Service Manuals, User Guides, Schematic Diagrams or docs for : Marconi Marconi_2305_Service_Manual
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download Marconi_2305_Service_Manual documenatation <<
Text preview - extract from the document
TM 11-6625-3146-14
TECHNICAL MANUAL
OPERATOR'S, ORGANIZATIONAL, DIRECT SUPPORT,
AND
GENERAL SUPPORT MAINTENANCE MANUAL
FOR
MODULATION METER
ME-505A/U
(MARCONI INSTRUMENTS, MODEL 2305)
(NSN 6625-01-154-4844)
This copy is a reprint which includes
current pages from Change 1,
HEADQUARTERS, DEPARTMENT OF THE ARMY
DECEMBER 1985
TM 11-6625-3146-14
C1
CHANGE HEADQUARTERS
DEPARTMENT OF THE APRMY
No. 1 Washington DC, 15 June 1987
OPERATORIS, ORGANIZATIONAL, DIRECT SUPPORT
AND GENERAL SUPPORT MAINTENANCE MANUAL
MODULATION METER, ME-505A/U
(MARCONI INSTRUMENTS MODEL 2305)
(NSN 6625-01-154-4844)
TM 11-6625-3146-14, 26 December 1985, is changed as follows:
1. Insert print date of 26 December 1985, on the front cover of the manual.
2. Remove old pages and insert new pages as indicated below. New or changed material is indicated by a vertical bar in
the margin of the page. Added or revised illustrations are indicated by a vertical bar adjacent to the identification number.
Remove Insert
i through iv i through iv
1-3 and 1-4 1-3 and 1-4
1-11 through 1-16 1-11 through 1-16
2-1 and 2-2 2-1 and 2-2
3-1 and 3-2 3-1 and 3-2
3-5 and 3-6 3-5 and 3-6
3-9 and 3-10 3-9 and 3-10
3-17 and 3-18 3-17 and 3-18
3-27 and 3-28 3-27 and 3-28
4-1 and 4-2 4-1 and 4-2
4-7 and 4-8 4-7 and 4-8
4-11 and 4-12 4-11 and 4-12
4-31 through 4-44 4-31 through 4-44
4-47 through 4-52 4-47 through 4-52
5-3 through 5-6 5-3 through 5-6
None 5-6.1/(5-6.2 blank)
5-17 and 5-18 5-17/(5-18 blank)
5-43 and 5-44 5-43 and 5-44
B-5 through B-8 B-5 through B-8
None Figure FO-25
3. File this change sheet in front of the publication for reference purposes.
Distribution authorized to the Department of Defense mnd
DOD contractors only for official use or for administration or
operational purposes. This determination was mode on 17
February 1987. Other requests for this document will be
referred to Commander, US Army Communications-
Electronics Command and Fort Monmouth, ATTN: AMSEIL-
ME-P, Fort Monmouth, NJ 07703-5000.
DESTRUCTION NOTICE-Destroy by any method that will
prevent disclosure of contents or reconstruction of the
document.
By Order of the Secretary of the Army:
JOHN A. WICKHAM, JR.
General, United States Army
Official: Chief of Staff
R.L. DILWORTH
Brigadier General, United States Army
The Adjutant General
DISTRIBUTION:
To be distributed in accordance with DA Form 12-36 literature requirements for ME-505/U.
TM 11-6625-3146-14
A
TM 11-6625-3146-14
WARNING
HIGH VOLTAGE is used in the operation of this equipment. DEATH ON CONTACT
may result if personnel fail to observe safety precautions. Know the areas in this
equipment containing high voltage. Be careful not to come in contact with the high
voltage connections during operation of this equipment.
Do not be misled by the term "Low Voltage." Potentials as low as 25 volts may
cause death under adverse conditions.
WARNING
FLAMMABLE SOLVENTS are used in the maintenance of this equipment. Adequate
ventilation should be provided while using isopropyl alcohol. Prolonged breathing
of the vapor should be avoided. The solvent is not to be used near heat, sparks,
or open flames; it is highly flammable. Since isopropyl alcohol dissolves
natural oils, prolonged contact with skin should be avoided. When necessary, use
gloves which are solvent-resistant. If the solvent is taken internally, consult a
physician immediately.
WARNING
COMPRESSED AIR is used in the maintenance of this equipment. When used for
cleaning, the compressed' air source must limit nozzle pressure to no more than
29 pounds per square inch (PSIG). Goggles must be worn when cleaning with
compressed air.
WARNING
Adequate ventilation should be provided while using
TRICHLOROTRIFLUOROETHANE. Prolonged breathing of vapor should be
avoided. The solvent should not be used near heat or open flame; the products of
decomposition are toxic and irritating. Since TRICHLOROTRIFLUOROETHANE
dissolves natural oils, prolonged contact with skin should be avoided. When
necessary, use gloves which the solvent cannot penetrate. If the solvent is taken
internally, consult a physician immediately.
WARNING
TOXIC HAZARD: Many of the electronic components used in this equipment
employ resins and other chemicals which give off toxic fumes on incineration.
Appropriate precautions should therefore be taken in the disposal of these items.
B
TM 11-6625-3146-14
ESD
CLASS 1
NOTE
The symbol for static sensitive devices in military inventory is as depicted in the caution block above. The symbol used in
this authenticated manual is
GENERAL HANDLING PROCEDURES FOR ESDS ITEMS
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo