damage claim. Packed with the 2200 are:
                                1        Operating Manual
                                1        Quick Setup Guide
                                1        Line Cord
                                2        1/ A Replacement Fuses for "U" and "J" Versions
                                           2
                                2        250mA Replacement Fuses for "E" Version
                                1        Orban green screwdriver (Xcelite R3323)
                                1        Booklet: Audio Quality in the FM Plant


                 B    Save all packing materials! If you should ever have to ship the 2200 (e.g., for
                      servicing), it is best to ship it in the original carton with its packing materials because
                      both the carton and packing material have been carefully designed to protect the unit.

                 C    Complete the Registration Card and return it to Orban.                      (please)
                             The Registration Card enables us to inform you of new applications,
                             performance improvements, and service aids that may be developed, and it
                             helps us respond promptly to claims under warranty without our having to
                             request a copy of your bill of sale or other proof of purchase. Please fill in
                             the Registration Card and send it to us today. (The Registration Card is
                             located after the cover page).
                             We do not sell or give away our customer's names to anyone.
OPTIMOD-FM 2200                                                                                 INSTALLATION
                                                                                                               2-3
2. Change standard factory configuration, if required.

     [Skip this step if your installation does not have any special requirements.]

     The 2200 is supplied from the factory with its jumpers set to the configuration correct
     for most installations.
        Stereo Encoder Composite Output Impedance                  0
        Input Impedance                                            10k
        Input Sensitivity                     -10dBu or greater (+5dBu to +27dBu peak)

 A      To change any jumpers you must remove the top cover of the 2200 to access the main
        circuit board. (Make sure power is not connected.) Remove all screws holding the
        cover in place, then lift it off. (Be careful not to strip threads when opening the
        cover.)

 B      Refer to Figure 2-1 to find the jumpers on the main circuit board and to position them
        according to your application.

     The following information is provided to explain each jumper and its settings in detail.

        



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo