Service Manuals, User Guides, Schematic Diagrams or docs for : NOKIA Mobile Phone 6220 05-rh20-disassembly

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.




Image preview - the first page of the document
05-rh20-disassembly


>> Download 05-rh20-disassembly documenatation <<

Text preview - extract from the document
                   Customer Care Solutions
                  RH-20 Series Transceivers




            RH-20 Disassembly and
             Assembly Instructions




Issue 1 10/2003                           Nokia Corporation.
RH-20                     Company confidential
RH-20 Disassembly and Assembly Instructions    CCS Technical Documentation

Table of Contents
                                                                                                                       Page No
  Disassembling RH-20 .................................................................................................... 3
  Assembling RH-20....................................................................................................... 10
  Disassembly and Reassembly Instructions for Camera Module.................................. 17




Page 2                                     Nokia Corporation.                                          Issue 1 10/2003
                                           Company confidential            RH-20
CCS Technical Documentation                  RH-20 Disassembly and Assembly Instruc-


Disassembling RH-20

NOTE! Before you start

- Ensure that you are connected to the ESD wristband

NOTE! While disassembling/assembling the phone

- Use only the specified tools

- Be careful when handling sensitive components

- Avoid touching sensitive spring contacts connectors

- Protect the LCD with a foil whenever possible




1. Place the phone face down, press the Release Key and slide the battery cover downwards.




2. Flip gently the A-cover from down corner. Remove the A-cover.




Issue 1 10/2003                    Nokia Corporation.                                  Page 3
RH-20                     Company confidential
RH-20 Disassembly and Assembly Instructions    CCS Technical Documentation




3. Remove the Keymat.




4. Spread the B-cover from both sides until snaps inside will release it.




5. Remove the B-cover.




Page 4                             Nokia Corporation.                       Issue 1 10/2003
                                          Company confidential            RH-20
CCS Technical Documentation                 RH-20 Disassembly and Assembly Instruc-




6. Remove the antenna

NOTE! Use only a specified opening tool, and be careful not to damage the mechanical parts.

Do not touch the antenna plate inside without gloves.




7. Remove the screws (6pcs) to get the module out from C-cover.




8. Remove the module out from the C-cover.

Note! Always use the specified tools.




Issue 1 10/2003                    Nokia Corporation.                                  Page 5
RH-20                     Company confidential
RH-20 Disassembly and Assembly Instructions    CCS Technical Documentation




9. Remove the UI module from the engine board.




NOTE! The UI module and the engine board are linked together by two board-to-board connec-
tors. Be careful not to damage them.




10. Remove the microphone by pressing it from its edge, or take the tweezers between the frame
and microphone and lift it out from the frame.




Page 6                           Nokia Corporation.                           Issue 1 10/2003
                                             Company confidential            RH-20
CCS Technical Documentation                    RH-20 Disassembly and Assembly Instruc-




11. Remove the speaker by lifting it from the guiding pin.

NOTE! The speaker is attached into the frame by adhesive tape. Therefore, it may not loose easily.




12. To remove the Display shield, open the snaps from both sides by using the specified tool and
remove the shield.

NOTE! Be careful not to damage the shield.




13. To remove the LCD Module, keep it on a table by using soft cloth, and flip the LCD frame gen-
tly until the LCD Module detaches.

NOTE! Be careful not to damage the sensitive parts. Do not press the LCD module.




Issue 1 10/2003                     Nokia Corporation.                                     Page 7
RH-20                     Company confidential
RH-20 Disassembly and Assembly Instructions    CCS Technical Documentation




14. Remove the UI Board from the LCD frame.

NOTE! The UI Board is attached into the frame by adhesive tape. Therefore, it may not loose eas-
ily. Be careful not to damage the LCD Frame.




15. Remove the Volume Key and the Power Key.




16. Remove the Vibra by lifting it out of its place.




Page 8                             Nokia Corporation.                          Issue 1 10/2003
                                            Company confidential            RH-20
CCS Technical Documentation                   RH-20 Disassembly and Assembly Instruc-




17. Remove the DC Jack by lifting it out of its place

NOTE! Be careful not to damage the C-cover.




18. Lift the Release Spring by tweezers from its place




19. Remove the Release Key by pressing the snaps towards the center from inside.

           DISASSEMBLING COMPLETED!




