Service Manuals, User Guides, Schematic Diagrams or docs for : NOKIA Mobile Phone Nokia_3210 NSE8-031
<< Back | HomeMost service manuals and schematics are PDF files, so You will need Adobre Acrobat Reader to view : Acrobat Download Some of the files are DjVu format. Readers and resources available here : DjVu Resources
For the compressed files, most common are zip and rar. Please, extract files with Your favorite compression software ( WinZip, WinRAR ... ) before viewing. If a document has multiple parts, You should download all, before extracting.
Good luck. Repair on Your own risk. Make sure You know what You are doing.
Image preview - the first page of the document
>> Download NSE8-031 documenatation <<
Text preview - extract from the document
CONFIDENTIAL 1 (2)
Nokia Mobile Phones Service Bulletin No. SB-031/15.02.00
Technical Support, Europe & Africa
NSE-8
NEW SERVICE SOFTWARE VERSION 271.01.00
New service software version 271.01.00 has been released for NSE-8
phones.
Changes made from version 241.11.00 to version 271.01.00:
- Multi SIM Locks handling in Phone Identity dialog improved
- Channel numbers editable in TX power side channel tuning
- Product specific delay before software reset added.
- Support for non continuous SIM lock programming data (France Telecom)
- Factory settings are now always done in local mode
- Support for ROM-6 added
- During flashing user is warned, if FLS-1 licenses are below warning limit
- In MCU Self-test's dialog "Failed" text is replaces with more visible
"**Failed**"
- Cancel selection added to Restore Defaults prompt after flashing
- Old GSM and T9 files are deleted before saving user settings during
flashing
- In Warranty State month zero is no longer accepted
- Notices much faster, if SIM is not inserted in SCM edit dialog
- Fixed cases where TX power level was not always correct when TX I/O
tuning is started. BASE and TEST levels removed from power level
selection in TX I/O Tuning dialog
- In MCU Self tests dialog fixed power off dialog title
- User setting recovery from failed flashing
- User settings are tried to write phone a bit harder (retry)
- After flashing self-tests testing and flash authority id is retried after reset,
if they at first fail
- DSP Alive test added after flash
- Improvement when flashing with NT (ealier rubbish was written to
TESLA.INI during flashing with NT)
- Erase limits can be market area specific
- Target base level is updated when base level calculation is used while
tuning TX power levels
- Saving is enabled after calculate, if levels are in order while tuning TX
power levels
- GoNoGo test interface support added
- Improvement to auto lock information displaying
- Sleep Test supports multiple tests without closing dialog
- User is asked to put power on after power off test in Sleep Test
- IMEI and SIM Locks can be set once with Both button in Phone Identity
dialog
- Check box for manual entry added in Phone Identity dialog
NSE-8 SB-031
CONFIDENTIAL 2 (2)
- ActRepair entry is changed to C:\temp in TESLA.INI
- Multiline dealer notes are saved correctly during flashing
- Audio levels increased to 255 in Internal Audio Test dialog and set default
frequency
- TXC Compensation removed from Tuning menu
CODE DESCRIPTION
0775212 SERVICE SW NSE-8/9 3'' DISK
Note: Before installing the Service Software, make sure that you have
installed WinTesla application version 6.03 or later.
NSE-8 SB-031
◦ Jabse Service Manual Search 2024 ◦ Jabse Pravopis ◦ onTap.bg ◦ Other service manual resources online : Fixya ◦ eServiceinfo