Service Manuals, User Guides, Schematic Diagrams or docs for : MAKITA DC122-TE

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download DC122-TE documenatation <<

Text preview - extract from the document
T        ECHNICAL INFORMATION                                                                                                 New Tool

          For Models            DC122
          Description           One Hour Charger

Charger for Battery122.                                                                                                       60.5mm(2-3/8")
Charging time for Battery 122 is one hour.
(For Battery 121 two hours.)




                                                                                            Charging time(hr)
          Output voltage(V)              Output Current(A)
                                                                               Battery121                            Battery122
                 DC12                             1.3                               2                                     1

      Even if both Battery/Charger are normal, sometimes the red light may not light.
      If the light does not work for more than 5 minutes after charging, it means a failure of either Battery or Charger.
      Stop charging in such a case, because Charger will be broken too, if you continue using broken Battery.

     Differentiating      of Charger condition
      Measure the voltage between output terminals of Charger with a tester. If you connect it with the nominal voltage source
      and the D.C. voltage of 14.4~16.4V is output, the condition of Charger is normal.
      As for checking Battery, refer to the technical notice of Battery 122.

     Notes    in replacing Inlet
      When connecting Lead wires with Inlet, as shown in the Figure, connect Red wire to the left side and Black wire to the
      right, putting the polar convex in connection cord inserting face downward .

                                        Red lead wire                Black lead wire

                                                    (Polar convex)

◦ Jabse Service Manual Search 2022 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo