Service Manuals, User Guides, Schematic Diagrams or docs for : NOKIA Mobile Phone 8280 8-rh10troubleant
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download 8-rh10troubleant documenatation <<
Text preview - extract from the document
CCS Technical Documentation
RH-10 Series Transceivers
Troubleshooting -- Antenna
Issue 1 09/2002 Confidential Nokia Corporation
RH-10
Troubleshooting -- Antenna CCS Technical Documentation
Page 2 Nokia Corporation Confidential Issue 1 09/2002
RH-10
CCS Technical Documentation Troubleshooting -- Antenna
Contents
Page No
Introduction.................................................................................................................... 5
Failures and Corrective Measures ...............................................................................5
Internal antenna not installed .................................................................................... 5
Wrong internal antenna installed............................................................................... 6
Damaged springs or pins in internal antenna ............................................................ 6
Obstructed RF feed and ground pads for the internal antenna.................................. 7
Issue 1 09/2002 Nokia Corporation Confidential Page 3
RH-10
Troubleshooting -- Antenna CCS Technical Documentation
Page 4 Nokia Corporation Confidential Issue 1 09/2002
RH-10
CCS Technical Documentation Troubleshooting -- Antenna
Introduction
This troubleshooting guide addresses potential failures that will affect the antenna per-
formance of the phone, and discusses how to correct these failures.
For additional information, refer to Diva Antenna RF Specifications and Plan
(DHS02167-EN-1.0)
Failures and Corrective Measures
Internal antenna not installed
A normal Diva antenna is shown in Figure 1. Figure 2 shows an internal antenna prop-
erly installed into the D-cover.
Figure 1: Normal Diva antenna
Figure 2: Internal antenna properly installed in D cover
Issue 1 09/2002 Nokia Corporation Confidential Page 5
RH-10
Troubleshooting -- Antenna CCS Technical Documentation
If the internal antenna is missing, install one. If the radiator looks obviously damaged,
then replace the internal antenna.
If no internal antenna is installed, the antenna gain will be degraded by more than
25 dB.
Wrong internal antenna installed
Figure 3 shows a Giovanni internal antenna.
Figure 3: Giovanni internal antenna
If the wrong antenna is installed, install the correct one.
The correct internal antenna can be determined by looking at the sheet metal radiator.
The radiator on the Diva antenna (Figure 1) is different from the Giovanni antenna (Fig-
ure 3). Installing the incorrect antenna will only change the antenna gain by about 1 dB,
but the phone will not be compliant with our FCC submission.
Damaged springs or pins in internal antenna
Figure 4 shows the pins of the internal antenna. Figure 5 focuses on the springs for the
pins of the internal antenna.
Figure 4: RF Pin and ground pin of Diva internal antenna
Page 6 Nokia Corporation Confidential Issue 1 09/2002
RH-10
CCS Technical Documentation Troubleshooting -- Antenna
Figure 5: Springs for pins of Diva internal antenna
If either pin is pushed in, such that the pin is not clearly visible, as in Figure 4, then it is
likely that the pins will not touch the PWB. If the springs are visibly bent upwards (as
shown in Figure 5), then it is likely that the pins will not touch the PWB. If the pin gets
stuck or has excessive friction in the plastic tube/guiding feature, then the spring will
not work properly. In these situations, the antenna should be replaced.
If the RF feed doesn't touch the PWB then the antenna gain will degrade by more than
25 dB. If the ground pin doesn't touch the PWB, then the antenna gain may degrade
about 5 to 10 dB.
Obstructed RF feed and ground pads for the internal antenna
Figure 6 shows the location of the RF feed and ground pads for the internal antenna.
Figure 6: PWB layout of RF feed and ground pads
If the RF feed pad is obstructed, removed, or covered, then the RF feed pin will not touch
the PWB and the antenna gain will degrade by more than 25 dB. If corrosion is present,
then most likely the PWB and phone needs to be replaced. If the ground pad is
obstructed, removed, or covered, the ground pin will not touch the PWB, and the
antenna gain may degrade about 5 to 10 dB. In both of these cases, the pad should be
cleared and/or cleaned.
If the RF connector is damaged or missing, then a new RF connector needs to be
installed. A missing or broken RF connector breaks the RF path and will result in 25 dB
or more degradation in the antenna performance.
Issue 1 09/2002 Nokia Corporation Confidential Page 7
RH-10
Troubleshooting -- Antenna CCS Technical Documentation
If the RF trace is broken, then the PWB must be replaced. A broken RF trace will result in
25 dB or more degradation in the antenna performance.
Page 8 Nokia Corporation Confidential Issue 1 09/2002
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo