Service Manuals, User Guides, Schematic Diagrams or docs for : . Various SM scena Orban 2200 Manual Section 6

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download 2200 Manual Section 6 documenatation <<

Text preview - extract from the document

OPTIMOD-FM 2200                                                 TECHNICAL DATA
                                                                                 6-1

          Section 6
Technical Data
  page    contents


   6-2    Specifications
   6-5    Circuit Description
   6-5        Overview
   6-5        16.384MHz Oscillator and System Clocking
   6-7        Control Circuits
   6-9        User Control Interface and LED Display Circuits
   6-10       L/R Input Circuits
   6-13       L/R Output Circuits
   6-17       Composite Output Circuits
   6-18       DSP Circuits
   6-20       Power Supply

   6-22   Parts List
   6-23       Obtaining Spare Parts
   6-40       Vendor Codes

   6-41   Schematics, Assembly Drawings
   6-57   Abbreviations
6-2   TECHNICAL DATA                                                                      OPTIMOD-FM 2200



                                                                                                                   page
                Specifications

              It is impossible to characterize the listening quality of even the simplest limiter or compres-
              sor on the basis of the usual specifications, because such specifications cannot adequately
              describe the crucial dynamic processes that occur under program conditions. Therefore, the
              only way to meaningfully evaluate the sound of an audio processor is by subjective listening
              tests.
              Certain specifications are presented here to assure the engineer that they are reasonable, to
              help plan the installation, and to help make certain comparisons with other processing
              equipment. Some specifications are for features that are only available on the 2200-D.

              Installation

                 Analog Audio Input
                   Configuration: Left and right.
                   Impedance: Electronically balanced 600 or >10k load impedance, jumper-selectable.
                   Dynamic Range: >90dB.
                   Common Mode Rejection:  70dB at 50-60Hz.  45dB at 60Hz-15kHz.
                   Sensitivity: -20dBu to +20dBu to produce 10dB gain reduction at 1kHz, software- and jumper-
                     adjustable.
                   Maximum Input Level: +27dBu.
                   Connector: XLR-type, female, EMI-suppressed. Pin 1 Chassis Ground, Pins 2 (+) and 3
                     electronically balanced, floating and symmetrical.
                   A/D Conversion: 18-bit.
                   Filtering: RFI-filtered, with high-pass filter at 0.15Hz.

                 Analog Audio Output
                   Configuration: Left and right. Flat or pre-emphasized (at 50

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo