Service Manuals, User Guides, Schematic Diagrams or docs for : MAKITA 4103D-TE

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download 4103D-TE documenatation <<

Text preview - extract from the document

T     ECHNICAL INFORMATION
       Models No.           4103DW
                                                                                                             New Tool


      Description           MAKITA 80 mm Cordless cutter
                                                                                      # 4103D
CONCEPTION AND MAIN APPLICATIONS
   This model comprising the body(#4103D) and the fast
   charger(#DC9000) is developed mainly for use in cutting the
   glass and tile etc., wherein the #5080D is partly reformed and
   the water supply unit is additionally installed.
                                                                           # DC9000
   Developed to further expand the sales volume of the battery
   tool.



  Specifications
   #4103D[Battery cutter body]
                       Voltage(V)                                               Current(A)t
                        DC 9.6 V                                                 DC 10 A

    Motor                                        DC magnet motor
    Battery                                      Battery 9000
    No load speed(/min.)                         1000/min.
    Diamond wheel                                80 in outer dia.x 0.8 in thickness x15 in inner dia.
    Max. cutting depth(mm)                       17 mm
    Machine size                                 304 in length x 155 in width x 270 in height
    Net Weight(kg)                               1.8 kg (Battery included)

   #DC 9000[Fast charger]
        Input voltage           Input frequency (Hz)       Input capacity      Output voltage      Output current
    Single-phase AC 100V                50-60              35 Volt/Ampere        DC 9.6 V            DC 1.5 A

    Charging time(hour)                          1 hour
    Machine size                                 145 in length x 80 in width x 68 in height
    Net Weight(kg)                               1.0 kg
    Cord length(m)                               2m


  Standard equipment
   Diamond wheel 80
   Hex. Wrench
   MAKITA Battery 9000

  Optional accessories
   MAKITA Battery 9000
   Diamond wheel 80

  Features and benefits
   1. The cordless enables to use without power source.
   2. The cartridge type can double the working volume only through installing the spare battery.
   3. The built-in water supply unit allows to operate even at the place where water is not available.
   4. Even the thinner diamond wheel than conventional ones can increase the cutting efficiency.
   5. It can cut up to the 17 mm regardless of the small model.
   6. The diamond wheel stopper pin and the Hex. wrench mounted on the body enable the diamond wheel to
      be loaded/unloaded easily at any place.

 The standard equipment for the tools shown may differ form country to country.
Capacity
Actual cutting test for #4103D
   Material to be cut     Glass
   Thickness to be cut     5 mm
   Cutting current          8 -10A
   Cutting speed           2-min. 35-sec./m
* In the case shown above the diamond wheel can cut up to about 150 m as the service life.
* The curve-cutting and the zigzag cutting are impossible during cutting.

Repair
Handling(Disassembling/assembling included)
   Although the operation methods and the handling ways are almost same as for the #5080D, use special cares for
   the following points.
1) To connect the cap mounted on the edge of the vinyl tube to the port edge of the water supply tank, loosen the
   screw holding the water supply
   tank, connect them while turning
   right the water supply tank.(see                                                   Connect the port edge to the cap
   the right figure)                                                                  while turning the water supply tank
                                                                                        in right direction.
                                        Water supply tank

                                                                                    Loosen the screw.
                                               Cap

                              Vinyl tube

                                                                 Port edge



2) If the vinyl tube has been bent in dogleg-shape or over tightened after assembling, loosen the screw holding the
   tank holder, slide the tank position in left/right or change the angle slightly to modify it.
3) Although the handling methods for the DC 9000 is same as the DC 7000, use the charger for exclusive use in
   DC9000 instead of charger for the DC7000(cannot be used) when charging.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo