Service Manuals, User Guides, Schematic Diagrams or docs for : MAKITA 46217B-ww-1

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.



Image preview - the first page of the document



>> Download 46217B-ww-1 documenatation <<

Text preview - extract from the document

T      ECHNICAL INFORMATION                                                                                        46217

           Subject              Change on rubber ring 26, etc.

           For Models           1805B, 1806B (Power Planer), 4110B, 4110C (Angle Cutter)


           Description          1. The rubber ring 26 will be changed in material and shape as follows.
                                   And a ring will be added to the rubber ring 26 as shown in the figure below.

                                                    Current                                         New
Material                     Chloropren                                      Nitrile
Shape                        Without lip                                     With lip


2. The insulation washer will be changed in shape as shown in the figure below.
3. For 4110B and 4110C only
   The rubber pin 4 (a constituent part of motor housing) will be discontinued.

                         Current                                                             New

                                   Rubber ring 26
     Insulation washer                                                  Insulation washer        Rubber ring 26 with lip




                                     Rubber pin 4                                              Ring will be added to
      Armature shaft                                                  Armature shaft           rubber ring 26
Interchangeability(I/C)
 Item No.        Current part                 Q'ty   I/C       New part                     Q'ty           Note
              Rubber ring 26                    1     => Rubber ring 26
       64                                                                                    1
              421417-8                                   421490-8
       22
              Insulation washer                 1     <= Insulation washer                   1
              681624-7                                   681635-2
              Motor housing                     1        Motor housing                      1
       65                                             No                                            For 4110B and 4110C
              156738-6                                   159687-6


Note
1. Interchangeability mark:
   * => mark indicates that the current type part can be substituted for the new type part.
   * <= mark indicates that the new type part can be suvstituted for the current type part.
2. For 1805B and 1806B only
   * The current type parts (rubber ring 26 and insulation washer) and the new type parts are interchangeable as a set.
3. For 4110B and 4110C only
   * The current type parts (rubber ring 26, insulation washer and motor housing) and the new type parts are interchangeable
     as a set.
   * The new type rubber ring 26 can fit into the current type motor housing if you remove the rubber pin 4 from the motor
     housing and use the new type unsulation washer.

Implementation
 1805B: From serial No. 53201E                  1806B: From serial No. 25719E
 4110B: From the next order                     4110C: From serial No. 10122E

◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo