Service Manuals, User Guides, Schematic Diagrams or docs for : MAKITA HM1100C-TE

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download HM1100C-TE documenatation <<

Text preview - extract from the document
      Models No.            HM1100C
                                                                                                          New Tool

      Description           Demolition Hammers

CONCEPTION AND MAIN APPLICATIONS                                                         98m
   Model HM1100C is the hammer classed between Model
   HM0810 and Model HM1200, and it's brief benefits are;

   *Less vibration toward hands than competitor's same class
     hammers by improved over all design
   *Reduced operator' s fatigue in cotinuous operation by
    ergonomically designed large handle, well balanced side
     handle and slide switch
   *Easy operation for light hammering by electronical speed
    adjusting dial at lower blows per minute position                                524mm(20-5/8")
   *Adapted for SDS-max type bit Model HM1l00 is the model
     without electronical) speed control feature.

                                                                 Continuous Rating (W)
      Voltage (V)       Current (A)        Cycle (Hz)                                      Max. Output(W)
                                                                Input          Output
          100               11               50/60              1050             450               1050
          115               9.6              50/60              1050             450               1050
          200               5.5              50/60              1050             450               1050
          220                5               50/60              1050             450               1050
          230               4.8              50/60              1050             450               1050
          240               4.6              50/60              1050             450               1050

    Bit-type                                   SDS-max
    Blows per minute          HM1100C          1300-2650(bpm)
                              HM1100           2650(bpm)
    Net Weight                                 6.1Kg(13.5lbs)
    Cold Length                                5m(16.4ft)

   Standard equipment
    Bit Grease Plastic Carrying Case

   Optional accessories
    Hammer Grease

   Features and benefits
    1.Double insulated
    2.See the attached sheets for more information.

The standard equipment for the tools shown may differ form country to country
Chisel or Spade can be
set at 16 different angles.
Bit'angle can be changed with bit in tool holder
by pushing change ring and turning it.

                                                                                          On-off slide switch
                                                                                            suitable for
                                                                                            continuous use

                                                                                             Large handle
                                                                                               . Ergonomic shape
                                                                                               . Switch is removed.
                                                                                               . Large enough
                                                                                                 for both hands
                                                                                                 at stright-down work
                                                                                               . Roundish shape for
                                                                                                 supporting tool by
                                                                                                 other part of the body
                                                                                                 without pain

                                                   D-Side handle
No hammering when idling                           Can be set at any angle                  Speed adjusting dial
 Bit does not jump arround.                        and swiveled at 8 positions              (HM1100C only)
 Efficiency and endurance                          back and forth                            Light hammering is easily
                                                   Ergonomic body shape                     performed by setting at
 are improved.
                                                    Body can be held                        low blows per minute.
                                                    without side handle.

                              Bit can be installed or removed
                              by sliding tool holder cover.
                                                                                 Steady speed + Soft start
                                                                                 (HM1100C only)
                                                                                 Easy to locate bit by
                                                                                 electronical speed control

◦ Jabse Service Manual Search 2024 ◦ Jabse ◦ Other service manual resources online : FixyaeServiceinfo