Issue 1 10/2003                     Nokia Corporation.                             Page 9
RH-20                     Company confidential
RH-20 Disassembly and Assembly Instructions    CCS Technical Documentation


Assembling RH-20
                Reassembly takes place in reversed order compared with disassembly.




1. Press the Release Key downright into its place.




2. Put the Release Spring into its place.




3. Put the DC Jack into its place.




Page 10                              Nokia Corporation.                       Issue 1 10/2003
                                             Company confidential            RH-20
CCS Technical Documentation                    RH-20 Disassembly and Assembly Instruc-




4. Put the Vibra into its place.

NOTE! Avoid touching the spring contacts.




5. Put the Volume Key into its place.




6. Put the Power Key into its place.




Issue 1 10/2003                        Nokia Corporation.                       Page 11
RH-20                     Company confidential
RH-20 Disassembly and Assembly Instructions    CCS Technical Documentation




7. Put the Antenna into its place

NOTE! Do not touch the inside of the Antenna plate.




8. Put the UI Board into its place.




9. Place the LCD to the UI Frame.

NOTE! Do not press the LCD as it may damage.




Page 12                               Nokia Corporation.     Issue 1 10/2003
                                            Company confidential            RH-20
CCS Technical Documentation                   RH-20 Disassembly and Assembly Instruc-




10. Fit the Display Shield in its place.

Make sure the shield is properly locked on both sides to the frame.




11. Put the Speaker into the frame so that the guiding pin goes into its place.




12. Put the Microphone into the frame.

NOTE! Do not touch the spring contacts.




Issue 1 10/2003                       Nokia Corporation.                          Page 13
RH-20                     Company confidential
RH-20 Disassembly and Assembly Instructions    CCS Technical Documentation




13. Place the UI Module and the engine together by closing the Display connector.




14. Put the unit into the C-cover.




           1.         3.             5.




          2.          4.             6.


15. Tighten the six screws by using following order.

NOTE! Set 20Ncm/650rpm to your Torque driver before tightening.




Page 14                              Nokia Corporation.                       Issue 1 10/2003
                                              Company confidential            RH-20
CCS Technical Documentation                     RH-20 Disassembly and Assembly Instruc-




16. Place the B-cover into its place. Make sure the snaps on both sides are locked to the module.




17. Place the Keymat into its place.




18. Place the A-cover into its place.




Issue 1 10/2003                         Nokia Corporation.                               Page 15
RH-20                     Company confidential
RH-20 Disassembly and Assembly Instructions    CCS Technical Documentation




19. Slide the Battery cover into its place until the Release Key locks it.




           ASSEMBLING COMPLETED!




Page 16                             Nokia Corporation.                       Issue 1 10/2003
                                                    Company confidential            RH-20
        CCS Technical Documentation                   RH-20 Disassembly and Assembly Instruc-


       Disassembly and Reassembly Instructions for Camera Module




Remove Connector Shield when cleaning contacts or       Camera Module is attached with four snaps into its
changing Camera Module.                                 guidance. Place SRT-10 as shown in the picture and unlock
                                                        the snaps on both sides. Note releasing order.




Remove Camera Module carefully. Take care that Camera   Do not touch contacts and camera lens. Use always
marking shows to right side when assembling.            SRT-10 for assembly and disassembly.




Shift the SRT-10 into the camera groove.                Take the Camera Module carefully and note the marking.




       Issue 1 10/2003                     Nokia Corporation.                                    Page 17
       RH-20                     Company confidential
       RH-20 Disassembly and Assembly Instructions    CCS Technical Documentation




Place Camera Module into its guidance. It is very important   Use SRT-10 to lock Camera Module into its guidance. Note
to take correct position of the Camera Module to avoid        locking order.
destruction of this device.




Put the Connector Shield on the camera guidance and           Check, that Camera Module is clean. When it is necessary
press it down.                                                to clean the Camera lens, use compressed air for this
                                                              procedure only.




       Page 18                               Nokia Corporation.                              Issue 1 10/2003



◦ Jabse Service Manual Search 2024 ◦ Jabse PravopisonTap.bg ◦ Other service manual resources online : FixyaeServiceinfo