Service Manuals, User Guides, Schematic Diagrams or docs for : NOKIA Mobile Phone 30 01-tme3-front

<< Back | Home

Most service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.

Image preview - the first page of the document

>> Download 01-tme3-front documenatation <<

Text preview - extract from the document

Customer Care Services
Technical Documentation

SERVICE
MANUAL
[Issue 1 NMP Part No. 0275578]
[Issue 2 NMP Part No. 0275684]
[Issue 3 NMP Part No. 0275731]
[Issue 4 NMP Part No. 0276061]

TME-3 GSM Connectivity
Terminal
-Nokia 30-

Company Confidential

Issue 4 11/2003 Copyright 2002, 2003 Nokia Corporation. All Rights Reserved
Customer Care Services
Technical Documentation

Amendment Record Sheet
Amend
Inserted
ment Date Comments
By
No
04/2002 OJuntunen
Issue 2 11/2002 OJuntunen Front section p.1&2 updated
General information:
pp,1&2, 5 to 7, 1o to 12 updated
System module:
pp 1, 5,12, 19, 29 to 40 updated
Variants: list on p. 4 updated
Service Software: all updated , 44 pages
Service Tools: all updated, 24 pages
Accessories:XRM-1 and ACW-5 updated, pp. 1-8
Issue 3 10/2003 OJ/ Front section pp.1-4 updated
General information:
pp. 4 to 7 updated, repaginated
Variants: pp.4, 7 lists updated
Service Software:pp.1-4, 40, 43 updated, pp. 44 to
47 SB-1 data added , repaginated
Service Tools: pp. 1-4 updated,
p.6,7 JBV-1 pic added,
p.12 CA-10DS pic added,
p.14 SB-1 data, pp.18, 22 updated,
pp. 24-28 test instructions added
Disassembly/Troubleshooting: p. 6 and 8 updated
Accessories: p.4 XRM-1 code updated, p.7 DAU-12
pic updated
Tuning , Flashing. Final Testing Instructions front
page updated p. 1
Issue 4 12/2003 OJ/ Front section pp.1-4 updated
4 System module:pp 1-4 updated
4 12/2003 OJ Schematic Diagrams: RL7_11 added,

Issue 4 11/2003 Copyright 2002, 2003 Nokia Corporation. All Rights Reserved
Customer Care Services
Technical Documentation

Service Manual Structure

General Information

Modules

Variants

Service Software Instructions

Service Tools

Disassembly / Troubleshooting

Accessories

Tuning. Flashing and Final Testing Instructions

Schematic Diagrams

Issue 4 11/2003 Copyright 2002, 2003 Nokia Corporation. All Rights Reserved
Customer Care Services
Technical Documentation

IMPORTANT
This document is intended for use by qualified service personnel only.

Company Policy
Our policy is of continuous development; details of all technical modifications will be
included with service bulletins.

While every endeavour has been made to ensure the accuracy of this document, some
errors may exist. If any errors are found by the reader, NOKIA MOBILE PHONES Ltd
should be notified in writing.

Please state:
Title of the Document + Issue Number/Date of publication
Latest Amendment Number (if applicable)
Page(s) and/or Figure(s) in error

Please send to:Nokia Mobile Phones Ltd
PAMS Technical Documentation
PO Box 86
FIN-24101 SALO
Finland

Warnings and Cautions
Please refer to the phone's user guide for instructions relating to operation, care and
maintenance including important safety information. Note also the following:
Warnings:
1. CARE MUST BE TAKEN ON INSTALLATION IN VEHICLES FITTED WITH ELEC-
TRONIC ENGINE MANAGEMENT SYSTEMS AND ANTI-SKID BRAKING SYS-
TEMS. UNDER CERTAIN FAULT CONDITIONS, EMITTED RF ENERGY CAN
AFFECT THEIR OPERATION. IF NECESSARY, CONSULT THE VEHICLE DEALER/
MANUFACTURER TO DETERMINE THE IMMUNITY OF VEHICLE ELECTRONIC
SYSTEMS TO RF ENERGY.
2. THE HANDPORTABLE TELEPHONE MUST NOT BE OPERATED IN AREAS LIKELY
TO CONTAIN POTENTIALLY EXPLOSIVE ATMOSPHERES EG PETROL STATIONS
(SERVICE STATIONS), BLASTING AREAS ETC.
3. OPERATION OF ANY RADIO TRANSMITTING EQUIPMENT, INCLUDING CELLU-
LAR TELEPHONES, MAY INTERFERE WITH THE FUNCTIONALITY OF INADE-
QUATELY PROTECTED MEDICAL DEVICES. CONSULT A PHYSICIAN OR THE
MANUFACTURER OF THE MEDICAL DEVICE IF YOU HAVE ANY QUESTIONS.
OTHER ELECTRONIC EQUIPMENT MAY ALSO BE SUBJECT TO INTERFERENCE.

Cautions:
1. Servicing and alignment must be undertaken by qualified personnel only.
2. Ensure all work is carried out at an anti-static workstation and that an anti-
static wrist strap is worn.
3. Ensure solder, wire, or foreign matter does not enter the telephone as dam-
age may result.
4. Use only approved components as specified in the parts list.
5. Ensure all components, modules screws and insulators are correctly re-fit-
ted after servicing and alignment. Ensure all cables and wires are reposi-
tioned correctly.

ESD Protection

Nokia requires that phone repair places have sufficient ESD protection
(against static electricity) when servicing cellular phones.
A cellular phone, which is ready for use, can be handled normally without ESD
protection. The SIM card and battery can be replaced in normal conditions of
use.
To replace the color cover ESD protection must be applied, except for the
phone covers which can be replaced by the customer.
All electronic parts of the phone , including the display, are susceptible to ESD.
Resistors, too, can be damaged by static electricity discharge.
All ESD sensitive parts must be packed in metallized protective bags during
shipping and handling outside any ESD Protected Area (EPA).
Every repair action involving opening the phone or handling the phone compo-
nents must be done under ESD protection.
ESD protected spare part packages MUST NOT be opened/closed out of an
EPA.

For more detailed information about ESD protection and EPA, contact your
local Nokia After Market Services representative.

◦ Jabse Service Manual Search 2026 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo