Service Manuals, User Guides, Schematic Diagrams or docs for : Minolta Copiers CF3101 LINKFILE PMListE
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download PMListE documenatation <<
Text preview - extract from the document
Maintenance Schedule
To ensure that the copier produces the good quality copies and to extend its service visit
intervals, it is recommended that the maintenance jobs described in this schedule be
carried out as instructed.
PM Parts Maintenance Intervals (K=1000 Copies)
Clean Replace
Paper Paper Take-Up Roll Whenever paper 200 K
Take-Up misfeed has
Section occurred
Separator Roll Assy Whenever paper 200 K
msfeed has
occurred
Vertical Synchronizing Roller Upon call (60K) -
Transport Paper Dust Remover Upon call (60K) 152 K
Section Transport Roller Upon call (60K) -
Pre 2nd Image Transfer Guide Upon call (60K) -
Plate
Transfer Roller Unit - 152 K
IR Section Scanner Rail Whenever the -
image quality
problem has
occurred
Mirrors (1st, 2nd, and 3rd) Whenever the -
image quality
problem has
occurred
Lens Whenever the -
image quality
problem has
occurred
Original Glass Whenever the -
image quality
problem has
occurred
CCD Sensor Whenever the -
image quality
problem has
occurred
Image Transfer Belt Unit - 160 K
Transfer Waste Toner Bottle - 30 K
Section Around waste toner Upon call -
collecting port
Developing Imaging Unit C/M/Y - 52 K
Section Imaging Unit Bk - 82 K
Ozone Filter - 152 K
Comb Electrode 10 K or When -
image failure
occurs
LPH LPH Assy Upon call or -
Section whenever each
Imaging Unit is
replaced
Fusing Fusing Unit - 152 K
Section Fusing Entrance Guide Plate Whenever paper -
jam has occurred
Filter - 10 K
Notes
1) Be sure to replace the Paper Take-Up Roll and Separator Roll Assy with the new one
at the same time.
2) Be sure to replace the Paper Dust Remover and Ozone Filter with the new one at the
same time.
3) Be sure to replace the Bk Toner Cartridge and the Filter (contained in the package of
the Black Toner Cartridge ) with the new one at the same time.
4) When the Toner Cartridge is replaced, also clean the Comb Electrode.
5) Numerical values for the maintenance intervals are those for the life counter.
6) Contents of the above maintenance schedule are subject to change without notice.
Guidelines for Life Specifications Values by Unit
Unit Description Life Value Copying/Printi
ng stopped at
Toner An approximate life value is 10 K under the 10K 10K
Cartridge specified conditions.
Waste *1 8020: A waste toner full condition is - 30 K
Toner detected when about 6.9 K copies are made
Bottle after a waste toner near-full condition has
been detected.
*1 8031: A waste toner full condition is
detected when about 3.5 K copies are made
after a waste toner near-full condition has
been detected.
Fusing Unit Number of copies is counted. 150 K 152 K
(2 counts are made for the paper which is
longer than 216mm in the feeding direction)
Paper Dust Number of copies is counted. 150 K 152 K *2
Remover (2 counts are made for the paper which is
longer than 216mm in the feeding direction)
Ozone Number of copies is counted. 150 K 152 K *2
Filter (2 counts are made for the paper which is
longer than 216mm in the feeding direction)
Transfer Number of copies is counted. 150 K 152 K *2
Roller Unit (2 counts are made for the paper which is
longer than 216mm in the feeding direction)
Transfer Number of copies is counted. 150 K 160 K
Belt Unit (2 counts are made for the paper which is
longer than 216mm in the feeding direction)
Number of copies and number of copies
converted from the cumulative Transfer Belt
rotation time being compared, the numerical
life value, whichever comes first, has been
detected. Once the number of copies has
reached its life value, copying is prohibited.
Imaging Cumulative PC Drum rotation time and the 8020: 8020:
Unit (C, M, cumulative PC Drum rotation time converted 6929M 7206M
and Y) from the Developing Roller rotation time (50K) (52 K)
being compared, the numerical life value, 8031: 8031:
whichever comes first, has been detected 3479M 3618M
(50K) (52 K)
Imaging 8020: 8020:
Unit (Bk) 7627M 7818M
(80 K) (82 K)
8031: 8031:
5411M 5546M
(80 K) (82 K)
Notes
*1 Numerical values for the full detection of the waste toner vary according to the ratio of
the number of the monochrome and color copies.
*2 When the number of copies has reached " Copying/Printing Stop conditions ", if
" User" is selected , copying is prohibited and if " Service " is selected , end of life
warning is indicated with the procedure of Tech. Rep Mode->System Input->Unit
Change.
-The life specifications values represent the number of copies made or figures
equivalent to it when given conditions are met. They can be more or less depending
on the copier operating conditions of each individual user.
Copying 8020 8031
Conditions Inch Area Metric Area Inch Area Metric Area
Job Type Color Mode: Making two copies Color Mode: Making three o copies per
per job job
Bk & W: Making three copies per Bk & W: Making three copies per job
job
Paper Size Letter or A4Y
Color Ratio C : Bk=1.5:4.5 C : Bk=6.5:1.5
CV/M 6K 8K
Original B/W=6%
Density Color = 5 % for each color
No. of 20 days (Power Switch turned ON and OFF 20 times per month)
Operating
Days per
Month
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo